/*
* Copyright (c) 2001-2004 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup main
* @{
*/
/**
* @file
* @brief Main initialization kernel function for all processors.
*
* During kernel boot, all processors, after architecture dependent
* initialization, start executing code found in this file. After
* bringing up all subsystems, control is passed to scheduler().
*
* The bootstrap processor starts executing main_bsp() while
* the application processors start executing main_ap().
*
* @see scheduler()
* @see main_bsp()
* @see main_ap()
*/
#include <arch/asm.h>
#include <context.h>
#include <print.h>
#include <panic.h>
#include <debug.h>
#include <config.h>
#include <time/clock.h>
#include <time/timeout.h>
#include <proc/scheduler.h>
#include <proc/thread.h>
#include <proc/task.h>
#include <proc/tasklet.h>
#include <main/kinit.h>
#include <main/version.h>
#include <console/kconsole.h>
#include <console/console.h>
#include <cpu.h>
#include <align.h>
#include <interrupt.h>
#include <mm/frame.h>
#include <mm/page.h>
#include <genarch/mm/page_pt.h>
#include <mm/tlb.h>
#include <mm/as.h>
#include <mm/slab.h>
#include <synch/waitq.h>
#include <synch/futex.h>
#include <arch/arch.h>
#include <arch.h>
#include <arch/faddr.h>
#include <ipc/ipc.h>
#include <macros.h>
#include <adt/btree.h>
#include <smp/smp.h>
#include <ddi/ddi.h>
#include <main/main.h>
#include <ipc/event.h>
/** Global configuration structure. */
config_t config;
/** Initial user-space tasks */
init_t init = {
.cnt = 0
};
/** Boot allocations. */
ballocs_t ballocs = {
.base = NULL,
.size = 0
};
context_t ctx;
/*
* These 'hardcoded' variables will be intialized by
* the linker or the low level assembler code with
* appropriate sizes and addresses.
*/
/** Virtual address of where the kernel is loaded. */
uintptr_t hardcoded_load_address = 0;
/** Size of the kernel code in bytes. */
size_t hardcoded_ktext_size = 0;
/** Size of the kernel data in bytes. */
size_t hardcoded_kdata_size = 0;
/** Lowest safe stack virtual address. */
uintptr_t stack_safe = 0;
/*
* These two functions prevent stack from underflowing during the
* kernel boot phase when SP is set to the very top of the reserved
* space. The stack could get corrupted by a fooled compiler-generated
* pop sequence otherwise.
*/
static void main_bsp_separated_stack(void);
#ifdef CONFIG_SMP
static void main_ap_separated_stack(void);
#endif
#define CONFIG_STACK_SIZE ((1 << STACK_FRAMES) * STACK_SIZE)
/** Main kernel routine for bootstrap CPU.
*
* The code here still runs on the boot stack, which knows nothing about
* preemption counts. Because of that, this function cannot directly call
* functions that disable or enable preemption (e.g. spinlock_lock()). The
* primary task of this function is to calculate address of a new stack and
* switch to it.
*
* Assuming interrupts_disable().
*
*/
void main_bsp(void)
{
config.cpu_count = 1;
config.cpu_active = 1;
config.base = hardcoded_load_address;
config.kernel_size = ALIGN_UP(hardcoded_ktext_size +
hardcoded_kdata_size, PAGE_SIZE);
config.stack_size = CONFIG_STACK_SIZE;
/* Initialy the stack is placed just after the kernel */
config.stack_base = config.base + config.kernel_size;
/* Avoid placing stack on top of init */
count_t i;
for (i = 0; i < init.cnt; i++) {
if (PA_overlaps(config.stack_base, config.stack_size,
init.tasks[i].addr, init.tasks[i].size))
config.stack_base = ALIGN_UP(init.tasks[i].addr +
init.tasks[i].size, config.stack_size);
}
/* Avoid placing stack on top of boot allocations. */
if (ballocs.size) {
if (PA_overlaps(config.stack_base, config.stack_size,
ballocs.base, ballocs.size))
config.stack_base = ALIGN_UP(ballocs.base +
ballocs.size, PAGE_SIZE);
}
if (config.stack_base < stack_safe)
config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);
context_save(&ctx);
context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,
THREAD_STACK_SIZE);
context_restore(&ctx);
/* not reached */
}
/** Main kernel routine for bootstrap CPU using new stack.
*
* Second part of main_bsp().
*
*/
void main_bsp_separated_stack(void)
{
/* Keep this the first thing. */
the_initialize(THE);
version_print();
LOG("\nconfig.base=%#" PRIp " config.kernel_size=%" PRIs
"\nconfig.stack_base=%#" PRIp " config.stack_size=%" PRIs,
config.base, config.kernel_size, config.stack_base,
config.stack_size);
#ifdef CONFIG_KCONSOLE
/*
* kconsole data structures must be initialized very early
* because other subsystems will register their respective
* commands.
*/
LOG_EXEC(kconsole_init());
#endif
/*
* Exception handler initialization, before architecture
* starts adding its own handlers
*/
LOG_EXEC(exc_init());
/*
* Memory management subsystems initialization.
*/
LOG_EXEC(arch_pre_mm_init());
LOG_EXEC(frame_init());
/* Initialize at least 1 memory segment big enough for slab to work. */
LOG_EXEC(slab_cache_init());
LOG_EXEC(btree_init());
LOG_EXEC(as_init());
LOG_EXEC(page_init());
LOG_EXEC(tlb_init());
LOG_EXEC(ddi_init());
LOG_EXEC(tasklet_init());
LOG_EXEC(arch_post_mm_init());
LOG_EXEC(arch_pre_smp_init());
LOG_EXEC(smp_init());
/* Slab must be initialized after we know the number of processors. */
LOG_EXEC(slab_enable_cpucache());
printf("Detected %" PRIc
" CPU(s), %" PRIu64
" MiB free memory\n", config.cpu_count, SIZE2MB(zone_total_size()));
LOG_EXEC(cpu_init());
LOG_EXEC(calibrate_delay_loop());
LOG_EXEC(clock_counter_init());
LOG_EXEC(timeout_init());
LOG_EXEC(scheduler_init());
LOG_EXEC(task_init());
LOG_EXEC(thread_init());
LOG_EXEC(futex_init());
if (init.cnt > 0) {
count_t i;
for (i = 0; i < init.cnt; i++)
LOG("init[%" PRIc "].addr=%#" PRIp ", init[%" PRIc
"].size=%#" PRIs "\n", i, init.tasks[i].addr, i,
init.tasks[i].size);
} else
printf("No init binaries found\n");
LOG_EXEC(ipc_init());
LOG_EXEC(event_init());
LOG_EXEC(klog_init());
/*
* Create kernel task.
*/
task_t *kernel = task_create(AS_KERNEL, "kernel");
if (!kernel)
panic("Cannot create kernel task.");
/*
* Create the first thread.
*/
thread_t *kinit_thread
= thread_create(kinit, NULL, kernel, 0, "kinit", true);
if (!kinit_thread)
panic("Cannot create kinit thread.");
LOG_EXEC(thread_ready(kinit_thread));
/*
* This call to scheduler() will return to kinit,
* starting the thread of kernel threads.
*/
scheduler();
/* not reached */
}
#ifdef CONFIG_SMP
/** Main kernel routine for application CPUs.
*
* Executed by application processors, temporary stack
* is at ctx.sp which was set during BSP boot.
* This function passes control directly to
* main_ap_separated_stack().
*
* Assuming interrupts_disable()'d.
*
*/
void main_ap(void)
{
/*
* Incrementing the active CPU counter will guarantee that the
* *_init() functions can find out that they need to
* do initialization for AP only.
*/
config.cpu_active++;
/*
* The THE structure is well defined because ctx.sp is used as stack.
*/
the_initialize(THE);
arch_pre_mm_init();
frame_init();
page_init();
tlb_init();
arch_post_mm_init();
cpu_init();
calibrate_delay_loop();
arch_post_cpu_init();
the_copy(THE, (the_t *) CPU->stack);
/*
* If we woke kmp up before we left the kernel stack, we could
* collide with another CPU coming up. To prevent this, we
* switch to this cpu's private stack prior to waking kmp up.
*/
context_save(&CPU->saved_context);
context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),
(uintptr_t) CPU->stack, CPU_STACK_SIZE);
context_restore(&CPU->saved_context);
/* not reached */
}
/** Main kernel routine for application CPUs using new stack.
*
* Second part of main_ap().
*
*/
void main_ap_separated_stack(void)
{
/*
* Configure timeouts for this cpu.
*/
timeout_init();
waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
scheduler();
/* not reached */
}
#endif /* CONFIG_SMP */
/** @}
*/