/*
* Copyright (c) 2009 Vineeth Pillai
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup genarch
* @{
*/
/** @file
* @brief Describes the pl050 keyboard/mouse controller
*/
/**
* This file implements pl050 specific functions for keyboard and mouse
*/
#ifndef KERN_genarch_PL050_H
#define KERN_genarch_PL050_H
#include <ddi/irq.h>
#include <arch/types.h>
#include <console/chardev.h>
#include <typedefs.h>
/*
* pl050 register offsets from the base address
*/
#define PL050_CR 0x00
#define PL050_STAT 0x04
#define PL050_DATA 0x08
#define PL050_CLOCKDIV 0x0C
#define PL050_INTRSTAT 0x10
/*
* Control Register Bits
*/
#define PL050_CR_TYPE (1 << 5) /* Type 0: PS2/AT mode, 1: No Line control bit mode */
#define PL050_CR_RXINTR (1 << 4) /* Recieve Interrupt Enable */
#define PL050_CR_TXINTR (1 << 3) /* Transmit Interrupt Enable */
#define PL050_CR_INTR (1 << 2) /* Interrupt Enable */
#define PL050_CR_FKMID (1 << 1) /* Force KMI Data Low */
#define PL050_CR_FKMIC 1 /* Force KMI Clock Low */
/*
* Status register bits
*/
#define PL050_STAT_TXEMPTY (1 << 6) /* 1: Transmit register empty */
#define PL050_STAT_TXBUSY (1 << 5) /* 1: Busy, sending data */
#define PL050_STAT_RXFULL (1 << 4) /* 1: register Full */
#define PL050_STAT_RXBUSY (1 << 3) /* 1: Busy, recieving Data */
#define PL050_STAT_RXPARITY (1 << 2) /* odd parity of the last bit recieved */
#define PL050_STAT_KMIC (1 << 1) /* status of KMICLKIN */
#define PL050_STAT_KMID 1 /* status of KMIDATAIN */
/*
* Interrupt status register bits.
*/
#define PL050_TX_INTRSTAT (1 << 1) /* Transmit intr asserted */
#define PL050_RX_INTRSTAT 1 /* Recieve intr asserted */
typedef struct {
ioport8_t *base;
ioport8_t *data;
ioport8_t *status;
ioport8_t *ctrl;
} pl050_t;
typedef struct {
irq_t irq;
pl050_t *pl050;
indev_t *kbrdin;
} pl050_instance_t;
extern pl050_instance_t *pl050_init(pl050_t *, inr_t);
extern void pl050_wire(pl050_instance_t *, indev_t *);
#endif
/** @}
*/