Subversion Repositories HelenOS

Rev

Rev 2767 | Rev 4055 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2006 Ondrej Palkovsky
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup amd64debug
  30.  * @{
  31.  */
  32. /** @file
  33.  */
  34.  
  35. #include <arch/debugger.h>
  36. #include <console/kconsole.h>
  37. #include <console/cmd.h>
  38. #include <symtab.h>
  39. #include <print.h>
  40. #include <panic.h>
  41. #include <interrupt.h>
  42. #include <arch/asm.h>
  43. #include <arch/cpu.h>
  44. #include <debug.h>
  45. #include <func.h>
  46. #include <smp/ipi.h>
  47.  
  48. typedef struct  {
  49.     uintptr_t address;      /**< Breakpoint address */
  50.     int flags;              /**< Flags regarding breakpoint */
  51.     int counter;            /**< How many times the exception occured */
  52. } bpinfo_t;
  53.  
  54. static bpinfo_t breakpoints[BKPOINTS_MAX];
  55. SPINLOCK_INITIALIZE(bkpoint_lock);
  56.  
  57. static int cmd_print_breakpoints(cmd_arg_t *argv);
  58. static cmd_info_t bkpts_info = {
  59.     .name = "bkpts",
  60.     .description = "Print breakpoint table.",
  61.     .func = cmd_print_breakpoints,
  62.     .argc = 0,
  63. };
  64.  
  65. #ifndef CONFIG_DEBUG_AS_WATCHPOINT
  66.  
  67. static int cmd_del_breakpoint(cmd_arg_t *argv);
  68. static cmd_arg_t del_argv = {
  69.     .type = ARG_TYPE_INT
  70. };
  71. static cmd_info_t delbkpt_info = {
  72.     .name = "delbkpt",
  73.     .description = "delbkpt <number> - Delete breakpoint.",
  74.     .func = cmd_del_breakpoint,
  75.     .argc = 1,
  76.     .argv = &del_argv
  77. };
  78.  
  79. static int cmd_add_breakpoint(cmd_arg_t *argv);
  80. static cmd_arg_t add_argv = {
  81.     .type = ARG_TYPE_INT
  82. };
  83. static cmd_info_t addbkpt_info = {
  84.     .name = "addbkpt",
  85.     .description = "addbkpt <&symbol> - new breakpoint.",
  86.     .func = cmd_add_breakpoint,
  87.     .argc = 1,
  88.     .argv = &add_argv
  89. };
  90.  
  91. static cmd_arg_t addw_argv = {
  92.     .type = ARG_TYPE_INT
  93. };
  94. static cmd_info_t addwatchp_info = {
  95.     .name = "addwatchp",
  96.     .description = "addbwatchp <&symbol> - new write watchpoint.",
  97.     .func = cmd_add_breakpoint,
  98.     .argc = 1,
  99.     .argv = &addw_argv
  100. };
  101.  
  102. #endif
  103.  
  104. /** Print table of active breakpoints */
  105. int cmd_print_breakpoints(cmd_arg_t *argv __attribute__((unused)))
  106. {
  107.     unsigned int i;
  108.     char *symbol;
  109.    
  110.     if (sizeof(void *) == 4) {
  111.         printf("#  Count Address    In symbol\n");
  112.         printf("-- ----- ---------- ---------\n");
  113.     } else {
  114.         printf("#  Count Address            In symbol\n");
  115.         printf("-- ----- ------------------ ---------\n");
  116.     }
  117.    
  118.     for (i = 0; i < BKPOINTS_MAX; i++)
  119.         if (breakpoints[i].address) {
  120.             symbol = get_symtab_entry(breakpoints[i].address);
  121.            
  122.             if (sizeof(void *) == 4)
  123.                 printf("%-2u %-5d %#10zx %s\n", i, breakpoints[i].counter,
  124.                     breakpoints[i].address, symbol);
  125.             else
  126.                 printf("%-2u %-5d %#18zx %s\n", i, breakpoints[i].counter,
  127.                     breakpoints[i].address, symbol);
  128.         }
  129.     return 1;
  130. }
  131.  
  132. /* Setup DR register according to table */
  133. static void setup_dr(int curidx)
  134. {
  135.     unative_t dr7;
  136.     bpinfo_t *cur = &breakpoints[curidx];
  137.     int flags = breakpoints[curidx].flags;
  138.  
  139.     /* Disable breakpoint in DR7 */
  140.     dr7 = read_dr7();
  141.     dr7 &= ~(0x2 << (curidx*2));
  142.  
  143.     if (cur->address) { /* Setup DR register */
  144.         /* Set breakpoint to debug registers */
  145.         switch (curidx) {
  146.         case 0:
  147.             write_dr0(cur->address);
  148.             break;
  149.         case 1:
  150.             write_dr1(cur->address);
  151.             break;
  152.         case 2:
  153.             write_dr2(cur->address);
  154.             break;
  155.         case 3:
  156.             write_dr3(cur->address);
  157.             break;
  158.         }
  159.         /* Set type to requested breakpoint & length*/
  160.         dr7 &= ~ (0x3 << (16 + 4*curidx));
  161.         dr7 &= ~ (0x3 << (18 + 4*curidx));
  162.         if ((flags & BKPOINT_INSTR)) {
  163.             ;
  164.         } else {
  165.             if (sizeof(int) == 4)
  166.                 dr7 |= ((unative_t) 0x3) << (18 + 4*curidx);
  167.             else /* 8 */
  168.                 dr7 |= ((unative_t) 0x2) << (18 + 4*curidx);
  169.            
  170.             if ((flags & BKPOINT_WRITE))
  171.                 dr7 |= ((unative_t) 0x1) << (16 + 4*curidx);
  172.             else if ((flags & BKPOINT_READ_WRITE))
  173.                 dr7 |= ((unative_t) 0x3) << (16 + 4*curidx);
  174.         }
  175.  
  176.         /* Enable global breakpoint */
  177.         dr7 |= 0x2 << (curidx*2);
  178.  
  179.         write_dr7(dr7);
  180.        
  181.     }
  182. }
  183.    
  184. /** Enable hardware breakpoint
  185.  *
  186.  * @param where Address of HW breakpoint
  187.  * @param flags Type of breakpoint (EXECUTE, WRITE)
  188.  * @return Debug slot on success, -1 - no available HW breakpoint
  189.  */
  190. int breakpoint_add(const void *where, const int flags, int curidx)
  191. {
  192.     ipl_t ipl;
  193.     int i;
  194.     bpinfo_t *cur;
  195.  
  196.     ASSERT(flags & (BKPOINT_INSTR | BKPOINT_WRITE | BKPOINT_READ_WRITE));
  197.  
  198.     ipl = interrupts_disable();
  199.     spinlock_lock(&bkpoint_lock);
  200.    
  201.     if (curidx == -1) {
  202.         /* Find free space in slots */
  203.         for (i = 0; i < BKPOINTS_MAX; i++)
  204.             if (!breakpoints[i].address) {
  205.                 curidx = i;
  206.                 break;
  207.             }
  208.         if (curidx == -1) {
  209.             /* Too many breakpoints */
  210.             spinlock_unlock(&bkpoint_lock);
  211.             interrupts_restore(ipl);
  212.             return -1;
  213.         }
  214.     }
  215.     cur = &breakpoints[curidx];
  216.  
  217.     cur->address = (uintptr_t) where;
  218.     cur->flags = flags;
  219.     cur->counter = 0;
  220.  
  221.     setup_dr(curidx);
  222.  
  223.     spinlock_unlock(&bkpoint_lock);
  224.     interrupts_restore(ipl);
  225.  
  226.     /* Send IPI */
  227. #ifdef CONFIG_SMP
  228. //  ipi_broadcast(VECTOR_DEBUG_IPI);   
  229. #endif 
  230.  
  231.     return curidx;
  232. }
  233.  
  234. #ifdef amd64
  235. #   define getip(x) ((x)->rip)
  236. #else
  237. #   define getip(x) ((x)->eip)
  238. #endif
  239.  
  240. static void handle_exception(int slot, istate_t *istate)
  241. {
  242.     ASSERT(breakpoints[slot].address);
  243.  
  244.     /* Handle zero checker */
  245.     if (! (breakpoints[slot].flags & BKPOINT_INSTR)) {
  246.         if ((breakpoints[slot].flags & BKPOINT_CHECK_ZERO)) {
  247.             if (*((unative_t *) breakpoints[slot].address) != 0)
  248.                 return;
  249.             printf("**** Found ZERO on address %lx (slot %d) ****\n",
  250.                 breakpoints[slot].address, slot);
  251.         } else {
  252.             printf("Data watchpoint - new data: %lx\n",
  253.                    *((unative_t *) breakpoints[slot].address));
  254.         }
  255.     }
  256.     printf("Reached breakpoint %d:%lx(%s)\n", slot, getip(istate),
  257.            get_symtab_entry(getip(istate)));
  258.     printf("***Type 'exit' to exit kconsole.\n");
  259.     atomic_set(&haltstate,1);
  260.     kconsole((void *) "debug");
  261.     atomic_set(&haltstate,0);
  262. }
  263.  
  264. void breakpoint_del(int slot)
  265. {
  266.     bpinfo_t *cur;
  267.     ipl_t ipl;
  268.  
  269.     ipl = interrupts_disable();
  270.     spinlock_lock(&bkpoint_lock);
  271.  
  272.     cur = &breakpoints[slot];
  273.     if (!cur->address) {
  274.         spinlock_unlock(&bkpoint_lock);
  275.         interrupts_restore(ipl);
  276.         return;
  277.     }
  278.  
  279.     cur->address = NULL;
  280.  
  281.     setup_dr(slot);
  282.  
  283.     spinlock_unlock(&bkpoint_lock);
  284.     interrupts_restore(ipl);
  285. #ifdef CONFIG_SMP
  286. //  ipi_broadcast(VECTOR_DEBUG_IPI);   
  287. #endif
  288. }
  289.  
  290. #ifndef CONFIG_DEBUG_AS_WATCHPOINT
  291.  
  292. /** Remove breakpoint from table */
  293. int cmd_del_breakpoint(cmd_arg_t *argv)
  294. {
  295.     unative_t bpno = argv->intval;
  296.     if (bpno > BKPOINTS_MAX) {
  297.         printf("Invalid breakpoint number.\n");
  298.         return 0;
  299.     }
  300.     breakpoint_del(argv->intval);
  301.     return 1;
  302. }
  303.  
  304. /** Add new breakpoint to table */
  305. static int cmd_add_breakpoint(cmd_arg_t *argv)
  306. {
  307.     int flags;
  308.     int id;
  309.  
  310.     if (argv == &add_argv) {
  311.         flags = BKPOINT_INSTR;
  312.     } else { /* addwatchp */
  313.         flags = BKPOINT_WRITE;
  314.     }
  315.     printf("Adding breakpoint on address: %p\n", argv->intval);
  316.     id = breakpoint_add((void *)argv->intval, flags, -1);
  317.     if (id < 0)
  318.         printf("Add breakpoint failed.\n");
  319.     else
  320.         printf("Added breakpoint %d.\n", id);
  321.    
  322.     return 1;
  323. }
  324. #endif
  325.  
  326. static void debug_exception(int n __attribute__((unused)), istate_t *istate)
  327. {
  328.     unative_t dr6;
  329.     int i;
  330.    
  331.     /* Set RF to restart the instruction  */
  332. #ifdef amd64      
  333.     istate->rflags |= RFLAGS_RF;
  334. #else
  335.     istate->eflags |= EFLAGS_RF;
  336. #endif
  337.  
  338.     dr6 = read_dr6();
  339.     for (i=0; i < BKPOINTS_MAX; i++) {
  340.         if (dr6 & (1 << i)) {
  341.             dr6 &= ~ (1 << i);
  342.             write_dr6(dr6);
  343.            
  344.             handle_exception(i, istate);
  345.         }
  346.     }
  347. }
  348.  
  349. #ifdef CONFIG_SMP
  350. static void debug_ipi(int n __attribute__((unused)), istate_t *istate __attribute__((unused)))
  351. {
  352.     int i;
  353.  
  354.     spinlock_lock(&bkpoint_lock);
  355.     for (i = 0; i < BKPOINTS_MAX; i++)
  356.         setup_dr(i);
  357.     spinlock_unlock(&bkpoint_lock);
  358. }
  359. #endif
  360.  
  361. /** Initialize debugger */
  362. void debugger_init()
  363. {
  364.     int i;
  365.  
  366.     for (i=0; i<BKPOINTS_MAX; i++)
  367.         breakpoints[i].address = NULL;
  368.    
  369.     cmd_initialize(&bkpts_info);
  370.     if (!cmd_register(&bkpts_info))
  371.         panic("could not register command %s\n", bkpts_info.name);
  372.  
  373. #ifndef CONFIG_DEBUG_AS_WATCHPOINT
  374.     cmd_initialize(&delbkpt_info);
  375.     if (!cmd_register(&delbkpt_info))
  376.         panic("could not register command %s\n", delbkpt_info.name);
  377.  
  378.     cmd_initialize(&addbkpt_info);
  379.     if (!cmd_register(&addbkpt_info))
  380.         panic("could not register command %s\n", addbkpt_info.name);
  381.  
  382.     cmd_initialize(&addwatchp_info);
  383.     if (!cmd_register(&addwatchp_info))
  384.         panic("could not register command %s\n", addwatchp_info.name);
  385. #endif
  386.    
  387.     exc_register(VECTOR_DEBUG, "debugger",
  388.              debug_exception);
  389. #ifdef CONFIG_SMP
  390.     exc_register(VECTOR_DEBUG_IPI, "debugger_smp",
  391.              debug_ipi);
  392. #endif
  393. }
  394.  
  395. /** @}
  396.  */
  397.