Subversion Repositories HelenOS

Rev

Rev 232 | Rev 267 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2001-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. #include <arch/pm.h>
  30. #include <config.h>
  31. #include <arch/types.h>
  32. #include <typedefs.h>
  33. #include <arch/interrupt.h>
  34. #include <arch/asm.h>
  35. #include <arch/context.h>
  36. #include <panic.h>
  37. #include <arch/mm/page.h>
  38. #include <mm/heap.h>
  39. #include <memstr.h>
  40. #include <arch/boot/boot.h>
  41.  
  42. /*
  43.  * Early ia32 configuration functions and data structures.
  44.  */
  45.  
  46. /*
  47.  * We have no use for segmentation so we set up flat mode. In this
  48.  * mode, we use, for each privilege level, two segments spanning the
  49.  * whole memory. One is for code and one is for data.
  50.  */
  51. struct descriptor gdt[GDT_ITEMS] = {
  52.     /* NULL descriptor */
  53.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
  54.     /* KTEXT descriptor */
  55.     { 0xffff, 0, 0, AR_PRESENT | AR_CODE | DPL_KERNEL, 0xf, 0, 0, 1, 1, 0 },
  56.     /* KDATA descriptor */
  57.     { 0xffff, 0, 0, AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_KERNEL, 0xf, 0, 0, 1, 1, 0 },
  58.     /* UTEXT descriptor */
  59.     { 0xffff, 0, 0, AR_PRESENT | AR_CODE | DPL_USER, 0xf, 0, 0, 1, 1, 0 },
  60.     /* UDATA descriptor */
  61.     { 0xffff, 0, 0, AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_USER, 0xf, 0, 0, 1, 1, 0 },
  62.     /* TSS descriptor - set up will be completed later */
  63.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
  64. };
  65.  
  66. static struct idescriptor idt[IDT_ITEMS];
  67.  
  68. static struct tss tss;
  69.  
  70. struct tss *tss_p = NULL;
  71.  
  72. /* gdtr is changed by kmp before next CPU is initialized */
  73. struct ptr_16_32 gdtr __attribute__ ((section ("K_DATA_START"))) = { .limit = sizeof(gdt), .base = KA2PA((__address) gdt - BOOT_OFFSET) };
  74. struct ptr_16_32 idtr __attribute__ ((section ("K_DATA_START"))) = { .limit = sizeof(idt), .base = KA2PA((__address) idt) };
  75.  
  76. void gdt_setbase(struct descriptor *d, __address base)
  77. {
  78.     d->base_0_15 = base & 0xffff;
  79.     d->base_16_23 = ((base) >> 16) & 0xff;
  80.     d->base_24_31 = ((base) >> 24) & 0xff;
  81. }
  82.  
  83. void gdt_setlimit(struct descriptor *d, __u32 limit)
  84. {
  85.     d->limit_0_15 = limit & 0xffff;
  86.     d->limit_16_19 = (limit >> 16) & 0xf;
  87. }
  88.  
  89. void idt_setoffset(struct idescriptor *d, __address offset)
  90. {
  91.     /*
  92.      * Offset is a linear address.
  93.      */
  94.     d->offset_0_15 = offset & 0xffff;
  95.     d->offset_16_31 = offset >> 16;
  96. }
  97.  
  98. void tss_initialize(struct tss *t)
  99. {
  100.     memsetb((__address) t, sizeof(struct tss), 0);
  101. }
  102.  
  103. /*
  104.  * This function takes care of proper setup of IDT and IDTR.
  105.  */
  106. void idt_init(void)
  107. {
  108.     struct idescriptor *d;
  109.     int i;
  110.  
  111.     for (i = 0; i < IDT_ITEMS; i++) {
  112.         d = &idt[i];
  113.  
  114.         d->unused = 0;
  115.         d->selector = selector(KTEXT_DES);
  116.  
  117.         d->access = AR_PRESENT | AR_INTERRUPT;  /* masking interrupt */
  118.  
  119.         if (i == VECTOR_SYSCALL) {
  120.             /*
  121.              * The syscall interrupt gate must be calleable from userland.
  122.              */
  123.             d->access |= DPL_USER;
  124.         }
  125.        
  126.         idt_setoffset(d, ((__address) interrupt_handlers) + i*interrupt_handler_size);
  127.         trap_register(i, null_interrupt);
  128.     }
  129.     trap_register(13, gp_fault);
  130.     trap_register( 7, nm_fault);
  131.     trap_register(12, ss_fault);
  132. }
  133.  
  134.  
  135. /* Clean IOPL(12,13) and NT(14) flags in EFLAGS register */
  136. static void clean_IOPL_NT_flags(void)
  137. {
  138.     asm
  139.     (
  140.         "pushfl;"
  141.         "pop %%eax;"
  142.         "and $0xffff8fff,%%eax;"
  143.         "push %%eax;"
  144.         "popfl;"
  145.         :
  146.         :
  147.         :"%eax"
  148.     );
  149. }
  150.  
  151. /* Clean AM(18) flag in CR0 register */
  152. static void clean_AM_flag(void)
  153. {
  154.     asm
  155.     (
  156.         "mov %%cr0,%%eax;"
  157.         "and $0xFFFBFFFF,%%eax;"
  158.         "mov %%eax,%%cr0;"
  159.         :
  160.         :
  161.         :"%eax"
  162.     );
  163. }
  164.  
  165. void pm_init(void)
  166. {
  167.     struct descriptor *gdt_p = (struct descriptor *) PA2KA(gdtr.base);
  168.  
  169.  
  170.     /*
  171.      * Update addresses in GDT and IDT to their virtual counterparts.
  172.      */
  173.     gdtr.base = KA2PA(gdtr.base);
  174.     idtr.base = (__address) idt;
  175.     __asm__ volatile ("lgdt %0\n" : : "m" (gdtr));
  176.     __asm__ volatile ("lidt %0\n" : : "m" (idtr)); 
  177.    
  178.     /*
  179.      * Each CPU has its private GDT and TSS.
  180.      * All CPUs share one IDT.
  181.      */
  182.  
  183.     if (config.cpu_active == 1) {
  184.         idt_init();
  185.         /*
  186.          * NOTE: bootstrap CPU has statically allocated TSS, because
  187.          * the heap hasn't been initialized so far.
  188.          */
  189.         tss_p = &tss;
  190.     }
  191.     else {
  192.         tss_p = (struct tss *) malloc(sizeof(struct tss));
  193.         if (!tss_p)
  194.             panic("could not allocate TSS\n");
  195.     }
  196.  
  197.     tss_initialize(tss_p);
  198.    
  199.     gdt_p[TSS_DES].access = AR_PRESENT | AR_TSS | DPL_KERNEL;
  200.     gdt_p[TSS_DES].special = 1;
  201.     gdt_p[TSS_DES].granularity = 1;
  202.    
  203.     gdt_setbase(&gdt_p[TSS_DES], (__address) tss_p);
  204.     gdt_setlimit(&gdt_p[TSS_DES], sizeof(struct tss) - 1);
  205.  
  206.     /*
  207.      * As of this moment, the current CPU has its own GDT pointing
  208.      * to its own TSS. We just need to load the TR register.
  209.      */
  210.     __asm__ volatile ("ltr %0" : : "r" ((__u16) selector(TSS_DES)));
  211.    
  212.     clean_IOPL_NT_flags();    /* Disable I/O on nonprivileged levels */
  213.     clean_AM_flag();          /* Disable alignment check */
  214. }
  215.