Rev 3022 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed
#
# Copyright (c) 2005 Jakub Jermar
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# - Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# - The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#include <arch/register.h>
#include <arch/mm/page.h>
#include <arch/mm/asid.h>
#include <mm/asid.h>
#define RR_MASK (0xFFFFFFFF00000002)
#define RID_SHIFT 8
#define PS_SHIFT 2
#define KERNEL_TRANSLATION_I 0x0010000000000661
#define KERNEL_TRANSLATION_D 0x0010000000000661
#define KERNEL_TRANSLATION_VIO 0x0010000000000671
#define KERNEL_TRANSLATION_IO 0x00100FFFFC000671
#define KERNEL_TRANSLATION_FW 0x00100000F0000671
.section K_TEXT_START, "ax"
.global kernel_image_start
stack0:
kernel_image_start:
.auto
#ifdef CONFIG_SMP
# Identify self(CPU) in OS structures by ID / EID
mov r9 = cr64
mov r10 = 1
movl r12 = 0xffffffff
movl r8 = cpu_by_id_eid_list
and r8 = r8, r12
shr r9 = r9, 16
add r8 = r8, r9
st1 [r8] = r10
#endif
mov psr.l = r0
srlz.i
srlz.d
# Fill TR.i and TR.d using Region Register #VRN_KERNEL
movl r8 = (VRN_KERNEL << VRN_SHIFT)
mov r9 = rr[r8]
movl r10 = (RR_MASK)
and r9 = r10, r9
movl r10 = ((RID_KERNEL << RID_SHIFT) | (KERNEL_PAGE_WIDTH << PS_SHIFT))
or r9 = r10, r9
mov rr[r8] = r9
movl r8 = (VRN_KERNEL << VRN_SHIFT)
mov cr.ifa = r8
mov r11 = cr.itir
movl r10 = (KERNEL_PAGE_WIDTH << PS_SHIFT)
or r10 = r10, r11
mov cr.itir = r10
movl r10 = (KERNEL_TRANSLATION_I)
itr.i itr[r0] = r10
movl r10 = (KERNEL_TRANSLATION_D)
itr.d dtr[r0] = r10
movl r7 = 1
movl r8 = (VRN_KERNEL << VRN_SHIFT) | VIO_OFFSET
mov cr.ifa = r8
movl r10 = (KERNEL_TRANSLATION_VIO)
itr.d dtr[r7] = r10
mov r11 = cr.itir
movl r10 = ~0xfc
and r10 = r10, r11
movl r11 = (IO_PAGE_WIDTH << PS_SHIFT)
or r10 = r10, r11
mov cr.itir = r10
movl r7 = 2
movl r8 = (VRN_KERNEL << VRN_SHIFT) | IO_OFFSET
mov cr.ifa = r8
movl r10 = (KERNEL_TRANSLATION_IO)
itr.d dtr[r7] = r10
# Setup mapping for fimware arrea (also SAPIC)
mov r11 = cr.itir
movl r10 = ~0xfc
and r10 = r10, r11
movl r11 = (FW_PAGE_WIDTH << PS_SHIFT)
or r10 = r10, r11
mov cr.itir = r10
movl r7 = 3
movl r8 = (VRN_KERNEL << VRN_SHIFT) | FW_OFFSET
mov cr.ifa = r8
movl r10 = (KERNEL_TRANSLATION_FW)
itr.d dtr[r7] = r10
# Initialize PSR
movl r10 = (PSR_DT_MASK | PSR_RT_MASK | PSR_IT_MASK | PSR_IC_MASK) /* Enable paging */
mov r9 = psr
or r10 = r10, r9
mov cr.ipsr = r10
mov cr.ifs = r0
movl r8 = paging_start
mov cr.iip = r8
srlz.d
srlz.i
.explicit
/*
* Return From Interrupt is the only way to
* fill the upper half word of PSR.
*/
rfi ;;
.global paging_start
paging_start:
/*
* Now we are paging.
*/
# Switch to register bank 1
bsw.1
#ifdef CONFIG_SMP
# Am I BSP or AP?
movl r20 = bsp_started ;;
ld8 r20 = [r20] ;;
cmp.eq p3, p2 = r20, r0 ;;
#else
cmp.eq p3, p2 = r0, r0 ;; /* you are BSP */
#endif /* CONFIG_SMP */
# Initialize register stack
mov ar.rsc = r0
movl r8 = (VRN_KERNEL << VRN_SHIFT) ;;
mov ar.bspstore = r8
loadrs
# Initialize memory stack to some sane value
movl r12 = stack0 ;;
add r12 = -16, r12 /* allocate a scratch area on the stack */
# Initialize gp (Global Pointer) register
movl r20 = (VRN_KERNEL << VRN_SHIFT);;
or r20 = r20,r1;;
movl r1 = _hardcoded_load_address
/*
* Initialize hardcoded_* variables. Do only BSP
*/
(p3) movl r14 = _hardcoded_ktext_size
(p3) movl r15 = _hardcoded_kdata_size
(p3) movl r16 = _hardcoded_load_address ;;
(p3) addl r17 = @gprel(hardcoded_ktext_size), gp
(p3) addl r18 = @gprel(hardcoded_kdata_size), gp
(p3) addl r19 = @gprel(hardcoded_load_address), gp
(p3) addl r21 = @gprel(bootinfo), gp
;;
(p3) st8 [r17] = r14
(p3) st8 [r18] = r15
(p3) st8 [r19] = r16
(p3) st8 [r21] = r20
ssm (1 << 19) ;; /* Disable f32 - f127 */
srlz.i
srlz.d ;;
#ifdef CONFIG_SMP
(p2) movl r18 = main_ap ;;
(p2) mov b1 = r18 ;;
(p2) br.call.sptk.many b0 = b1
# Mark that BSP is on
mov r20 = 1 ;;
movl r21 = bsp_started ;;
st8 [r21] = r20 ;;
#endif
br.call.sptk.many b0 = arch_pre_main
movl r18 = main_bsp ;;
mov b1 = r18 ;;
br.call.sptk.many b0 = b1
0:
br 0b
#ifdef CONFIG_SMP
.align 4096
kernel_image_ap_start:
.auto
# Identify self(CPU) in OS structures by ID / EID
mov r9 = cr64
mov r10 = 1
movl r12 = 0xffffffff
movl r8 = cpu_by_id_eid_list
and r8 = r8, r12
shr r9 = r9, 16
add r8 = r8, r9
st1 [r8] = r10
# Wait for wakeup synchro signal (#3 in cpu_by_id_eid_list)
kernel_image_ap_start_loop:
movl r11 = kernel_image_ap_start_loop
and r11 = r11, r12
mov b1 = r11
ld1 r20 = [r8] ;;
movl r21 = 3 ;;
cmp.eq p2, p3 = r20, r21 ;;
(p3) br.call.sptk.many b0 = b1
movl r11 = kernel_image_start
and r11 = r11, r12
mov b1 = r11
br.call.sptk.many b0 = b1
.align 16
.global bsp_started
bsp_started:
.space 8
.align 4096
.global cpu_by_id_eid_list
cpu_by_id_eid_list:
.space 65536
#endif /* CONFIG_SMP */