Rev 4026 | Rev 4284 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed
/*
* Copyright (c) 2006 Josef Cejka
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup kbd_port
* @ingroup kbd
* @{
*/
/** @file
* @brief NS16550 port driver.
*/
#include <ipc/ipc.h>
#include <async.h>
#include <sysinfo.h>
#include <kbd.h>
#include <kbd_port.h>
#include <ddi.h>
/* NS16550 registers */
#define RBR_REG 0 /** Receiver Buffer Register. */
#define IER_REG 1 /** Interrupt Enable Register. */
#define IIR_REG 2 /** Interrupt Ident Register (read). */
#define FCR_REG 2 /** FIFO control register (write). */
#define LCR_REG 3 /** Line Control register. */
#define MCR_REG 4 /** Modem Control Register. */
#define LSR_REG 5 /** Line Status Register. */
#define LSR_DATA_READY 0x01
static irq_cmd_t ns16550_cmds[] = {
{
.cmd = CMD_PIO_READ_8,
.addr = (void *) 0, /* will be patched in run-time */
.dstarg = 1
},
{
.cmd = CMD_BTEST,
.value = LSR_DATA_READY,
.srcarg = 1,
.dstarg = 3
},
{
.cmd = CMD_PREDICATE,
.value = 2,
.srcarg = 3
},
{
.cmd = CMD_PIO_READ_8,
.addr = (void *) 0, /* will be patched in run-time */
.dstarg = 2
},
{
.cmd = CMD_ACCEPT
}
};
irq_code_t ns16550_kbd = {
sizeof(ns16550_cmds) / sizeof(irq_cmd_t),
ns16550_cmds
};
static void ns16550_irq_handler(ipc_callid_t iid, ipc_call_t *call);
static uintptr_t ns16550_physical;
static uintptr_t ns16550_kernel;
int kbd_port_init(void)
{
void *vaddr;
async_set_interrupt_received(ns16550_irq_handler);
ns16550_physical = sysinfo_value("kbd.address.physical");
ns16550_kernel = sysinfo_value("kbd.address.kernel");
ns16550_kbd.cmds[0].addr = (void *) (ns16550_kernel + LSR_REG);
ns16550_kbd.cmds[3].addr = (void *) (ns16550_kernel + RBR_REG);
ipc_register_irq(sysinfo_value("kbd.inr"), device_assign_devno(),
0, &ns16550_kbd);
return pio_enable((void *) ns16550_physical, 8, &vaddr);
}
static void ns16550_irq_handler(ipc_callid_t iid, ipc_call_t *call)
{
int scan_code = IPC_GET_ARG2(*call);
kbd_push_scancode(scan_code);
}
/**
* @}
*/