Subversion Repositories HelenOS

Rev

Rev 4522 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2006 Ondrej Palkovsky
  3.  * Copyright (c) 2007 Jakub Jermar
  4.  * All rights reserved.
  5.  *
  6.  * Redistribution and use in source and binary forms, with or without
  7.  * modification, are permitted provided that the following conditions
  8.  * are met:
  9.  *
  10.  * - Redistributions of source code must retain the above copyright
  11.  *   notice, this list of conditions and the following disclaimer.
  12.  * - Redistributions in binary form must reproduce the above copyright
  13.  *   notice, this list of conditions and the following disclaimer in the
  14.  *   documentation and/or other materials provided with the distribution.
  15.  * - The name of the author may not be used to endorse or promote products
  16.  *   derived from this software without specific prior written permission.
  17.  *
  18.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  19.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  20.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  21.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  22.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  23.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  27.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28.  */
  29.  
  30. /** @addtogroup libc
  31.  * @{
  32.  */
  33. /** @file
  34.  */
  35.  
  36. #include <adt/list.h>
  37. #include <fibril.h>
  38. #include <thread.h>
  39. #include <tls.h>
  40. #include <malloc.h>
  41. #include <unistd.h>
  42. #include <stdio.h>
  43. #include <libarch/faddr.h>
  44. #include <futex.h>
  45. #include <assert.h>
  46. #include <async.h>
  47.  
  48. #ifndef FIBRIL_INITIAL_STACK_PAGES_NO
  49. #define FIBRIL_INITIAL_STACK_PAGES_NO   1
  50. #endif
  51.  
  52. /**
  53.  * This futex serializes access to ready_list, serialized_list and manager_list.
  54.  */
  55. static atomic_t fibril_futex = FUTEX_INITIALIZER;
  56.  
  57. static LIST_INITIALIZE(ready_list);
  58. static LIST_INITIALIZE(serialized_list);
  59. static LIST_INITIALIZE(manager_list);
  60.  
  61. static void fibril_main(void);
  62.  
  63. /** Number of threads that are executing a manager fibril. */
  64. static int threads_in_manager;
  65. /** Number of threads that are executing a manager fibril and are serialized. */
  66. static int serialized_threads;  /* Protected by async_futex */
  67. /** Fibril-local count of serialization. If > 0, we must not preempt */
  68. static fibril_local int serialization_count;
  69.  
  70. /** Setup fibril information into TCB structure */
  71. fibril_t *fibril_setup(void)
  72. {
  73.     fibril_t *f;
  74.     tcb_t *tcb;
  75.  
  76.     tcb = __make_tls();
  77.     if (!tcb)
  78.         return NULL;
  79.  
  80.     f = malloc(sizeof(fibril_t));
  81.     if (!f) {
  82.         __free_tls(tcb);
  83.         return NULL;
  84.     }
  85.  
  86.     tcb->fibril_data = f;
  87.     f->tcb = tcb;
  88.  
  89.     f->func = NULL;
  90.     f->arg = NULL;
  91.     f->stack = NULL;
  92.     f->clean_after_me = NULL;
  93.     f->retval = 0;
  94.     f->flags = 0;
  95.  
  96.     return f;
  97. }
  98.  
  99. void fibril_teardown(fibril_t *f)
  100. {
  101.     __free_tls(f->tcb);
  102.     free(f);
  103. }
  104.  
  105. /** Function that spans the whole life-cycle of a fibril.
  106.  *
  107.  * Each fibril begins execution in this function. Then the function implementing
  108.  * the fibril logic is called.  After its return, the return value is saved.
  109.  * The fibril then switches to another fibril, which cleans up after it.
  110.  */
  111. void fibril_main(void)
  112. {
  113.     fibril_t *f = __tcb_get()->fibril_data;
  114.  
  115.     /* Call the implementing function. */
  116.     f->retval = f->func(f->arg);
  117.  
  118.     fibril_switch(FIBRIL_FROM_DEAD);
  119.     /* not reached */
  120. }
  121.  
  122. /** Switch from the current fibril.
  123.  *
  124.  * If calling with FIBRIL_TO_MANAGER parameter, the async_futex should be
  125.  * held.
  126.  *
  127.  * @param stype     Switch type. One of FIBRIL_PREEMPT, FIBRIL_TO_MANAGER,
  128.  *          FIBRIL_FROM_MANAGER, FIBRIL_FROM_DEAD. The parameter
  129.  *          describes the circumstances of the switch.
  130.  * @return      Return 0 if there is no ready fibril,
  131.  *          return 1 otherwise.
  132.  */
  133. int fibril_switch(fibril_switch_type_t stype)
  134. {
  135.     fibril_t *srcf, *dstf;
  136.     int retval = 0;
  137.    
  138.     futex_down(&fibril_futex);
  139.  
  140.     if (stype == FIBRIL_PREEMPT && list_empty(&ready_list))
  141.         goto ret_0;
  142.  
  143.     if (stype == FIBRIL_FROM_MANAGER) {
  144.         if (list_empty(&ready_list) && list_empty(&serialized_list))
  145.             goto ret_0;
  146.         /*
  147.          * Do not preempt if there is not enough threads to run the
  148.          * ready fibrils which are not serialized.
  149.          */
  150.         if (list_empty(&serialized_list) &&
  151.             threads_in_manager <= serialized_threads) {
  152.             goto ret_0;
  153.         }
  154.     }
  155.     /* If we are going to manager and none exists, create it */
  156.     if (stype == FIBRIL_TO_MANAGER || stype == FIBRIL_FROM_DEAD) {
  157.         while (list_empty(&manager_list)) {
  158.             futex_up(&fibril_futex);
  159.             async_create_manager();
  160.             futex_down(&fibril_futex);
  161.         }
  162.     }
  163.    
  164.     srcf = __tcb_get()->fibril_data;
  165.     if (stype != FIBRIL_FROM_DEAD) {
  166.         /* Save current state */
  167.         if (!context_save(&srcf->ctx)) {
  168.             if (serialization_count)
  169.                 srcf->flags &= ~FIBRIL_SERIALIZED;
  170.             if (srcf->clean_after_me) {
  171.                 /*
  172.                  * Cleanup after the dead fibril from which we
  173.                  * restored context here.
  174.                  */
  175.                 void *stack = srcf->clean_after_me->stack;
  176.                 if (stack) {
  177.                     /*
  178.                      * This check is necessary because a
  179.                      * thread could have exited like a
  180.                      * normal fibril using the
  181.                      * FIBRIL_FROM_DEAD switch type. In that
  182.                      * case, its fibril will not have the
  183.                      * stack member filled.
  184.                      */
  185.                     free(stack);
  186.                 }
  187.                 fibril_teardown(srcf->clean_after_me);
  188.                 srcf->clean_after_me = NULL;
  189.             }
  190.             return 1;   /* futex_up already done here */
  191.         }
  192.  
  193.         /* Save myself to the correct run list */
  194.         if (stype == FIBRIL_PREEMPT)
  195.             list_append(&srcf->link, &ready_list);
  196.         else if (stype == FIBRIL_FROM_MANAGER) {
  197.             list_append(&srcf->link, &manager_list);
  198.             threads_in_manager--;
  199.         } else {   
  200.             /*
  201.              * If stype == FIBRIL_TO_MANAGER, don't put ourselves to
  202.              * any list, we should already be somewhere, or we will
  203.              * be lost.
  204.              */
  205.         }
  206.     }
  207.    
  208.     /* Choose a new fibril to run */
  209.     if (stype == FIBRIL_TO_MANAGER || stype == FIBRIL_FROM_DEAD) {
  210.         dstf = list_get_instance(manager_list.next, fibril_t, link);
  211.         if (serialization_count && stype == FIBRIL_TO_MANAGER) {
  212.             serialized_threads++;
  213.             srcf->flags |= FIBRIL_SERIALIZED;
  214.         }
  215.         threads_in_manager++;
  216.  
  217.         if (stype == FIBRIL_FROM_DEAD)
  218.             dstf->clean_after_me = srcf;
  219.     } else {
  220.         if (!list_empty(&serialized_list)) {
  221.             dstf = list_get_instance(serialized_list.next, fibril_t,
  222.                 link);
  223.             serialized_threads--;
  224.         } else {
  225.             dstf = list_get_instance(ready_list.next, fibril_t,
  226.                 link);
  227.         }
  228.     }
  229.     list_remove(&dstf->link);
  230.  
  231.     futex_up(&fibril_futex);
  232.     context_restore(&dstf->ctx);
  233.     /* not reached */
  234.  
  235. ret_0:
  236.     futex_up(&fibril_futex);
  237.     return retval;
  238. }
  239.  
  240. /** Create a new fibril.
  241.  *
  242.  * @param func      Implementing function of the new fibril.
  243.  * @param arg       Argument to pass to func.
  244.  *
  245.  * @return      Return 0 on failure or TLS of the new fibril.
  246.  */
  247. fid_t fibril_create(int (*func)(void *), void *arg)
  248. {
  249.     fibril_t *f;
  250.  
  251.     f = fibril_setup();
  252.     if (!f)
  253.         return 0;
  254.     f->stack = (char *) malloc(FIBRIL_INITIAL_STACK_PAGES_NO *
  255.         getpagesize());
  256.     if (!f->stack) {
  257.         fibril_teardown(f);
  258.         return 0;
  259.     }
  260.    
  261.     f->func = func;
  262.     f->arg = arg;
  263.  
  264.     context_save(&f->ctx);
  265.     context_set(&f->ctx, FADDR(fibril_main), f->stack,
  266.         FIBRIL_INITIAL_STACK_PAGES_NO * getpagesize(), f->tcb);
  267.  
  268.     return (fid_t) f;
  269. }
  270.  
  271. /** Add a fibril to the ready list.
  272.  *
  273.  * @param fid       Pointer to the fibril structure of the fibril to be
  274.  *          added.
  275.  */
  276. void fibril_add_ready(fid_t fid)
  277. {
  278.     fibril_t *f;
  279.  
  280.     f = (fibril_t *) fid;
  281.     futex_down(&fibril_futex);
  282.     if ((f->flags & FIBRIL_SERIALIZED))
  283.         list_append(&f->link, &serialized_list);
  284.     else
  285.         list_append(&f->link, &ready_list);
  286.     futex_up(&fibril_futex);
  287. }
  288.  
  289. /** Add a fibril to the manager list.
  290.  *
  291.  * @param fid       Pointer to the fibril structure of the fibril to be
  292.  *          added.
  293.  */
  294. void fibril_add_manager(fid_t fid)
  295. {
  296.     fibril_t *f;
  297.  
  298.     f = (fibril_t *) fid;
  299.  
  300.     futex_down(&fibril_futex);
  301.     list_append(&f->link, &manager_list);
  302.     futex_up(&fibril_futex);
  303. }
  304.  
  305. /** Remove one manager from the manager list. */
  306. void fibril_remove_manager(void)
  307. {
  308.     futex_down(&fibril_futex);
  309.     if (list_empty(&manager_list)) {
  310.         futex_up(&fibril_futex);
  311.         return;
  312.     }
  313.     list_remove(manager_list.next);
  314.     futex_up(&fibril_futex);
  315. }
  316.  
  317. /** Return fibril id of the currently running fibril.
  318.  *
  319.  * @return fibril ID of the currently running fibril.
  320.  *
  321.  */
  322. fid_t fibril_get_id(void)
  323. {
  324.     return (fid_t) __tcb_get()->fibril_data;
  325. }
  326.  
  327. /** Disable preemption
  328.  *
  329.  * If the fibril wants to send several message in a row and does not want to be
  330.  * preempted, it should start async_serialize_start() in the beginning of
  331.  * communication and async_serialize_end() in the end. If it is a true
  332.  * multithreaded application, it should protect the communication channel by a
  333.  * futex as well.
  334.  *
  335.  */
  336. void fibril_inc_sercount(void)
  337. {
  338.     serialization_count++;
  339. }
  340.  
  341. /** Restore the preemption counter to the previous state. */
  342. void fibril_dec_sercount(void)
  343. {
  344.     serialization_count--;
  345. }
  346.  
  347. /** @}
  348.  */
  349.