/*
* Copyright (c) 2005 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup sparc64
* @{
*/
/** @file
*/
#ifndef KERN_sparc64_ASM_H_
#define KERN_sparc64_ASM_H_
#include <arch/arch.h>
#include <arch/types.h>
#include <typedefs.h>
#include <align.h>
#include <arch/register.h>
#include <config.h>
#include <arch/stack.h>
#include <arch/barrier.h>
static inline void outb(ioport_t port, uint8_t v)
{
*((volatile uint8_t *)(port)) = v;
memory_barrier();
}
static inline void outw(ioport_t port, uint16_t v)
{
*((volatile uint16_t *)(port)) = v;
memory_barrier();
}
static inline void outl(ioport_t port, uint32_t v)
{
*((volatile uint32_t *)(port)) = v;
memory_barrier();
}
static inline uint8_t inb(ioport_t port)
{
uint8_t rv;
rv = *((volatile uint8_t *)(port));
memory_barrier();
return rv;
}
static inline uint16_t inw(ioport_t port)
{
uint16_t rv;
rv = *((volatile uint16_t *)(port));
memory_barrier();
return rv;
}
static inline uint32_t inl(ioport_t port)
{
uint32_t rv;
rv = *((volatile uint32_t *)(port));
memory_barrier();
return rv;
}
/** Read Processor State register.
*
* @return Value of PSTATE register.
*/
static inline uint64_t pstate_read(void)
{
uint64_t v;
asm volatile ("rdpr %%pstate, %0\n" : "=r" (v));
return v;
}
/** Write Processor State register.
*
* @param v New value of PSTATE register.
*/
static inline void pstate_write(uint64_t v)
{
asm volatile ("wrpr %0, %1, %%pstate\n" : : "r" (v), "i" (0));
}
/** Read TICK_compare Register.
*
* @return Value of TICK_comapre register.
*/
static inline uint64_t tick_compare_read(void)
{
uint64_t v;
asm volatile ("rd %%tick_cmpr, %0\n" : "=r" (v));
return v;
}
/** Write TICK_compare Register.
*
* @param v New value of TICK_comapre register.
*/
static inline void tick_compare_write(uint64_t v)
{
asm volatile ("wr %0, %1, %%tick_cmpr\n" : : "r" (v), "i" (0));
}
/** Read TICK Register.
*
* @return Value of TICK register.
*/
static inline uint64_t tick_read(void)
{
uint64_t v;
asm volatile ("rdpr %%tick, %0\n" : "=r" (v));
return v;
}
/** Write TICK Register.
*
* @param v New value of TICK register.
*/
static inline void tick_write(uint64_t v)
{
asm volatile ("wrpr %0, %1, %%tick\n" : : "r" (v), "i" (0));
}
/** Read FPRS Register.
*
* @return Value of FPRS register.
*/
static inline uint64_t fprs_read(void)
{
uint64_t v;
asm volatile ("rd %%fprs, %0\n" : "=r" (v));
return v;
}
/** Write FPRS Register.
*
* @param v New value of FPRS register.
*/
static inline void fprs_write(uint64_t v)
{
asm volatile ("wr %0, %1, %%fprs\n" : : "r" (v), "i" (0));
}
/** Read SOFTINT Register.
*
* @return Value of SOFTINT register.
*/
static inline uint64_t softint_read(void)
{
uint64_t v;
asm volatile ("rd %%softint, %0\n" : "=r" (v));
return v;
}
/** Write SOFTINT Register.
*
* @param v New value of SOFTINT register.
*/
static inline void softint_write(uint64_t v)
{
asm volatile ("wr %0, %1, %%softint\n" : : "r" (v), "i" (0));
}
/** Write CLEAR_SOFTINT Register.
*
* Bits set in CLEAR_SOFTINT register will be cleared in SOFTINT register.
*
* @param v New value of CLEAR_SOFTINT register.
*/
static inline void clear_softint_write(uint64_t v)
{
asm volatile ("wr %0, %1, %%clear_softint\n" : : "r" (v), "i" (0));
}
/** Write SET_SOFTINT Register.
*
* Bits set in SET_SOFTINT register will be set in SOFTINT register.
*
* @param v New value of SET_SOFTINT register.
*/
static inline void set_softint_write(uint64_t v)
{
asm volatile ("wr %0, %1, %%set_softint\n" : : "r" (v), "i" (0));
}
/** Enable interrupts.
*
* Enable interrupts and return previous
* value of IPL.
*
* @return Old interrupt priority level.
*/
static inline ipl_t interrupts_enable(void) {
pstate_reg_t pstate;
uint64_t value;
value = pstate_read();
pstate.value = value;
pstate.ie = true;
pstate_write(pstate.value);
return (ipl_t) value;
}
/** Disable interrupts.
*
* Disable interrupts and return previous
* value of IPL.
*
* @return Old interrupt priority level.
*/
static inline ipl_t interrupts_disable(void) {
pstate_reg_t pstate;
uint64_t value;
value = pstate_read();
pstate.value = value;
pstate.ie = false;
pstate_write(pstate.value);
return (ipl_t) value;
}
/** Restore interrupt priority level.
*
* Restore IPL.
*
* @param ipl Saved interrupt priority level.
*/
static inline void interrupts_restore(ipl_t ipl) {
pstate_reg_t pstate;
pstate.value = pstate_read();
pstate.ie = ((pstate_reg_t) ipl).ie;
pstate_write(pstate.value);
}
/** Return interrupt priority level.
*
* Return IPL.
*
* @return Current interrupt priority level.
*/
static inline ipl_t interrupts_read(void) {
return (ipl_t) pstate_read();
}
/** Return base address of current stack.
*
* Return the base address of the current stack.
* The stack is assumed to be STACK_SIZE bytes long.
* The stack must start on page boundary.
*/
static inline uintptr_t get_stack_base(void)
{
uintptr_t unbiased_sp;
asm volatile ("add %%sp, %1, %0\n" : "=r" (unbiased_sp) : "i" (STACK_BIAS));
return ALIGN_DOWN(unbiased_sp, STACK_SIZE);
}
/** Read Version Register.
*
* @return Value of VER register.
*/
static inline uint64_t ver_read(void)
{
uint64_t v;
asm volatile ("rdpr %%ver, %0\n" : "=r" (v));
return v;
}
/** Read Trap Program Counter register.
*
* @return Current value in TPC.
*/
static inline uint64_t tpc_read(void)
{
uint64_t v;
asm volatile ("rdpr %%tpc, %0\n" : "=r" (v));
return v;
}
/** Read Trap Level register.
*
* @return Current value in TL.
*/
static inline uint64_t tl_read(void)
{
uint64_t v;
asm volatile ("rdpr %%tl, %0\n" : "=r" (v));
return v;
}
/** Read Trap Base Address register.
*
* @return Current value in TBA.
*/
static inline uint64_t tba_read(void)
{
uint64_t v;
asm volatile ("rdpr %%tba, %0\n" : "=r" (v));
return v;
}
/** Write Trap Base Address register.
*
* @param v New value of TBA.
*/
static inline void tba_write(uint64_t v)
{
asm volatile ("wrpr %0, %1, %%tba\n" : : "r" (v), "i" (0));
}
/** Load uint64_t from alternate space.
*
* @param asi ASI determining the alternate space.
* @param va Virtual address within the ASI.
*
* @return Value read from the virtual address in the specified address space.
*/
static inline uint64_t asi_u64_read(asi_t asi, uintptr_t va)
{
uint64_t v;
asm volatile ("ldxa [%1] %2, %0\n" : "=r" (v) : "r" (va), "i" ((unsigned) asi));
return v;
}
/** Store uint64_t to alternate space.
*
* @param asi ASI determining the alternate space.
* @param va Virtual address within the ASI.
* @param v Value to be written.
*/
static inline void asi_u64_write(asi_t asi, uintptr_t va, uint64_t v)
{
asm volatile ("stxa %0, [%1] %2\n" : : "r" (v), "r" (va), "i" ((unsigned) asi) : "memory");
}
/** Flush all valid register windows to memory. */
static inline void flushw(void)
{
asm volatile ("flushw\n");
}
/** Switch to nucleus by setting TL to 1. */
static inline void nucleus_enter(void)
{
asm volatile ("wrpr %g0, 1, %tl\n");
}
/** Switch from nucleus by setting TL to 0. */
static inline void nucleus_leave(void)
{
asm volatile ("wrpr %g0, %g0, %tl\n");
}
/** Read UPA_CONFIG register.
*
* @return Value of the UPA_CONFIG register.
*/
static inline uint64_t upa_config_read(void)
{
return asi_u64_read(ASI_UPA_CONFIG, 0);
}
extern void cpu_halt(void);
extern void cpu_sleep(void);
extern void asm_delay_loop(const uint32_t usec);
extern uint64_t read_from_ag_g7(void);
extern void write_to_ag_g6(uint64_t val);
extern void write_to_ag_g7(uint64_t val);
extern void write_to_ig_g6(uint64_t val);
extern void switch_to_userspace(uint64_t pc, uint64_t sp, uint64_t uarg);
#endif
/** @}
*/