/*
* Copyright (c) 2006 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup sparc64
* @{
*/
/** @file
*/
#include <smp/ipi.h>
#include <cpu.h>
#include <arch.h>
#include <arch/cpu.h>
#include <arch/asm.h>
#include <config.h>
#include <mm/tlb.h>
#include <arch/interrupt.h>
#include <arch/trap/interrupt.h>
#include <arch/barrier.h>
#include <preemption.h>
#include <time/delay.h>
#include <panic.h>
/** Set the contents of the outgoing interrupt vector data.
*
* The first data item (data 0) will be set to the value of func, the
* rest of the vector will contain zeros.
*
* This is a helper function used from within the cross_call function.
*
* @param func value the first data item of the vector will be set to
*/
static inline void set_intr_w_data(void (* func)(void))
{
#if defined (US)
asi_u64_write(ASI_INTR_W, ASI_UDB_INTR_W_DATA_0, (uintptr_t) func);
asi_u64_write(ASI_INTR_W, ASI_UDB_INTR_W_DATA_1, 0);
asi_u64_write(ASI_INTR_W, ASI_UDB_INTR_W_DATA_2, 0);
#elif defined (US3)
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_0, (uintptr_t) func);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_1, 0);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_2, 0);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_3, 0);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_4, 0);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_5, 0);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_6, 0);
asi_u64_write(ASI_INTR_W, VA_INTR_W_DATA_7, 0);
#endif
}
/** Invoke function on another processor.
*
* Currently, only functions without arguments are supported.
* Supporting more arguments in the future should be no big deal.
*
* Interrupts must be disabled prior to this call.
*
* @param mid MID of the target processor.
* @param func Function to be invoked.
*/
static void cross_call(int mid, void (* func)(void))
{
uint64_t status;
bool done;
/*
* This function might enable interrupts for a while.
* In order to prevent migration to another processor,
* we explicitly disable preemption.
*/
preemption_disable();
status = asi_u64_read(ASI_INTR_DISPATCH_STATUS, 0);
if (status & INTR_DISPATCH_STATUS_BUSY)
panic("Interrupt Dispatch Status busy bit set\n");
ASSERT(!(pstate_read() & PSTATE_IE_BIT));
do {
set_intr_w_data(func);
asi_u64_write(ASI_INTR_W,
(mid << INTR_VEC_DISPATCH_MID_SHIFT) |
VA_INTR_W_DISPATCH, 0);
membar();
do {
status = asi_u64_read(ASI_INTR_DISPATCH_STATUS, 0);
} while (status & INTR_DISPATCH_STATUS_BUSY);
done = !(status & INTR_DISPATCH_STATUS_NACK);
if (!done) {
/*
* Prevent deadlock.
*/
(void) interrupts_enable();
delay(20 + (tick_read() & 0xff));
(void) interrupts_disable();
}
} while (done);
preemption_enable();
}
/*
* Deliver IPI to all processors except the current one.
*
* The sparc64 architecture does not support any group addressing
* which is found, for instance, on ia32 and amd64. Therefore we
* need to simulate the broadcast by sending the message to
* all target processors step by step.
*
* We assume that interrupts are disabled.
*
* @param ipi IPI number.
*/
void ipi_broadcast_arch(int ipi)
{
unsigned int i;
void (* func)(void);
switch (ipi) {
case IPI_TLB_SHOOTDOWN:
func = tlb_shootdown_ipi_recv;
break;
default:
panic("Unknown IPI (%d).\n", ipi);
break;
}
/*
* As long as we don't support hot-plugging
* or hot-unplugging of CPUs, we can walk
* the cpus array and read processor's MID
* without locking.
*/
for (i = 0; i < config.cpu_active; i++) {
if (&cpus[i] == CPU)
continue; /* skip the current CPU */
cross_call(cpus[i].arch.mid, func);
}
}
/** @}
*/