Subversion Repositories HelenOS

Rev

Rev 2467 | Rev 3425 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2007 Pavel Jancik, Michal Kebrt
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup arm32mm
  30.  * @{
  31.  */
  32. /** @file
  33.  *  @brief Paging related declarations.
  34.  */
  35.  
  36. #ifndef KERN_arm32_PAGE_H_
  37. #define KERN_arm32_PAGE_H_
  38.  
  39. #include <arch/mm/frame.h>
  40. #include <mm/mm.h>
  41. #include <arch/exception.h>
  42.  
  43. #define PAGE_WIDTH  FRAME_WIDTH
  44. #define PAGE_SIZE   FRAME_SIZE
  45.  
  46. #define PAGE_COLOR_BITS 0           /* dummy */
  47.  
  48. #ifndef __ASM__
  49. #   define KA2PA(x) (((uintptr_t) (x)) - 0x80000000)
  50. #   define PA2KA(x) (((uintptr_t) (x)) + 0x80000000)
  51. #else
  52. #   define KA2PA(x) ((x) - 0x80000000)
  53. #   define PA2KA(x) ((x) + 0x80000000)
  54. #endif
  55.  
  56. #ifdef KERNEL
  57.  
  58. /* Number of entries in each level. */
  59. #define PTL0_ENTRIES_ARCH   (2 << 12)   /* 4096 */
  60. #define PTL1_ENTRIES_ARCH   0
  61. #define PTL2_ENTRIES_ARCH   0
  62. /* coarse page tables used (256 * 4 = 1KB per page) */
  63. #define PTL3_ENTRIES_ARCH   (2 << 8)    /* 256 */
  64.  
  65. /* Page table sizes for each level. */
  66. #define PTL0_SIZE_ARCH      FOUR_FRAMES
  67. #define PTL1_SIZE_ARCH      0
  68. #define PTL2_SIZE_ARCH      0
  69. #define PTL3_SIZE_ARCH      ONE_FRAME
  70.  
  71. /* Macros calculating indices into page tables for each level. */
  72. #define PTL0_INDEX_ARCH(vaddr)  (((vaddr) >> 20) & 0xfff)
  73. #define PTL1_INDEX_ARCH(vaddr)  0
  74. #define PTL2_INDEX_ARCH(vaddr)  0
  75. #define PTL3_INDEX_ARCH(vaddr)  (((vaddr) >> 12) & 0x0ff)
  76.  
  77. /* Get PTE address accessors for each level. */
  78. #define GET_PTL1_ADDRESS_ARCH(ptl0, i) \
  79.     ((pte_t *) ((((pte_level0_t *)(ptl0))[(i)]).coarse_table_addr << 10))
  80. #define GET_PTL2_ADDRESS_ARCH(ptl1, i) \
  81.     (ptl1)
  82. #define GET_PTL3_ADDRESS_ARCH(ptl2, i) \
  83.     (ptl2)
  84. #define GET_FRAME_ADDRESS_ARCH(ptl3, i) \
  85.     ((uintptr_t) ((((pte_level1_t *)(ptl3))[(i)]).frame_base_addr << 12))
  86.  
  87. /* Set PTE address accessors for each level. */
  88. #define SET_PTL0_ADDRESS_ARCH(ptl0) \
  89.     (set_ptl0_addr((pte_level0_t *) (ptl0)))
  90. #define SET_PTL1_ADDRESS_ARCH(ptl0, i, a) \
  91.     (((pte_level0_t *) (ptl0))[(i)].coarse_table_addr = (a) >> 10)
  92. #define SET_PTL2_ADDRESS_ARCH(ptl1, i, a)
  93. #define SET_PTL3_ADDRESS_ARCH(ptl2, i, a)
  94. #define SET_FRAME_ADDRESS_ARCH(ptl3, i, a) \
  95.     (((pte_level1_t *) (ptl3))[(i)].frame_base_addr = (a) >> 12)
  96.  
  97. /* Get PTE flags accessors for each level. */
  98. #define GET_PTL1_FLAGS_ARCH(ptl0, i) \
  99.     get_pt_level0_flags((pte_level0_t *) (ptl0), (index_t) (i))
  100. #define GET_PTL2_FLAGS_ARCH(ptl1, i) \
  101.     PAGE_PRESENT
  102. #define GET_PTL3_FLAGS_ARCH(ptl2, i) \
  103.     PAGE_PRESENT
  104. #define GET_FRAME_FLAGS_ARCH(ptl3, i) \
  105.     get_pt_level1_flags((pte_level1_t *) (ptl3), (index_t) (i))
  106.  
  107. /* Set PTE flags accessors for each level. */
  108. #define SET_PTL1_FLAGS_ARCH(ptl0, i, x) \
  109.     set_pt_level0_flags((pte_level0_t *) (ptl0), (index_t) (i), (x))
  110. #define SET_PTL2_FLAGS_ARCH(ptl1, i, x)
  111. #define SET_PTL3_FLAGS_ARCH(ptl2, i, x)
  112. #define SET_FRAME_FLAGS_ARCH(ptl3, i, x) \
  113.     set_pt_level1_flags((pte_level1_t *) (ptl3), (index_t) (i), (x))
  114.  
  115. /* Macros for querying the last-level PTE entries. */
  116. #define PTE_VALID_ARCH(pte) \
  117.     (*((uint32_t *) (pte)) != 0)
  118. #define PTE_PRESENT_ARCH(pte) \
  119.     (((pte_level0_t *) (pte))->descriptor_type != 0)
  120. #define PTE_GET_FRAME_ARCH(pte) \
  121.     (((pte_level1_t *) (pte))->frame_base_addr << FRAME_WIDTH)
  122. #define PTE_WRITABLE_ARCH(pte) \
  123.     (((pte_level1_t *) (pte))->access_permission_0 == \
  124.         PTE_AP_USER_RW_KERNEL_RW)
  125. #define PTE_EXECUTABLE_ARCH(pte) \
  126.     1
  127.  
  128. #ifndef __ASM__
  129.  
  130. /** Level 0 page table entry. */
  131. typedef struct {
  132.     /* 0b01 for coarse tables, see below for details */
  133.     unsigned descriptor_type : 2;
  134.     unsigned impl_specific : 3;
  135.     unsigned domain : 4;
  136.     unsigned should_be_zero : 1;
  137.  
  138.     /* Pointer to the coarse 2nd level page table (holding entries for small
  139.      * (4KB) or large (64KB) pages. ARM also supports fine 2nd level page
  140.      * tables that may hold even tiny pages (1KB) but they are bigger (4KB
  141.      * per table in comparison with 1KB per the coarse table)
  142.      */
  143.     unsigned coarse_table_addr : 22;
  144. } ATTRIBUTE_PACKED pte_level0_t;
  145.  
  146. /** Level 1 page table entry (small (4KB) pages used). */
  147. typedef struct {
  148.  
  149.     /* 0b10 for small pages */
  150.     unsigned descriptor_type : 2;
  151.     unsigned bufferable : 1;
  152.     unsigned cacheable : 1;
  153.  
  154.     /* access permissions for each of 4 subparts of a page
  155.      * (for each 1KB when small pages used */
  156.     unsigned access_permission_0 : 2;
  157.     unsigned access_permission_1 : 2;
  158.     unsigned access_permission_2 : 2;
  159.     unsigned access_permission_3 : 2;
  160.     unsigned frame_base_addr : 20;
  161. } ATTRIBUTE_PACKED pte_level1_t;
  162.  
  163.  
  164. /* Level 1 page tables access permissions */
  165.  
  166. /** User mode: no access, privileged mode: no access. */
  167. #define PTE_AP_USER_NO_KERNEL_NO    0
  168.  
  169. /** User mode: no access, privileged mode: read/write. */
  170. #define PTE_AP_USER_NO_KERNEL_RW    1
  171.  
  172. /** User mode: read only, privileged mode: read/write. */
  173. #define PTE_AP_USER_RO_KERNEL_RW    2
  174.  
  175. /** User mode: read/write, privileged mode: read/write. */
  176. #define PTE_AP_USER_RW_KERNEL_RW    3
  177.  
  178.  
  179. /* pte_level0_t and pte_level1_t descriptor_type flags */
  180.  
  181. /** pte_level0_t and pte_level1_t "not present" flag (used in descriptor_type). */
  182. #define PTE_DESCRIPTOR_NOT_PRESENT  0
  183.  
  184. /** pte_level0_t coarse page table flag (used in descriptor_type). */
  185. #define PTE_DESCRIPTOR_COARSE_TABLE 1
  186.  
  187. /** pte_level1_t small page table flag (used in descriptor type). */
  188. #define PTE_DESCRIPTOR_SMALL_PAGE   2
  189.  
  190.  
  191. /** Sets the address of level 0 page table.
  192.  *
  193.  * @param pt    Pointer to the page table to set.
  194.  */  
  195. static inline void set_ptl0_addr(pte_level0_t *pt)
  196. {
  197.     asm volatile (
  198.         "mcr p15, 0, %0, c2, c0, 0 \n"
  199.         :
  200.         : "r"(pt)
  201.     );
  202. }
  203.  
  204.  
  205. /** Returns level 0 page table entry flags.
  206.  *
  207.  *  @param pt     Level 0 page table.
  208.  *  @param i      Index of the entry to return.
  209.  */
  210. static inline int get_pt_level0_flags(pte_level0_t *pt, index_t i)
  211. {
  212.     pte_level0_t *p = &pt[i];
  213.     int np = (p->descriptor_type == PTE_DESCRIPTOR_NOT_PRESENT);
  214.  
  215.     return (np << PAGE_PRESENT_SHIFT) | (1 << PAGE_USER_SHIFT) |
  216.         (1 << PAGE_READ_SHIFT) | (1 << PAGE_WRITE_SHIFT) |
  217.         (1 << PAGE_EXEC_SHIFT) | (1 << PAGE_CACHEABLE_SHIFT);
  218. }
  219.  
  220. /** Returns level 1 page table entry flags.
  221.  *
  222.  *  @param pt     Level 1 page table.
  223.  *  @param i      Index of the entry to return.
  224.  */
  225. static inline int get_pt_level1_flags(pte_level1_t *pt, index_t i)
  226. {
  227.     pte_level1_t *p = &pt[i];
  228.  
  229.     int dt = p->descriptor_type;
  230.     int ap = p->access_permission_0;
  231.  
  232.     return ((dt == PTE_DESCRIPTOR_NOT_PRESENT) << PAGE_PRESENT_SHIFT) |
  233.         ((ap == PTE_AP_USER_RO_KERNEL_RW) << PAGE_READ_SHIFT) |
  234.         ((ap == PTE_AP_USER_RW_KERNEL_RW) << PAGE_READ_SHIFT) |
  235.         ((ap == PTE_AP_USER_RW_KERNEL_RW) << PAGE_WRITE_SHIFT) |
  236.         ((ap != PTE_AP_USER_NO_KERNEL_RW) << PAGE_USER_SHIFT) |
  237.         ((ap == PTE_AP_USER_NO_KERNEL_RW) << PAGE_READ_SHIFT) |
  238.         ((ap == PTE_AP_USER_NO_KERNEL_RW) << PAGE_WRITE_SHIFT) |
  239.         (1 << PAGE_EXEC_SHIFT) |
  240.         (p->bufferable << PAGE_CACHEABLE);
  241. }
  242.  
  243.  
  244. /** Sets flags of level 0 page table entry.
  245.  *
  246.  *  @param pt     level 0 page table
  247.  *  @param i      index of the entry to be changed
  248.  *  @param flags  new flags
  249.  */
  250. static inline void set_pt_level0_flags(pte_level0_t *pt, index_t i, int flags)
  251. {
  252.     pte_level0_t *p = &pt[i];
  253.  
  254.     if (flags & PAGE_NOT_PRESENT) {
  255.         p->descriptor_type = PTE_DESCRIPTOR_NOT_PRESENT;
  256.         /*
  257.          * Ensures that the entry will be recognized as valid when
  258.          * PTE_VALID_ARCH applied.
  259.          */
  260.         p->should_be_zero = 1;
  261.     } else {
  262.         p->descriptor_type = PTE_DESCRIPTOR_COARSE_TABLE;
  263.         p->should_be_zero = 0;
  264.     }
  265. }
  266.  
  267.  
  268. /** Sets flags of level 1 page table entry.
  269.  *
  270.  *  We use same access rights for the whole page. When page is not preset we
  271.  *  store 1 in acess_rigts_3 so that at least one bit is 1 (to mark correct
  272.  *  page entry, see #PAGE_VALID_ARCH).
  273.  *
  274.  *  @param pt     Level 1 page table.
  275.  *  @param i      Index of the entry to be changed.
  276.  *  @param flags  New flags.
  277.  */  
  278. static inline void set_pt_level1_flags(pte_level1_t *pt, index_t i, int flags)
  279. {
  280.     pte_level1_t *p = &pt[i];
  281.    
  282.     if (flags & PAGE_NOT_PRESENT) {
  283.         p->descriptor_type = PTE_DESCRIPTOR_NOT_PRESENT;
  284.         p->access_permission_3 = 1;
  285.     } else {
  286.         p->descriptor_type = PTE_DESCRIPTOR_SMALL_PAGE;
  287.         p->access_permission_3 = p->access_permission_0;
  288.     }
  289.  
  290.     p->cacheable = p->bufferable = (flags & PAGE_CACHEABLE) != 0;
  291.  
  292.     /* default access permission */
  293.     p->access_permission_0 = p->access_permission_1 =
  294.         p->access_permission_2 = p->access_permission_3 =
  295.         PTE_AP_USER_NO_KERNEL_RW;
  296.  
  297.     if (flags & PAGE_USER)  {
  298.         if (flags & PAGE_READ) {
  299.             p->access_permission_0 = p->access_permission_1 =
  300.                 p->access_permission_2 = p->access_permission_3 =
  301.                 PTE_AP_USER_RO_KERNEL_RW;
  302.         }
  303.         if (flags & PAGE_WRITE) {
  304.             p->access_permission_0 = p->access_permission_1 =
  305.                 p->access_permission_2 = p->access_permission_3 =
  306.                 PTE_AP_USER_RW_KERNEL_RW;
  307.         }
  308.     }
  309. }
  310.  
  311.  
  312. extern void page_arch_init(void);
  313.  
  314.  
  315. #endif /* __ASM__ */
  316.  
  317. #endif /* KERNEL */
  318.  
  319. #endif
  320.  
  321. /** @}
  322.  */
  323.