Subversion Repositories HelenOS

Rev

Rev 268 | Rev 348 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2005 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. #ifndef __amd64_ASM_H__
  30. #define __amd64_ASM_H__
  31.  
  32. #include <arch/types.h>
  33. #include <config.h>
  34.  
  35.  
  36. void asm_delay_loop(__u32 t);
  37. void asm_fake_loop(__u32 t);
  38.  
  39. /** Return base address of current stack.
  40.  *
  41.  * Return the base address of the current stack.
  42.  * The stack is assumed to be STACK_SIZE bytes long.
  43.  * The stack must start on page boundary.
  44.  */
  45. static inline __address get_stack_base(void)
  46. {
  47.     __address v;
  48.    
  49.     __asm__ volatile ("andq %%rsp, %0\n" : "=r" (v) : "0" (~((__u64)STACK_SIZE-1)));
  50.    
  51.     return v;
  52. }
  53.  
  54. static inline void cpu_sleep(void) { __asm__ volatile ("hlt"); };
  55. static inline void cpu_halt(void) { __asm__ volatile ("hlt"); };
  56.  
  57.  
  58. static inline __u8 inb(__u16 port)
  59. {
  60.     __u8 out;
  61.  
  62.     __asm__ volatile (
  63.         "mov %1, %%dx;"
  64.         "inb %%dx,%%al;"
  65.         "mov %%al, %0;"
  66.         :"=m"(out)
  67.         :"m"(port)
  68.         :"%rdx","%rax"
  69.         );
  70.     return out;
  71. }
  72.  
  73. static inline __u8 outb(__u16 port,__u8 b)
  74. {
  75.     __asm__ volatile (
  76.         "mov %0,%%dx;"
  77.         "mov %1,%%al;"
  78.         "outb %%al,%%dx;"
  79.         :
  80.         :"m"( port), "m" (b)
  81.         :"%rdx","%rax"
  82.         );
  83. }
  84.  
  85. /** Set priority level low
  86.  *
  87.  * Enable interrupts and return previous
  88.  * value of EFLAGS.
  89.  */
  90. static inline pri_t cpu_priority_low(void) {
  91.     pri_t v;
  92.     __asm__ volatile (
  93.         "pushfq\n"
  94.         "popq %0\n"
  95.         "sti\n"
  96.         : "=r" (v)
  97.     );
  98.     return v;
  99. }
  100.  
  101. /** Set priority level high
  102.  *
  103.  * Disable interrupts and return previous
  104.  * value of EFLAGS.
  105.  */
  106. static inline pri_t cpu_priority_high(void) {
  107.     pri_t v;
  108.     __asm__ volatile (
  109.         "pushfq\n"
  110.         "popq %0\n"
  111.         "cli\n"
  112.         : "=r" (v)
  113.         );
  114.     return v;
  115. }
  116.  
  117. /** Restore priority level
  118.  *
  119.  * Restore EFLAGS.
  120.  */
  121. static inline void cpu_priority_restore(pri_t pri) {
  122.     __asm__ volatile (
  123.         "pushq %0\n"
  124.         "popfq\n"
  125.         : : "r" (pri)
  126.         );
  127. }
  128.  
  129. /** Return raw priority level
  130.  *
  131.  * Return EFLAFS.
  132.  */
  133. static inline pri_t cpu_priority_read(void) {
  134.     pri_t v;
  135.     __asm__ volatile (
  136.         "pushfq\n"
  137.         "popq %0\n"
  138.         : "=r" (v)
  139.     );
  140.     return v;
  141. }
  142.  
  143. /** Read CR0
  144.  *
  145.  * Return value in CR0
  146.  *
  147.  * @return Value read.
  148.  */
  149. static inline __u64 read_cr0(void)
  150. {
  151.     __u64 v;
  152.     __asm__ volatile ("movq %%cr0,%0" : "=r" (v));
  153.     return v;
  154. }
  155.  
  156. /** Read CR2
  157.  *
  158.  * Return value in CR2
  159.  *
  160.  * @return Value read.
  161.  */
  162. static inline __u64 read_cr2(void)
  163. {
  164.     __u64 v;
  165.     __asm__ volatile ("movq %%cr2,%0" : "=r" (v));
  166.     return v;
  167. }
  168.  
  169. /** Write CR3
  170.  *
  171.  * Write value to CR3.
  172.  *
  173.  * @param v Value to be written.
  174.  */
  175. static inline void write_cr3(__u64 v)
  176. {
  177.     __asm__ volatile ("movq %0,%%cr3\n" : : "r" (v));
  178. }
  179.  
  180. /** Read CR3
  181.  *
  182.  * Return value in CR3
  183.  *
  184.  * @return Value read.
  185.  */
  186. static inline __u64 read_cr3(void)
  187. {
  188.     __u64 v;
  189.     __asm__ volatile ("movq %%cr3,%0" : "=r" (v));
  190.     return v;
  191. }
  192.  
  193.  
  194. /** Enable local APIC
  195.  *
  196.  * Enable local APIC in MSR.
  197.  */
  198. static inline void enable_l_apic_in_msr()
  199. {
  200.     __asm__ volatile (
  201.         "movl $0x1b, %%ecx;"
  202.         "rdmsr;"
  203.         "orl $(1<<11),%%eax;"
  204.         "orl $(0xfee00000),%%eax;"
  205.         "wrmsr;"
  206.         :
  207.         :
  208.         :"%eax","%ecx","%edx"
  209.         );
  210. }
  211.  
  212. extern size_t interrupt_handler_size;
  213. extern void interrupt_handlers(void);
  214.  
  215. #endif
  216.