Subversion Repositories HelenOS

Rev

Rev 2512 | Rev 2726 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

#
# Copyright (c) 2005 Jakub Jermar
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
# - The name of the author may not be used to endorse or promote products
#   derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#include <arch/register.h>
#include <arch/mm/page.h>
#include <arch/mm/asid.h>
#include <mm/asid.h>

#define RR_MASK (0xFFFFFFFF00000002)
#define RID_SHIFT 8
#define PS_SHIFT 2

#define KERNEL_TRANSLATION_I 0x0010000000000661
#define KERNEL_TRANSLATION_D 0x0010000000000661

.section K_TEXT_START, "ax"

.global kernel_image_start

stack0:
kernel_image_start:
    .auto

    # Fill TR.i and TR.d using Region Register #VRN_KERNEL

    movl r8 = (VRN_KERNEL << VRN_SHIFT)
    mov r9 = rr[r8]
    movl r10 = (RR_MASK)
    and r9 = r10, r9
    movl r10 = ((RID_KERNEL << RID_SHIFT) | (KERNEL_PAGE_WIDTH << PS_SHIFT))
    or  r9 = r10, r9
    mov rr[r8] = r9

    movl r8 = (VRN_KERNEL << VRN_SHIFT)
    mov cr.ifa = r8
    movl r10 = (KERNEL_PAGE_WIDTH << PS_SHIFT)
    mov cr.itir = r10
    movl r10 = (KERNEL_TRANSLATION_I)
    itr.i itr[r0] = r10
    movl r10 = (KERNEL_TRANSLATION_D)
    itr.d dtr[r0] = r10

    # initialize PSR
    mov psr.l = r0
    srlz.i
    srlz.d
    movl r10 = (PSR_DT_MASK | PSR_RT_MASK | PSR_IT_MASK | PSR_IC_MASK)  /* Enable paging */
    mov r9 = psr
    or r10 = r10, r9
    mov cr.ipsr = r10
    mov cr.ifs = r0
    movl r8 = paging_start
    mov cr.iip = r8
    srlz.d
    srlz.i

    .explicit
    /*
     * Return From Interupt is the only the way to fill upper half word of PSR.
     */
    rfi;;

.global paging_start
paging_start:

    /*
     * Now we are paging.
     */

    # switch to register bank 1
    bsw.1
    
    # initialize register stack
    mov ar.rsc = r0
    movl r8 = (VRN_KERNEL << VRN_SHIFT) ;;
    mov ar.bspstore = r8
    loadrs

    # initialize memory stack to some sane value
    movl r12 = stack0 ;;
    
    add r12 = -16, r12  /* allocate a scratch area on the stack */

    # initialize gp (Global Pointer) register
    movl r20 = (VRN_KERNEL << VRN_SHIFT);;
    or r20 = r20,r1;;
    movl r1 = _hardcoded_load_address
    
    /*
     * Initialize hardcoded_* variables.
     */
    movl r14 = _hardcoded_ktext_size
    movl r15 = _hardcoded_kdata_size
    movl r16 = _hardcoded_load_address ;;
    addl r17 = @gprel(hardcoded_ktext_size), gp
    addl r18 = @gprel(hardcoded_kdata_size), gp
    addl r19 = @gprel(hardcoded_load_address), gp
    addl r21 = @gprel(bootinfo), gp
    ;;
    st8 [r17] = r14
    st8 [r18] = r15
    st8 [r19] = r16
    st8 [r21] = r20

    ssm (1 << 19) ;; /* Disable f32 - f127 */
    srlz.i
    srlz.d ;;

    br.call.sptk.many b0 = arch_pre_main

    movl r18 = main_bsp ;;
    mov b1 = r18 ;;
    br.call.sptk.many b0 = b1


0:
    br 0b