Subversion Repositories HelenOS

Rev

Rev 4530 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Jiri Svoboda
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup bd
  30.  * @{
  31.  */
  32.  
  33. /**
  34.  * @file
  35.  * @brief ATA disk driver
  36.  *
  37.  * This driver currently works only with CHS addressing and uses PIO.
  38.  * Currently based on the (now obsolete) ANSI X3.221-1994 (ATA-1) standard.
  39.  * At this point only reading is possible, not writing.
  40.  */
  41.  
  42. #include <stdio.h>
  43. #include <libarch/ddi.h>
  44. #include <ddi.h>
  45. #include <ipc/ipc.h>
  46. #include <ipc/bd.h>
  47. #include <async.h>
  48. #include <as.h>
  49. #include <futex.h>
  50. #include <devmap.h>
  51. #include <sys/types.h>
  52. #include <errno.h>
  53.  
  54. #define NAME "ata_bd"
  55.  
  56. enum {
  57.     CTL_READ_START  = 0,
  58.     CTL_WRITE_START = 1,
  59. };
  60.  
  61. enum {
  62.     STATUS_FAILURE  = 0
  63. };
  64.  
  65. enum {
  66.     MAX_DISKS   = 2
  67. };
  68.  
  69. typedef union {
  70.     /* Read */
  71.     struct {
  72.         uint8_t data_port;
  73.         uint8_t error;
  74.         uint8_t sector_count;
  75.         uint8_t sector_number;
  76.         uint8_t cylinder_low;
  77.         uint8_t cylinder_high;
  78.         uint8_t drive_head;
  79.         uint8_t status;
  80.     };
  81.  
  82.     /* Write */
  83.     struct {
  84.         uint8_t pad0[7];
  85.         uint8_t command;
  86.     };
  87. } ata_cmd_t;
  88.  
  89. typedef union {
  90.     /* Read */
  91.     struct {
  92.         uint8_t pad0[6];
  93.         uint8_t alt_status;
  94.         uint8_t drive_address;
  95.     };
  96.  
  97.     /* Write */
  98.     struct {
  99.         uint8_t pad1[6];
  100.         uint8_t device_control;
  101.         uint8_t pad2;
  102.     };
  103. } ata_ctl_t;
  104.  
  105. enum devctl_bits {
  106.     DCR_SRST    = 0x04, /**< Software Reset */
  107.     DCR_nIEN    = 0x02  /**< Interrupt Enable (negated) */
  108. };
  109.  
  110. enum status_bits {
  111.     SR_BSY      = 0x80, /**< Busy */
  112.     SR_DRDY     = 0x40, /**< Drive Ready */
  113.     SR_DWF      = 0x20, /**< Drive Write Fault */
  114.     SR_DSC      = 0x10, /**< Drive Seek Complete */
  115.     SR_DRQ      = 0x08, /**< Data Request */
  116.     SR_CORR     = 0x04, /**< Corrected Data */
  117.     SR_IDX      = 0x02, /**< Index */
  118.     SR_ERR      = 0x01  /**< Error */
  119. };
  120.  
  121. enum drive_head_bits {
  122.     DHR_DRV     = 0x10
  123. };
  124.  
  125. enum error_bits {
  126.     ER_BBK      = 0x80, /**< Bad Block Detected */
  127.     ER_UNC      = 0x40, /**< Uncorrectable Data Error */
  128.     ER_MC       = 0x20, /**< Media Changed */
  129.     ER_IDNF     = 0x10, /**< ID Not Found */
  130.     ER_MCR      = 0x08, /**< Media Change Request */
  131.     ER_ABRT     = 0x04, /**< Aborted Command */
  132.     ER_TK0NF    = 0x02, /**< Track 0 Not Found */
  133.     ER_AMNF     = 0x01  /**< Address Mark Not Found */
  134. };
  135.  
  136. static const size_t block_size = 512;
  137. static size_t comm_size;
  138.  
  139. static uintptr_t cmd_physical = 0x1f0;
  140. static uintptr_t ctl_physical = 0x170;
  141. static ata_cmd_t *cmd;
  142. static ata_ctl_t *ctl;
  143.  
  144. static dev_handle_t dev_handle[MAX_DISKS];
  145.  
  146. static atomic_t dev_futex = FUTEX_INITIALIZER;
  147.  
  148. static unsigned heads, cylinders, sectors;
  149. static uint64_t disk_blocks;
  150.  
  151. static int ata_bd_init(void);
  152. static void ata_bd_connection(ipc_callid_t iid, ipc_call_t *icall);
  153. static int ata_bd_rdwr(int disk_id, ipcarg_t method, off_t offset, off_t size,
  154.     void *buf);
  155. static int ata_bd_read_block(int disk_id, uint64_t blk_idx, size_t blk_cnt,
  156.     void *buf);
  157.  
  158. int main(int argc, char **argv)
  159. {
  160.     uint8_t status;
  161.     uint16_t data;
  162.     int i;
  163.  
  164.     printf(NAME ": ATA disk driver\n");
  165.  
  166.     printf("cmd_physical = 0x%x\n", cmd_physical);
  167.     printf("ctl_physical = 0x%x\n", ctl_physical);
  168.  
  169.     if (ata_bd_init() != EOK)
  170.         return -1;
  171.  
  172.     /* Put drives to reset, disable interrupts. */
  173.     printf("Reset drives...\n");
  174.     pio_write_8(&ctl->device_control, DCR_SRST);
  175. /*  printf("wait for busy\n");
  176.     do {
  177.         status = pio_read_8(&cmd->status);
  178.     } while ((status & SR_BSY) == 0);
  179. */
  180.     async_usleep(100);
  181.     pio_write_8(&ctl->device_control, 0);
  182.  
  183.     do {
  184.         status = pio_read_8(&cmd->status);
  185.     } while ((status & SR_BSY) != 0);
  186.     printf("Done\n");
  187.  
  188.     printf("Status = 0x%x\n", pio_read_8(&cmd->status));
  189.  
  190.     printf("Issue drive_identify command\n");
  191.     pio_write_8(&cmd->drive_head, 0x00);
  192.     async_usleep(100);
  193.     pio_write_8(&cmd->command, 0xEC);
  194.  
  195.     printf("Status = 0x%x\n", pio_read_8(&cmd->status));
  196.  
  197.     for (i = 0; i < 256; i++) {
  198.         do {
  199.             status = pio_read_8(&cmd->status);
  200.         } while ((status & SR_DRDY) == 0);
  201.  
  202.         data = pio_read_16(&cmd->data_port);
  203.  
  204.         switch (i) {
  205.         case 1: cylinders = data; break;
  206.         case 3: heads = data; break;
  207.         case 6: sectors = data; break;
  208.         }
  209.     }
  210.  
  211.     printf("\n\nStatus = 0x%x\n", pio_read_8(&cmd->status));
  212.  
  213.     printf("Geometry: %u cylinders, %u heads, %u sectors\n",
  214.         cylinders, heads, sectors);
  215.     disk_blocks = cylinders * heads * sectors;
  216.  
  217.     printf(NAME ": Accepting connections\n");
  218.     async_manager();
  219.  
  220.     /* Not reached */
  221.     return 0;
  222. }
  223.  
  224. static int ata_bd_init(void)
  225. {
  226.     void *vaddr;
  227.     int rc, i;
  228.     char name[16];
  229.  
  230.     rc = devmap_driver_register(NAME, ata_bd_connection);
  231.     if (rc < 0) {
  232.         printf(NAME ": Unable to register driver.\n");
  233.         return rc;
  234.     }
  235.  
  236.     rc = pio_enable((void *) cmd_physical, sizeof(ata_cmd_t), &vaddr);
  237.     if (rc != EOK) {
  238.         printf(NAME ": Could not initialize device I/O space.\n");
  239.         return rc;
  240.     }
  241.  
  242.     cmd = vaddr;
  243.  
  244.     rc = pio_enable((void *) ctl_physical, sizeof(ata_ctl_t), &vaddr);
  245.     if (rc != EOK) {
  246.         printf(NAME ": Could not initialize device I/O space.\n");
  247.         return rc;
  248.     }
  249.  
  250.     ctl = vaddr;
  251.  
  252.     for (i = 0; i < MAX_DISKS; i++) {
  253.         snprintf(name, 16, "disk%d", i);
  254.         rc = devmap_device_register(name, &dev_handle[i]);
  255.         if (rc != EOK) {
  256.             devmap_hangup_phone(DEVMAP_DRIVER);
  257.             printf(NAME ": Unable to register device %s.\n",
  258.                 name);
  259.             return rc;
  260.         }
  261.     }
  262.  
  263.     return EOK;
  264. }
  265.  
  266. static void ata_bd_connection(ipc_callid_t iid, ipc_call_t *icall)
  267. {
  268.     void *fs_va = NULL;
  269.     ipc_callid_t callid;
  270.     ipc_call_t call;
  271.     ipcarg_t method;
  272.     dev_handle_t dh;
  273.     int flags;
  274.     int retval;
  275.     off_t idx;
  276.     off_t size;
  277.     int disk_id, i;
  278.  
  279.     /* Get the device handle. */
  280.     dh = IPC_GET_ARG1(*icall);
  281.  
  282.     /* Determine which disk device is the client connecting to. */
  283.     disk_id = -1;
  284.     for (i = 0; i < MAX_DISKS; i++)
  285.         if (dev_handle[i] == dh)
  286.             disk_id = i;
  287.  
  288.     if (disk_id < 0) {
  289.         ipc_answer_0(iid, EINVAL);
  290.         return;
  291.     }
  292.  
  293.     /* Answer the IPC_M_CONNECT_ME_TO call. */
  294.     ipc_answer_0(iid, EOK);
  295.  
  296.     if (!ipc_share_out_receive(&callid, &comm_size, &flags)) {
  297.         ipc_answer_0(callid, EHANGUP);
  298.         return;
  299.     }
  300.  
  301.     fs_va = as_get_mappable_page(comm_size);
  302.     if (fs_va == NULL) {
  303.         ipc_answer_0(callid, EHANGUP);
  304.         return;
  305.     }
  306.  
  307.     (void) ipc_share_out_finalize(callid, fs_va);
  308.  
  309.     while (1) {
  310.         callid = async_get_call(&call);
  311.         method = IPC_GET_METHOD(call);
  312.         switch (method) {
  313.         case IPC_M_PHONE_HUNGUP:
  314.             /* The other side has hung up. */
  315.             ipc_answer_0(callid, EOK);
  316.             return;
  317.         case BD_READ_BLOCK:
  318.         case BD_WRITE_BLOCK:
  319.             idx = IPC_GET_ARG1(call);
  320.             size = IPC_GET_ARG2(call);
  321.             if (size > comm_size) {
  322.                 retval = EINVAL;
  323.                 break;
  324.             }
  325.             retval = ata_bd_rdwr(disk_id, method, idx,
  326.                 size, fs_va);
  327.             break;
  328.         default:
  329.             retval = EINVAL;
  330.             break;
  331.         }
  332.         ipc_answer_0(callid, retval);
  333.     }
  334. }
  335.  
  336. static int ata_bd_rdwr(int disk_id, ipcarg_t method, off_t blk_idx, off_t size,
  337.     void *buf)
  338. {
  339.     int rc;
  340.     off_t now;
  341.  
  342.     while (size > 0) {
  343.         now = size < block_size ? size : (off_t) block_size;
  344.         if (now != block_size)
  345.             return EINVAL;
  346.  
  347.         if (method == BD_READ_BLOCK)
  348.             rc = ata_bd_read_block(disk_id, blk_idx, 1, buf);
  349.         else
  350.             rc = ENOTSUP;
  351.  
  352.         if (rc != EOK)
  353.             return rc;
  354.  
  355.         buf += block_size;
  356.         blk_idx++;
  357.  
  358.         if (size > block_size)
  359.             size -= block_size;
  360.         else
  361.             size = 0;
  362.     }
  363.  
  364.     return EOK;
  365. }
  366.  
  367.  
  368. static int ata_bd_read_block(int disk_id, uint64_t blk_idx, size_t blk_cnt,
  369.     void *buf)
  370. {
  371.     size_t i;
  372.     uint16_t data;
  373.     uint8_t status;
  374.     uint64_t c, h, s;
  375.     uint64_t idx;
  376.     uint8_t drv_head;
  377.  
  378.     /* Check device bounds. */
  379.     if (blk_idx >= disk_blocks)
  380.         return EINVAL;
  381.  
  382.     /* Compute CHS. */
  383.     c = blk_idx / (heads * sectors);
  384.     idx = blk_idx % (heads * sectors);
  385.  
  386.     h = idx / sectors;
  387.     s = 1 + (idx % sectors);
  388.  
  389.     /* New value for Drive/Head register */
  390.     drv_head =
  391.         ((disk_id != 0) ? DHR_DRV : 0) |
  392.         (h & 0x0f);
  393.  
  394.     futex_down(&dev_futex);
  395.  
  396.     /* Program a Read Sectors operation. */
  397.  
  398.     pio_write_8(&cmd->drive_head, drv_head);
  399.     pio_write_8(&cmd->sector_count, 1);
  400.     pio_write_8(&cmd->sector_number, s);
  401.     pio_write_8(&cmd->cylinder_low, c & 0xff);
  402.     pio_write_8(&cmd->cylinder_high, c >> 16);
  403.     pio_write_8(&cmd->command, 0x20);
  404.  
  405.     /* Read data from the disk buffer. */
  406.  
  407.     for (i = 0; i < 256; i++) {
  408.         do {
  409.             status = pio_read_8(&cmd->status);
  410.         } while ((status & SR_DRDY) == 0);
  411.  
  412.         data = pio_read_16(&cmd->data_port);
  413.         ((uint16_t *) buf)[i] = data;
  414.     }
  415.  
  416.     futex_up(&dev_futex);
  417.     return EOK;
  418. }
  419.  
  420.  
  421. /**
  422.  * @}
  423.  */
  424.