Subversion Repositories HelenOS-historic

Rev

Rev 1589 | Rev 1705 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

/*
 * Copyright (C) 2006 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @defgroup ddi Device Driver Interface
 * @ingroup kernel
 * @{
 * @}
 */

 /** @addtogroup genericddi generic
 * @ingroup ddi
 * @{
 */
 
/**
 * @file
 * @brief   Device Driver Interface functions.
 *
 * This file contains functions that comprise the Device Driver Interface.
 * These are the functions for mapping physical memory and enabling I/O
 * space to tasks.
 */

#include <ddi/ddi.h>
#include <ddi/ddi_arg.h>
#include <proc/task.h>
#include <security/cap.h>
#include <mm/frame.h>
#include <mm/as.h>
#include <synch/spinlock.h>
#include <syscall/copy.h>
#include <arch.h>
#include <align.h>
#include <errno.h>

/** Map piece of physical memory into virtual address space of current task.
 *
 * @param pf Physical frame address of the starting frame.
 * @param vp Virtual page address of the starting page.
 * @param pages Number of pages to map.
 * @param flags Address space area flags for the mapping.
 *
 * @return 0 on success, EPERM if the caller lacks capabilities to use this syscall,
 *     ENOENT if there is no task matching the specified ID and ENOMEM if
 *     there was a problem in creating address space area.
 */
static int ddi_physmem_map(__address pf, __address vp, count_t pages, int flags)
{
    ipl_t ipl;
    cap_t caps;
    mem_backend_data_t backend_data;

    backend_data.base = pf;
    backend_data.frames = pages;
    
    /*
     * Make sure the caller is authorised to make this syscall.
     */
    caps = cap_get(TASK);
    if (!(caps & CAP_MEM_MANAGER))
        return EPERM;

    ipl = interrupts_disable();
    spinlock_lock(&TASK->lock);
    
    if (!as_area_create(TASK->as, flags, pages * PAGE_SIZE, vp, AS_AREA_ATTR_NONE,
        &phys_backend, &backend_data)) {
        /*
         * The address space area could not have been created.
         * We report it using ENOMEM.
         */
        spinlock_unlock(&TASK->lock);
        interrupts_restore(ipl);
        return ENOMEM;
    }
    
    /*
     * Mapping is created on-demand during page fault.
     */
    
    spinlock_unlock(&TASK->lock);
    interrupts_restore(ipl);
    return 0;
}

/** Enable range of I/O space for task.
 *
 * @param id Task ID of the destination task.
 * @param ioaddr Starting I/O address.
 * @param size Size of the enabled I/O space..
 *
 * @return 0 on success, EPERM if the caller lacks capabilities to use this syscall,
 *     ENOENT if there is no task matching the specified ID.
 */
static int ddi_iospace_enable(task_id_t id, __address ioaddr, size_t size)
{
    ipl_t ipl;
    cap_t caps;
    task_t *t;
    int rc;
    
    /*
     * Make sure the caller is authorised to make this syscall.
     */
    caps = cap_get(TASK);
    if (!(caps & CAP_IO_MANAGER))
        return EPERM;
    
    ipl = interrupts_disable();
    spinlock_lock(&tasks_lock);
    
    t = task_find_by_id(id);
    
    if (!t) {
        /*
         * There is no task with the specified ID.
         */
        spinlock_unlock(&tasks_lock);
        interrupts_restore(ipl);
        return ENOENT;
    }

    /* Lock the task and release the lock protecting tasks_btree. */
    spinlock_lock(&t->lock);
    spinlock_unlock(&tasks_lock);

    rc = ddi_iospace_enable_arch(t, ioaddr, size);
    
    spinlock_unlock(&t->lock);
    interrupts_restore(ipl);
    return rc;
}

/** Wrapper for SYS_MAP_PHYSMEM syscall.
 *
 * @param phys_base Physical base address to map
 * @param virt_base Destination virtual address
 * @param pages Number of pages
 * @param flags Flags of newly mapped pages
 *
 * @return 0 on success, otherwise it returns error code found in errno.h
 */ 
__native sys_physmem_map(__native phys_base, __native virt_base, __native pages, 
             __native flags)
{
    return (__native) ddi_physmem_map(ALIGN_DOWN((__address) phys_base, FRAME_SIZE),
                      ALIGN_DOWN((__address) virt_base, PAGE_SIZE), (count_t) pages,
                      (int) flags);
}

/** Wrapper for SYS_ENABLE_IOSPACE syscall.
 *
 * @param User space address of DDI argument structure.
 *
 * @return 0 on success, otherwise it returns error code found in errno.h
 */ 
__native sys_iospace_enable(ddi_ioarg_t *uspace_io_arg)
{
    ddi_ioarg_t arg;
    int rc;
    
    rc = copy_from_uspace(&arg, uspace_io_arg, sizeof(ddi_ioarg_t));
    if (rc != 0)
        return (__native) rc;
        
    return (__native) ddi_iospace_enable((task_id_t) arg.task_id, (__address) arg.ioaddr, (size_t) arg.size);
}

/** Disable or enable preemption.
 *
 * @param enable If non-zero, the preemption counter will be decremented, leading to potential
 *       enabling of preemption. Otherwise the preemption counter will be incremented,
 *       preventing preemption from occurring.
 *
 * @return Zero on success or EPERM if callers capabilities are not sufficient.
 */ 
__native sys_preempt_control(int enable)
{
        if (! cap_get(TASK) & CAP_PREEMPT_CONTROL)
                return EPERM;
        if (enable)
                preemption_enable();
        else
                preemption_disable();
        return 0;
}

 /** @}
 */