/*
* Copyright (C) 2001-2004 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch/asm.h>
#include <context.h>
#include <print.h>
#include <panic.h>
#include <debug.h>
#include <config.h>
#include <time/clock.h>
#include <proc/scheduler.h>
#include <proc/thread.h>
#include <proc/task.h>
#include <main/kinit.h>
#include <main/version.h>
#include <console/kconsole.h>
#include <cpu.h>
#include <align.h>
#include <interrupt.h>
#include <arch/mm/memory_init.h>
#include <mm/frame.h>
#include <mm/page.h>
#include <genarch/mm/page_pt.h>
#include <mm/tlb.h>
#include <mm/as.h>
#include <mm/slab.h>
#include <synch/waitq.h>
#include <arch/arch.h>
#include <arch.h>
#include <arch/faddr.h>
#include <typedefs.h>
#include <ipc/ipc.h>
#ifdef CONFIG_SMP
#include <arch/smp/apic.h>
#include <arch/smp/mps.h>
#endif /* CONFIG_SMP */
#include <smp/smp.h>
config_t config; /**< Global configuration structure. */
context_t ctx;
/**
* These 'hardcoded' variables will be intialized by
* the linker or the low level assembler code with
* appropriate sizes and addresses.
*/
__address hardcoded_load_address = 0;
size_t hardcoded_ktext_size = 0;
size_t hardcoded_kdata_size = 0;
__address init_addr = 0;
size_t init_size = 0;
void main_bsp(void);
void main_ap(void);
/*
* These two functions prevent stack from underflowing during the
* kernel boot phase when SP is set to the very top of the reserved
* space. The stack could get corrupted by a fooled compiler-generated
* pop sequence otherwise.
*/
static void main_bsp_separated_stack(void);
#ifdef CONFIG_SMP
static void main_ap_separated_stack(void);
#endif
/** Bootstrap CPU main kernel routine
*
* Initializes the kernel by bootstrap CPU.
* This function passes control directly to
* main_bsp_separated_stack().
*
* Assuming interrupts_disable().
*
*/
void main_bsp(void)
{
__address stackaddr;
config.cpu_count = 1;
config.cpu_active = 1;
config.base = hardcoded_load_address;
config.memory_size = get_memory_size();
config.init_addr = init_addr;
config.init_size = init_size;
config.kernel_size = ALIGN_UP(hardcoded_ktext_size + hardcoded_kdata_size, PAGE_SIZE);
stackaddr = config.base + config.kernel_size;
/* Avoid placing kernel on top of init */
if (overlaps(stackaddr,CONFIG_STACK_SIZE,
config.init_addr, config.init_size)) {
stackaddr = ALIGN_UP(config.init_addr+config.init_size,
CONFIG_STACK_SIZE);
config.init_size = ALIGN_UP(config.init_size,CONFIG_STACK_SIZE) + CONFIG_STACK_SIZE;
} else {
config.kernel_size += CONFIG_STACK_SIZE;
}
context_save(&ctx);
context_set(&ctx, FADDR(main_bsp_separated_stack),
stackaddr, CONFIG_STACK_SIZE);
context_restore(&ctx);
/* not reached */
}
/** Bootstrap CPU main kernel routine stack wrapper
*
* Second part of main_bsp().
*
*/
void main_bsp_separated_stack(void)
{
task_t *k;
thread_t *t;
the_initialize(THE);
/*
* kconsole data structures must be initialized very early
* because other subsystems will register their respective
* commands.
*/
kconsole_init();
/*
* Exception handler initialization, before architecture
* starts adding its own handlers
*/
exc_init();
/*
* Memory management subsystems initialization.
*/
arch_pre_mm_init();
/* Initialize at least 1 memory segment big enough for slab to work */
frame_init();
slab_cache_init();
as_init();
page_init();
tlb_init();
arch_post_mm_init();
version_print();
printf("%P: hardcoded_ktext_size=%dK, hardcoded_kdata_size=%dK\n", config.base, hardcoded_ktext_size/1024, hardcoded_kdata_size/1024);
arch_pre_smp_init();
smp_init();
/* Slab must be initialized AFTER we know the number of processors */
slab_enable_cpucache();
printf("config.memory_size=%dM\n", config.
memory_size/(1024*1024)); printf("config.cpu_count=%d\n", config.
cpu_count); cpu_init();
calibrate_delay_loop();
timeout_init();
scheduler_init();
task_init();
thread_init();
if (config.init_size > 0)
printf("config.init_addr=%P, config.init_size=%d\n", config.
init_addr, config.
init_size);
ipc_init();
/*
* Create kernel task.
*/
k = task_create(AS_KERNEL);
if (!k)
panic("can't create kernel task\n");
/*
* Create the first thread.
*/
t = thread_create(kinit, NULL, k, 0);
if (!t)
panic("can't create kinit thread\n");
thread_ready(t);
/*
* This call to scheduler() will return to kinit,
* starting the thread of kernel threads.
*/
scheduler();
/* not reached */
}
#ifdef CONFIG_SMP
/** Application CPUs main kernel routine
*
* Executed by application processors, temporary stack
* is at ctx.sp which was set during BP boot.
* This function passes control directly to
* main_ap_separated_stack().
*
* Assuming interrupts_disable()'d.
*
*/
void main_ap(void)
{
/*
* Incrementing the active CPU counter will guarantee that the
* pm_init() will not attempt to build GDT and IDT tables again.
* Neither frame_init() will do the complete thing. Neither cpu_init()
* will do.
*/
config.cpu_active++;
/*
* The THE structure is well defined because ctx.sp is used as stack.
*/
the_initialize(THE);
arch_pre_mm_init();
frame_init();
page_init();
tlb_init();
arch_post_mm_init();
cpu_init();
calibrate_delay_loop();
l_apic_init();
l_apic_debug();
the_copy(THE, (the_t *) CPU->stack);
/*
* If we woke kmp up before we left the kernel stack, we could
* collide with another CPU coming up. To prevent this, we
* switch to this cpu's private stack prior to waking kmp up.
*/
context_set(&CPU->saved_context, FADDR(main_ap_separated_stack), (__address) CPU->stack, CPU_STACK_SIZE);
context_restore(&CPU->saved_context);
/* not reached */
}
/** Application CPUs main kernel routine stack wrapper
*
* Second part of main_ap().
*
*/
void main_ap_separated_stack(void)
{
/*
* Configure timeouts for this cpu.
*/
timeout_init();
waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
scheduler();
/* not reached */
}
#endif /* CONFIG_SMP */