Subversion Repositories HelenOS-historic

Rev

Rev 1548 | Rev 1704 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2005 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. #include <arch.h>
  30. #include <arch/ski/ski.h>
  31. #include <arch/drivers/it.h>
  32. #include <arch/interrupt.h>
  33. #include <arch/barrier.h>
  34. #include <arch/asm.h>
  35. #include <arch/register.h>
  36. #include <arch/types.h>
  37. #include <arch/context.h>
  38. #include <arch/stack.h>
  39. #include <arch/mm/page.h>
  40. #include <mm/as.h>
  41. #include <config.h>
  42. #include <userspace.h>
  43. #include <console/console.h>
  44. #include <proc/uarg.h>
  45. #include <syscall/syscall.h>
  46.  
  47. static int kbd_release=0;
  48.  
  49. void arch_pre_main(void)
  50. {
  51.     /* Setup usermode init tasks. */
  52.     init.cnt = 8;
  53.     init.tasks[0].addr = INIT0_ADDRESS;
  54.     init.tasks[0].size = INIT0_SIZE;
  55.     init.tasks[1].addr = INIT0_ADDRESS + 0x400000;
  56.     init.tasks[1].size = INIT0_SIZE;
  57.     init.tasks[2].addr = INIT0_ADDRESS + 0x800000;
  58.     init.tasks[2].size = INIT0_SIZE;
  59.     init.tasks[3].addr = INIT0_ADDRESS + 0xc00000;
  60.     init.tasks[3].size = INIT0_SIZE;
  61.     init.tasks[4].addr = INIT0_ADDRESS + 0x1000000;
  62.     init.tasks[4].size = INIT0_SIZE;
  63.     init.tasks[5].addr = INIT0_ADDRESS + 0x1400000;
  64.     init.tasks[5].size = INIT0_SIZE;
  65.     init.tasks[6].addr = INIT0_ADDRESS + 0x1800000;
  66.     init.tasks[6].size = INIT0_SIZE;
  67.     init.tasks[7].addr = INIT0_ADDRESS + 0x1c00000;
  68.     init.tasks[7].size = INIT0_SIZE;
  69. }
  70.  
  71. void arch_pre_mm_init(void)
  72. {
  73.     /* Set Interruption Vector Address (i.e. location of interruption vector table). */
  74.     iva_write((__address) &ivt);
  75.     srlz_d();
  76.    
  77.     ski_init_console();
  78.     it_init(); 
  79. }
  80.  
  81. void arch_post_mm_init(void)
  82. {
  83.     ski_set_console_sysinfo();
  84. }
  85.  
  86. void arch_pre_smp_init(void)
  87. {
  88. }
  89.  
  90. void arch_post_smp_init(void)
  91. {
  92. }
  93.  
  94. /** Enter userspace and never return. */
  95. void userspace(uspace_arg_t *kernel_uarg)
  96. {
  97.     psr_t psr;
  98.     rsc_t rsc;
  99.  
  100.     psr.value = psr_read();
  101.     psr.cpl = PL_USER;
  102.     psr.i = true;               /* start with interrupts enabled */
  103.     psr.ic = true;
  104.     psr.ri = 0;             /* start with instruction #0 */
  105.     psr.bn = 1;             /* start in bank 0 */
  106.  
  107.     __asm__ volatile ("mov %0 = ar.rsc\n" : "=r" (rsc.value));
  108.     rsc.loadrs = 0;
  109.     rsc.be = false;
  110.     rsc.pl = PL_USER;
  111.     rsc.mode = 3;               /* eager mode */
  112.  
  113.     switch_to_userspace((__address) kernel_uarg->uspace_entry,
  114.                 ((__address) kernel_uarg->uspace_stack)+PAGE_SIZE-ALIGN_UP(STACK_ITEM_SIZE, STACK_ALIGNMENT),
  115.                 ((__address) kernel_uarg->uspace_stack)+PAGE_SIZE,
  116.                 (__address) kernel_uarg->uspace_uarg,
  117.                 psr.value, rsc.value);
  118.  
  119.     while (1) {
  120.         ;
  121.     }
  122. }
  123.  
  124. /** Set thread-local-storage pointer.
  125.  *
  126.  * We use r13 (a.k.a. tp) for this purpose.
  127.  */
  128. __native sys_tls_set(__native addr)
  129. {
  130.         return 0;
  131. }
  132.  
  133. /** Acquire console back for kernel
  134.  *
  135.  */
  136. void arch_grab_console(void)
  137. {
  138.     kbd_release=kbd_uspace;
  139.     kbd_uspace=0;
  140. }
  141. /** Return console to userspace
  142.  *
  143.  */
  144. void arch_release_console(void)
  145. {
  146.     kbd_uspace=kbd_release;
  147. }
  148.