Subversion Repositories HelenOS

Rev

Rev 4163 | Rev 4261 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup eth
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  Ethernet module implementation.
  35.  *  @see eth.h
  36.  */
  37.  
  38. #include <async.h>
  39. #include <malloc.h>
  40. #include <mem.h>
  41. #include <stdio.h>
  42.  
  43. #include <ipc/ipc.h>
  44. #include <ipc/services.h>
  45.  
  46. #include "../../err.h"
  47. #include "../../messages.h"
  48. #include "../../modules.h"
  49.  
  50. #include "../../include/byteorder.h"
  51. #include "../../include/crc.h"
  52. #include "../../include/ethernet_lsap.h"
  53. #include "../../include/ethernet_protocols.h"
  54. #include "../../include/protocol_map.h"
  55. #include "../../netif/device.h"
  56.  
  57. #include "../../structures/measured_strings.h"
  58. #include "../../structures/packet/packet.h"
  59. #include "../../structures/packet/packet_client.h"
  60.  
  61. #include "eth.h"
  62. #include "eth_header.h"
  63. //#include "eth_messages.h"
  64. #include "eth_module.h"
  65.  
  66. #define ETH_PREFIX      ( sizeof( eth_header_t ) + sizeof( eth_header_lsap_t ) + sizeof( eth_header_snap_t ))
  67. #define ETH_SUFFIX      sizeof( eth_fcs_t )
  68. #define ETH_MAX_CONTENT 1500
  69. #define ETH_MIN_CONTENT 46
  70.  
  71. /** Returns the device identifier message parameter.
  72.  */
  73. #define IPC_GET_DEVICE( call )      ( device_id_t ) IPC_GET_ARG1( * call )
  74.  
  75. /** Returns the packet identifier message parameter.
  76.  */
  77. #define IPC_GET_PACKET( call )      ( packet_id_t ) IPC_GET_ARG2( * call )
  78.  
  79. #define IPC_GET_STATE( call )       ( device_state_t ) IPC_GET_ARG2( * call )
  80.  
  81. /** Returns the protocol service message parameter.
  82.  */
  83. #define IPC_GET_PROTO( call )       ( services_t ) IPC_GET_ARG2( * call )
  84.  
  85. /** Returns the device driver service message parameter.
  86.  */
  87. #define IPC_GET_SERVICE( call )     ( services_t ) IPC_GET_ARG2( * call )
  88.  
  89. #define IPC_GET_MTU( call )         ( size_t ) IPC_GET_ARG3( * call )
  90.  
  91. #define IPC_GET_PHONE( call )       ( int ) IPC_GET_ARG5( * call )
  92.  
  93. #define IPC_SET_ADDR( answer )      (( size_t * ) & IPC_GET_ARG1( * answer ))
  94. #define IPC_SET_PREFIX( answer )    (( size_t * ) & IPC_GET_ARG2( * answer ))
  95. #define IPC_SET_CONTENT( answer )   (( size_t * ) & IPC_GET_ARG3( * answer ))
  96. #define IPC_SET_SUFFIX( answer )    (( size_t * ) & IPC_GET_ARG4( * answer ))
  97.  
  98. typedef enum eth_addr_type  eth_addr_type_t;
  99. typedef eth_addr_type_t *   eth_addr_type_ref;
  100.  
  101. enum eth_addr_type{
  102.     ETH_LOCAL_ADDR,
  103.     ETH_BROADCAST_ADDR
  104. };
  105.  
  106. /** Ethernet global data.
  107.  */
  108. eth_globals_t   eth_globals;
  109.  
  110. /** Processes IPC messages from the registered device driver modules in an infinite loop.
  111.  *  @param iid The message identifier. Input parameter.
  112.  *  @param icall The message parameters. Input/output parameter.
  113.  */
  114. void    eth_receiver( ipc_callid_t iid, ipc_call_t * icall );
  115.  
  116. DEVICE_MAP_IMPLEMENT( eth_devices, eth_device_t )
  117.  
  118. INT_MAP_IMPLEMENT( eth_protos, eth_proto_t )
  119.  
  120. int eth_device_message( device_id_t device_id, services_t service, size_t mtu );
  121. int eth_receive_message( device_id_t device_id, packet_t packet );
  122. int eth_packet_space_message( device_id_t device_id, size_t * addr_len, size_t * prefix, size_t * content, size_t * suffix );
  123. int eth_addr_message( device_id_t device_id, eth_addr_type_t type, measured_string_ref * address );
  124. int eth_register_message( services_t service, int phone );
  125. int eth_send_message( device_id_t device_id, packet_t packet, services_t sender );
  126. int eth_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count );
  127. void    eth_receiver( ipc_callid_t iid, ipc_call_t * icall );
  128. eth_proto_ref   eth_process_packet( int dummy, packet_t packet );
  129. int eth_prepare_packet( int dummy, packet_t packet, uint8_t * src_addr, int ethertype );
  130.  
  131. int eth_initialize( void ){
  132.     ERROR_DECLARE;
  133.  
  134.     rwlock_initialize( & eth_globals.devices_lock );
  135.     rwlock_initialize( & eth_globals.protos_lock );
  136.     rwlock_write_lock( & eth_globals.devices_lock );
  137.     rwlock_write_lock( & eth_globals.protos_lock );
  138.     eth_globals.broadcast_addr = measured_string_create_bulk( "\xFF\xFF\xFF\xFF\xFF\xFF", CONVERT_SIZE( uint8_t, char, ETH_ADDR ));
  139.     if( ! eth_globals.broadcast_addr ) return ENOMEM;
  140.     ERROR_PROPAGATE( eth_devices_initialize( & eth_globals.devices ));
  141.     if( ERROR_OCCURRED( eth_protos_initialize( & eth_globals.protos ))){
  142.         eth_devices_destroy( & eth_globals.devices );
  143.         return ERROR_CODE;
  144.     }
  145.     rwlock_write_unlock( & eth_globals.protos_lock );
  146.     rwlock_write_unlock( & eth_globals.devices_lock );
  147.     return EOK;
  148. }
  149.  
  150. int eth_device_message( device_id_t device_id, services_t service, size_t mtu ){
  151.     ERROR_DECLARE;
  152.  
  153.     aid_t           message;
  154.     ipc_call_t      answer;
  155.     eth_device_ref  device;
  156.     ipcarg_t        result;
  157.     int             index;
  158.  
  159.     rwlock_write_lock( & eth_globals.devices_lock );
  160.     // an existing device?
  161.     device = eth_devices_find( & eth_globals.devices, device_id );
  162.     if( device ){
  163.         if( device->service != service ){
  164.             printf( "\nDevice %d already exists", device->device_id );
  165.             rwlock_write_unlock( & eth_globals.devices_lock );
  166.             return EEXIST;
  167.         }else{
  168.             // update mtu
  169.             device->mtu = mtu;
  170.             printf( "\nDevice %d already exists:\tMTU\t= %d", device->device_id, device->mtu );
  171.         }
  172.     }else{
  173.         // create a new device
  174.         device = ( eth_device_ref ) malloc( sizeof( eth_device_t ));
  175.         if( ! device ) return ENOMEM;
  176.         device->device_id = device_id;
  177.         device->service = service;
  178.         device->mtu = ( mtu > 0 ) ? mtu : ETH_MAX_CONTENT;
  179.         // TODO get dummy setting
  180.         device->dummy = 0;
  181.         // bind the device driver
  182.         device->phone = bind_service( device->service, device->device_id, SERVICE_ETHERNET, 0, eth_receiver );
  183.         if( device->phone < 0 ){
  184.             rwlock_write_unlock( & eth_globals.devices_lock );
  185.             free( device );
  186.             return device->phone;
  187.         }
  188.         // get hardware address
  189.         message = async_send_1( device->phone, NET_NETIF_GET_ADDR, device->device_id, & answer );
  190.         if( ERROR_OCCURRED( measured_strings_return( device->phone, & device->addr, & device->addr_data, 1 ))){
  191.             rwlock_write_unlock( & eth_globals.devices_lock );
  192.             free( device );
  193.             async_wait_for( message, NULL );
  194.             return ERROR_CODE;
  195.         }
  196.         async_wait_for( message, & result );
  197.         if( ERROR_OCCURRED( result )){
  198.             rwlock_write_unlock( & eth_globals.devices_lock );
  199.             free( device->addr );
  200.             free( device->addr_data );
  201.             free( device );
  202.             return ERROR_CODE;
  203.         }
  204.         // add to the cache
  205.         index = eth_devices_add( & eth_globals.devices, device->device_id, device );
  206.         if( index < 0 ){
  207.             rwlock_write_unlock( & eth_globals.devices_lock );
  208.             free( device->addr );
  209.             free( device->addr_data );
  210.             free( device );
  211.             return index;
  212.         }
  213.         printf( "\nNew device registered:\n\tid\t= %d\n\tservice\t= %d\n\tMTU\t= %d\n\taddress\t= %X:%X:%X:%X:%X:%X", device->device_id, device->service, device->mtu, device->addr_data[ 0 ], device->addr_data[ 1 ], device->addr_data[ 2 ], device->addr_data[ 3 ], device->addr_data[ 4 ], device->addr_data[ 5 ] );
  214.     }
  215.     rwlock_write_unlock( & eth_globals.devices_lock );
  216.     return EOK;
  217. }
  218.  
  219. eth_proto_ref eth_process_packet( int dummy, packet_t packet ){
  220.     ERROR_DECLARE;
  221.  
  222.     eth_header_ex_ref   header;
  223.     size_t              length;
  224.     int                 type;
  225.     size_t              prefix;
  226.     size_t              suffix;
  227.     eth_fcs_ref         fcs;
  228.  
  229.     length = packet_get_data_length( packet );
  230.     if( dummy ){
  231.         packet_trim( packet, sizeof( eth_preamble_t ), 0 );
  232.     }
  233.     if( length <= sizeof( eth_header_t ) + ETH_MIN_CONTENT + ETH_SUFFIX ) return NULL;
  234.     header = ( eth_header_ex_ref ) packet_get_data( packet );
  235.     type = ntohs( header->header.ethertype );
  236.     if( type >= ETH_MIN_PROTO ){
  237.         // DIX Ethernet
  238.         prefix = sizeof( eth_header_t );
  239.         suffix = sizeof( eth_fcs_t );
  240.         fcs = (( void * ) header ) + length - suffix;
  241.     }else if( type <= ETH_MAX_CONTENT ){
  242.         // translate "LSAP" values
  243.         if(( header->lsap.dsap == ETH_LSAP_GLSAP ) && ( header->lsap.ssap == ETH_LSAP_GLSAP )){
  244.             // raw packet
  245.             // discard
  246.             return NULL;
  247.         }else if(( header->lsap.dsap == ETH_LSAP_SNAP ) && ( header->lsap.ssap == ETH_LSAP_SNAP )){
  248.             // IEEE 802.3 + 802.2 + LSAP + SNAP
  249.             // organization code not supported
  250.             type = ntohs( header->snap.ethertype );
  251.             prefix = sizeof( eth_header_t ) + sizeof( eth_header_lsap_t) + sizeof( eth_header_snap_t);
  252.         }else{
  253.             // IEEE 802.3 + 802.2 LSAP
  254.             type = lsap_map( header->lsap.dsap );
  255.             prefix = sizeof( eth_header_t ) + sizeof( eth_header_lsap_t);
  256.         }
  257.         suffix = ( type < ETH_MIN_CONTENT ) ? ETH_MIN_CONTENT - type : 0;
  258.         fcs = (( void * ) header ) + prefix + type + suffix;
  259.         suffix += length - prefix - type;
  260.     }else{
  261.         // invalid length/type, should not occurr
  262.         return NULL;
  263.     }
  264.     if( dummy ){
  265.         if(( ~ compute_crc32( ~ 0, & header->header.dest, ((( void * ) fcs ) - (( void * ) & header->header.dest )) * 8 )) != ntohl( * fcs )){
  266.             return NULL;
  267.         }
  268.     }
  269.     if( ERROR_OCCURRED( packet_set_addr( packet, header->header.src, header->header.dest, ETH_ADDR ))
  270.     || ERROR_OCCURRED( packet_trim( packet, prefix, suffix ))){
  271.         return NULL;
  272.     }
  273.     return eth_protos_find( & eth_globals.protos, type );
  274. }
  275.  
  276. int eth_receive_message( device_id_t device_id, packet_t packet ){
  277.     eth_proto_ref   proto;
  278.     packet_t        next;
  279.     eth_device_ref  device;
  280.     int             dummy;
  281.  
  282.     rwlock_read_lock( & eth_globals.devices_lock );
  283.     device = eth_devices_find( & eth_globals.devices, device_id );
  284.     if( ! device ){
  285.         rwlock_read_unlock( & eth_globals.devices_lock );
  286.         return ENOENT;
  287.     }
  288.     dummy = device->dummy;
  289.     rwlock_read_unlock( & eth_globals.devices_lock );
  290.     rwlock_read_lock( & eth_globals.protos_lock );
  291.     do{
  292.         next = pq_detach( packet );
  293.         proto = eth_process_packet( dummy, packet );
  294.         if( proto ){
  295.             async_msg_2( proto->phone, NET_IL_RECEIVED, device_id, packet_get_id( packet ));
  296.         }else{
  297.             // drop invalid/unknown
  298.             pq_release( eth_globals.networking_phone, packet_get_id( packet ));
  299.         }
  300.         packet = next;
  301.     }while( packet );
  302.     rwlock_read_unlock( & eth_globals.protos_lock );
  303.     return EOK;
  304. }
  305.  
  306. int eth_packet_space_message( device_id_t device_id, size_t * addr_len, size_t * prefix, size_t * content, size_t * suffix ){
  307.     eth_device_ref  device;
  308.  
  309.     if( !( addr_len && prefix && content && suffix )) return EINVAL;
  310.     rwlock_read_lock( & eth_globals.devices_lock );
  311.     device = eth_devices_find( & eth_globals.devices, device_id );
  312.     if( ! device ){
  313.         rwlock_read_unlock( & eth_globals.devices_lock );
  314.         return ENOENT;
  315.     }
  316.     * content = ( ETH_MAX_CONTENT > device->mtu ) ? device->mtu : ETH_MAX_CONTENT;
  317.     rwlock_read_unlock( & eth_globals.devices_lock );
  318.     * addr_len = ETH_ADDR;
  319.     * prefix = ETH_PREFIX;
  320.     * suffix = ETH_MIN_CONTENT + ETH_SUFFIX;
  321.     return EOK;
  322. }
  323.  
  324. int eth_addr_message( device_id_t device_id, eth_addr_type_t type, measured_string_ref * address ){
  325.     eth_device_ref  device;
  326.  
  327.     if( ! address ) return EINVAL;
  328.     if( type == ETH_BROADCAST_ADDR ){
  329.         * address = eth_globals.broadcast_addr;
  330.     }else{
  331.         rwlock_read_lock( & eth_globals.devices_lock );
  332.         device = eth_devices_find( & eth_globals.devices, device_id );
  333.         if( ! device ){
  334.             rwlock_read_unlock( & eth_globals.devices_lock );
  335.             return ENOENT;
  336.         }
  337.         * address = device->addr;
  338.         rwlock_read_unlock( & eth_globals.devices_lock );
  339.     }
  340.     return ( * address ) ? EOK : ENOENT;
  341. }
  342.  
  343. int eth_register_message( services_t service, int phone ){
  344.     eth_proto_ref   proto;
  345.     int             protocol;
  346.     int             index;
  347.  
  348.     protocol = protocol_map( SERVICE_ETHERNET, service );
  349.     if( ! protocol ) return ENOENT;
  350.     rwlock_write_lock( & eth_globals.protos_lock );
  351.     proto = eth_protos_find( & eth_globals.protos, protocol );
  352.     if( proto ){
  353.         proto->phone = phone;
  354.         rwlock_write_unlock( & eth_globals.protos_lock );
  355.         return EOK;
  356.     }else{
  357.         proto = ( eth_proto_ref ) malloc( sizeof( eth_proto_t ));
  358.         if( ! proto ){
  359.             rwlock_write_unlock( & eth_globals.protos_lock );
  360.             return ENOMEM;
  361.         }
  362.         proto->service = service;
  363.         proto->protocol = protocol;
  364.         proto->phone = phone;
  365.         index = eth_protos_add( & eth_globals.protos, protocol, proto );
  366.         if( index < 0 ){
  367.             rwlock_write_unlock( & eth_globals.protos_lock );
  368.             free( proto );
  369.             return index;
  370.         }
  371.     }
  372.     printf( "\nNew protocol registered:\n\tprotocol\t= 0x%x\n\tservice\t= %d\n\tphone\t= %d", proto->protocol, proto->service, proto->phone );
  373.     rwlock_write_unlock( & eth_globals.protos_lock );
  374.     return EOK;
  375. }
  376.  
  377. int eth_prepare_packet( int dummy, packet_t packet, uint8_t * src_addr, int ethertype ){
  378.     eth_header_ex_ref   header;
  379.     eth_fcs_ref         fcs;
  380.     uint8_t *           src;
  381.     uint8_t *           dest;
  382.     int                 length;
  383.     int                 i;
  384.     void *              padding;
  385.     eth_preamble_ref    preamble;
  386.  
  387.     if( dummy ){
  388.         preamble = PACKET_PREFIX( packet, eth_preamble_t );
  389.         if( ! preamble ) return ENOMEM;
  390.         for( i = 0; i < 7; ++ i ) preamble->preamble[ i ] = ETH_PREAMBLE;
  391.         preamble->sfd = ETH_SFD;
  392.     }
  393.     header = PACKET_PREFIX( packet, eth_header_ex_t );
  394.     if( ! header ) return ENOMEM;
  395.     length = packet_get_addr( packet, & src, & dest );
  396.     if( length < 0 ) return length;
  397.     if( length < ETH_ADDR ) return EINVAL;
  398.     memcpy( header->header.src, src_addr, ETH_ADDR );
  399.     memcpy( & header->header.dest, dest, ETH_ADDR );
  400.     length = packet_get_data_length( packet );
  401.     if( length > ETH_MAX_CONTENT ) return EINVAL;
  402.     if( length < ETH_MIN_CONTENT ){
  403.         padding = packet_suffix( packet, ETH_MIN_CONTENT - length );
  404.         if( ! padding ) return ENOMEM;
  405.         bzero( padding, ETH_MIN_CONTENT - length );
  406.     }
  407.     header->header.ethertype = htons( length );
  408.     header->lsap.dsap = 0xAA;
  409.     header->lsap.ssap = header->lsap.dsap;
  410.     header->lsap.ctrl = 0;
  411.     for( i = 0; i < 3; ++ i ) header->snap.proto[ i ] = 0;
  412.     header->snap.ethertype = ethertype;
  413.     if( dummy ){
  414.         fcs = PACKET_SUFFIX( packet, eth_fcs_t );
  415.         if( ! fcs ) return ENOMEM;
  416.         * fcs = htonl( ~ compute_crc32( ~ 0, & header->header.dest, ((( void * ) fcs ) - (( void * ) & header->header.dest )) * 8 ));
  417.     }
  418.     return EOK;
  419. }
  420.  
  421. int eth_send_message( device_id_t device_id, packet_t packet, services_t sender ){
  422.     ERROR_DECLARE;
  423.  
  424.     eth_device_ref      device;
  425.     packet_t            next;
  426.     packet_t            tmp;
  427.     int                 ethertype;
  428.  
  429.     ethertype = htons( protocol_map( SERVICE_ETHERNET, sender ));
  430.     if( ! ethertype ){
  431.         pq_release( eth_globals.networking_phone, packet_get_id( packet ));
  432.         return EINVAL;
  433.     }
  434.     rwlock_read_lock( & eth_globals.devices_lock );
  435.     device = eth_devices_find( & eth_globals.devices, device_id );
  436.     if( ! device ){
  437.         rwlock_read_unlock( & eth_globals.devices_lock );
  438.         return ENOENT;
  439.     }
  440.     // process packet queue
  441.     next = packet;
  442.     do{
  443.         if( ERROR_OCCURRED( eth_prepare_packet( device->dummy, next, ( uint8_t * ) device->addr->value, ethertype ))){
  444.             // release invalid packet
  445.             tmp = pq_detach( next );
  446.             pq_release( eth_globals.networking_phone, packet_get_id( next ));
  447.             next = tmp;
  448.         }else{
  449.             next = pq_next( next );
  450.         }
  451.     }while( next );
  452.     // send packet queue
  453.     async_msg_2( device->phone, NET_NETIF_SEND, device_id, packet_get_id( packet ));
  454.     rwlock_read_unlock( & eth_globals.devices_lock );
  455.     return EOK;
  456. }
  457.  
  458. int eth_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count ){
  459.     ERROR_DECLARE;
  460.  
  461.     measured_string_ref address;
  462.     packet_t            packet;
  463.  
  464.     * answer_count = 0;
  465.     switch( IPC_GET_METHOD( * call )){
  466.         case IPC_M_PHONE_HUNGUP:
  467.             return EOK;
  468.         case NET_NIL_DEVICE:
  469.             return eth_device_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), IPC_GET_MTU( call ));
  470.         case NET_NIL_SEND:
  471.             ERROR_PROPAGATE( packet_translate( eth_globals.networking_phone, & packet, IPC_GET_PACKET( call )));
  472.             return eth_send_message( IPC_GET_DEVICE( call ), packet, IPC_GET_SERVICE( call ));
  473.         case NET_NIL_PACKET_SPACE:
  474.             ERROR_PROPAGATE( eth_packet_space_message( IPC_GET_DEVICE( call ), IPC_SET_ADDR( answer ), IPC_SET_PREFIX( answer ), IPC_SET_CONTENT( answer ), IPC_SET_SUFFIX( answer )));
  475.             * answer_count = 3;
  476.             return EOK;
  477.         case NET_NIL_ADDR:
  478.             ERROR_PROPAGATE( eth_addr_message( IPC_GET_DEVICE( call ), ETH_LOCAL_ADDR, & address ));
  479.             return measured_strings_reply( address, 1 );
  480.         case NET_NIL_BROADCAST_ADDR:
  481.             ERROR_PROPAGATE( eth_addr_message( IPC_GET_DEVICE( call ), ETH_BROADCAST_ADDR, & address ));
  482.             return measured_strings_reply( address, 1 );
  483.             return ERROR_CODE;
  484.         case IPC_M_CONNECT_TO_ME:
  485.             return eth_register_message( IPC_GET_PROTO( call ), IPC_GET_PHONE( call ));
  486.     }
  487.     return ENOTSUP;
  488. }
  489.  
  490. void eth_receiver( ipc_callid_t iid, ipc_call_t * icall ){
  491.     ERROR_DECLARE;
  492.  
  493.     packet_t        packet;
  494.     int             index;
  495.     eth_proto_ref   proto;
  496.  
  497.     while( true ){
  498.         switch( IPC_GET_METHOD( * icall )){
  499.             case NET_NIL_DEVICE_STATE:
  500.                 //TODO clear device if off?
  501.                 rwlock_read_lock( & eth_globals.protos_lock );
  502.                 for( index = eth_protos_count( & eth_globals.protos ) - 1; index >= 0; -- index ){
  503.                     proto = eth_protos_get_index( & eth_globals.protos, index );
  504.                     if( proto && proto->phone ) async_msg_2( proto->phone, NET_IL_DEVICE_STATE, IPC_GET_DEVICE( icall ), IPC_GET_STATE( icall ));
  505.                 }
  506.                 rwlock_read_unlock( & eth_globals.protos_lock );
  507.                 ipc_answer_0( iid, EOK );
  508.                 break;
  509.             case NET_NIL_RECEIVED:
  510.                 if( ! ERROR_OCCURRED( packet_translate( eth_globals.networking_phone, & packet, IPC_GET_PACKET( icall )))){
  511.                     ERROR_CODE = eth_receive_message( IPC_GET_DEVICE( icall ), packet );
  512.                 }
  513.                 ipc_answer_0( iid, ERROR_CODE );
  514.                 break;
  515.             default:
  516.                 ipc_answer_0( iid, ENOTSUP );
  517.         }
  518.         iid = async_get_call( icall );
  519.     }
  520. }
  521.  
  522. /** @}
  523.  */
  524.