Subversion Repositories HelenOS

Rev

Rev 2107 | Rev 3902 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2001-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup ia32   
  30.  * @{
  31.  */
  32. /**
  33.  * @file
  34.  * @brief   i8254 chip driver.
  35.  *
  36.  * Low level time functions.
  37.  */
  38.  
  39. #include <arch/types.h>
  40. #include <time/clock.h>
  41. #include <time/delay.h>
  42. #include <arch/cycle.h>
  43. #include <arch/interrupt.h>
  44. #include <arch/drivers/i8259.h>
  45. #include <arch/drivers/i8254.h>
  46. #include <cpu.h>
  47. #include <config.h>
  48. #include <arch/pm.h>
  49. #include <arch/asm.h>
  50. #include <arch/cpuid.h>
  51. #include <arch.h>
  52. #include <time/delay.h>
  53. #include <ddi/irq.h>
  54. #include <ddi/device.h>
  55.  
  56. #define CLK_PORT1   0x40
  57. #define CLK_PORT4   0x43
  58.  
  59. #define CLK_CONST   1193180
  60. #define MAGIC_NUMBER    1194
  61.  
  62. static irq_t i8254_irq;
  63.  
  64. static irq_ownership_t i8254_claim(void)
  65. {
  66.     return IRQ_ACCEPT;
  67. }
  68.  
  69. static void i8254_irq_handler(irq_t *irq, void *arg, ...)
  70. {
  71.     /*
  72.      * This IRQ is responsible for kernel preemption.
  73.      * Nevertheless, we are now holding a spinlock which prevents
  74.      * preemption. For this particular IRQ, we don't need the
  75.      * lock. We just release it, call clock() and then reacquire it again.
  76.      */
  77.     spinlock_unlock(&irq->lock);
  78.     clock();
  79.     spinlock_lock(&irq->lock);
  80. }
  81.  
  82. void i8254_init(void)
  83. {
  84.     irq_initialize(&i8254_irq);
  85.     i8254_irq.preack = true;
  86.     i8254_irq.devno = device_assign_devno();
  87.     i8254_irq.inr = IRQ_CLK;
  88.     i8254_irq.claim = i8254_claim;
  89.     i8254_irq.handler = i8254_irq_handler;
  90.     irq_register(&i8254_irq);
  91.    
  92.     i8254_normal_operation();
  93. }
  94.  
  95. void i8254_normal_operation(void)
  96. {
  97.     outb(CLK_PORT4, 0x36);
  98.     pic_disable_irqs(1 << IRQ_CLK);
  99.     outb(CLK_PORT1, (CLK_CONST / HZ) & 0xf);
  100.     outb(CLK_PORT1, (CLK_CONST / HZ) >> 8);
  101.     pic_enable_irqs(1 << IRQ_CLK);
  102. }
  103.  
  104. #define LOOPS 150000
  105. #define SHIFT 11
  106. void i8254_calibrate_delay_loop(void)
  107. {
  108.     uint64_t clk1, clk2;
  109.     uint32_t t1, t2, o1, o2;
  110.     uint8_t not_ok;
  111.  
  112.  
  113.     /*
  114.      * One-shot timer. Count-down from 0xffff at 1193180Hz
  115.      * MAGIC_NUMBER is the magic value for 1ms.
  116.      */
  117.     outb(CLK_PORT4, 0x30);
  118.     outb(CLK_PORT1, 0xff);
  119.     outb(CLK_PORT1, 0xff);
  120.  
  121.     do {
  122.         /* will read both status and count */
  123.         outb(CLK_PORT4, 0xc2);
  124.         not_ok = (inb(CLK_PORT1)>>6)&1;
  125.         t1 = inb(CLK_PORT1);
  126.         t1 |= inb(CLK_PORT1) << 8;
  127.     } while (not_ok);
  128.  
  129.     asm_delay_loop(LOOPS);
  130.  
  131.     outb(CLK_PORT4, 0xd2);
  132.     t2 = inb(CLK_PORT1);
  133.     t2 |= inb(CLK_PORT1) << 8;
  134.  
  135.     /*
  136.      * We want to determine the overhead of the calibrating mechanism.
  137.      */
  138.     outb(CLK_PORT4, 0xd2);
  139.     o1 = inb(CLK_PORT1);
  140.     o1 |= inb(CLK_PORT1) << 8;
  141.  
  142.     asm_fake_loop(LOOPS);
  143.  
  144.     outb(CLK_PORT4, 0xd2);
  145.     o2 = inb(CLK_PORT1);
  146.     o2 |= inb(CLK_PORT1) << 8;
  147.  
  148.     CPU->delay_loop_const =
  149.         ((MAGIC_NUMBER * LOOPS) / 1000) / ((t1 - t2) - (o1 - o2)) +
  150.         (((MAGIC_NUMBER * LOOPS) / 1000) % ((t1 - t2) - (o1 - o2)) ? 1 : 0);
  151.  
  152.     clk1 = get_cycle();
  153.     delay(1 << SHIFT);
  154.     clk2 = get_cycle();
  155.    
  156.     CPU->frequency_mhz = (clk2 - clk1) >> SHIFT;
  157.  
  158.     return;
  159. }
  160.  
  161. /** @}
  162.  */
  163.