/*
* Copyright (c) 2001-2004 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup genarch
* @{
*/
/**
* @file
* @brief i8042 processor driver.
*
* It takes care of low-level keyboard functions.
*/
#include <genarch/kbd/i8042.h>
#include <genarch/kbd/key.h>
#include <genarch/kbd/scanc.h>
#include <genarch/kbd/scanc_pc.h>
#include <arch/drivers/i8042.h>
#include <cpu.h>
#include <arch/asm.h>
#include <arch.h>
#include <console/chardev.h>
#include <console/console.h>
#include <interrupt.h>
#include <sysinfo/sysinfo.h>
#include <ipc/irq.h>
/* Keyboard commands. */
#define KBD_ENABLE 0xf4
#define KBD_DISABLE 0xf5
#define KBD_ACK 0xfa
/*
* 60 Write 8042 Command Byte: next data byte written to port 60h is
* placed in 8042 command register. Format:
*
* |7|6|5|4|3|2|1|0|8042 Command Byte
* | | | | | | | `---- 1=enable output register full interrupt
* | | | | | | `----- should be 0
* | | | | | `------ 1=set status register system, 0=clear
* | | | | `------- 1=override keyboard inhibit, 0=allow inhibit
* | | | `-------- disable keyboard I/O by driving clock line low
* | | `--------- disable auxiliary device, drives clock line low
* | `---------- IBM scancode translation 0=AT, 1=PC/XT
* `----------- reserved, should be 0
*/
#define i8042_SET_COMMAND 0x60
#define i8042_COMMAND 0x69
#define i8042_BUFFER_FULL_MASK 0x01
#define i8042_WAIT_MASK 0x02
#define i8042_MOUSE_DATA 0x20
static void i8042_suspend(chardev_t *);
static void i8042_resume(chardev_t *);
static chardev_operations_t ops = {
.suspend = i8042_suspend,
.resume = i8042_resume,
.read = i8042_key_read
};
/** Structure for i8042's IRQ. */
static irq_t i8042_kbd_irq;
static irq_t i8042_mouse_irq;
void i8042_grab(void)
{
ipl_t ipl = interrupts_disable();
spinlock_lock(&i8042_kbd_irq.lock);
i8042_kbd_irq.notif_cfg.notify = false;
spinlock_unlock(&i8042_kbd_irq.lock);
spinlock_lock(&i8042_mouse_irq.lock);
i8042_mouse_irq.notif_cfg.notify = false;
spinlock_unlock(&i8042_mouse_irq.lock);
interrupts_restore(ipl);
}
void i8042_release(void)
{
ipl_t ipl = interrupts_disable();
spinlock_lock(&i8042_kbd_irq.lock);
if (i8042_kbd_irq.notif_cfg.answerbox)
i8042_kbd_irq.notif_cfg.notify = true;
spinlock_unlock(&i8042_kbd_irq.lock);
spinlock_lock(&i8042_mouse_irq.lock);
if (i8042_mouse_irq.notif_cfg.answerbox)
i8042_mouse_irq.notif_cfg.notify = true;
spinlock_unlock(&i8042_mouse_irq.lock);
interrupts_restore(ipl);
}
static irq_ownership_t i8042_claim(void)
{
return IRQ_ACCEPT;
}
static void i8042_irq_handler(irq_t *irq, void *arg, ...)
{
if (irq->notif_cfg.notify && irq->notif_cfg.answerbox)
ipc_irq_send_notif(irq);
else {
uint8_t data;
uint8_t status;
while (((status = i8042_status_read()) & i8042_BUFFER_FULL_MASK)) {
data = i8042_data_read();
if ((status & i8042_MOUSE_DATA))
continue;
if (data & KEY_RELEASE)
key_released(data ^ KEY_RELEASE);
else
key_pressed(data);
}
}
}
/** Initialize i8042. */
void i8042_init(devno_t kbd_devno, inr_t kbd_inr, devno_t mouse_devno, inr_t mouse_inr)
{
chardev_initialize("i8042_kbd", &kbrd, &ops);
stdin = &kbrd;
irq_initialize(&i8042_kbd_irq);
i8042_kbd_irq.devno = kbd_devno;
i8042_kbd_irq.inr = kbd_inr;
i8042_kbd_irq.claim = i8042_claim;
i8042_kbd_irq.handler = i8042_irq_handler;
irq_register(&i8042_kbd_irq);
irq_initialize(&i8042_mouse_irq);
i8042_mouse_irq.devno = mouse_devno;
i8042_mouse_irq.inr = mouse_inr;
i8042_mouse_irq.claim = i8042_claim;
i8042_mouse_irq.handler = i8042_irq_handler;
irq_register(&i8042_mouse_irq);
#ifndef ia64
trap_virtual_enable_irqs(1 << kbd_inr);
trap_virtual_enable_irqs(1 << mouse_inr);
#endif
/*
* Clear input buffer.
* Number of iterations is limited to prevent infinite looping.
*/
int i;
for (i = 0; (i8042_status_read() & i8042_BUFFER_FULL_MASK) && i < 100; i++) {
i8042_data_read();
}
sysinfo_set_item_val("kbd", NULL, true);
sysinfo_set_item_val("kbd.devno", NULL, kbd_devno);
sysinfo_set_item_val("kbd.inr", NULL, kbd_inr);
sysinfo_set_item_val("mouse", NULL, true);
sysinfo_set_item_val("mouse.devno", NULL, mouse_devno);
sysinfo_set_item_val("mouse.inr", NULL, mouse_inr);
i8042_grab();
}
/* Called from getc(). */
void i8042_resume(chardev_t *d)
{
}
/* Called from getc(). */
void i8042_suspend(chardev_t *d)
{
}
char i8042_key_read(chardev_t *d)
{
char ch;
while(!(ch = active_read_buff_read())) {
uint8_t x;
while (!(i8042_status_read() & i8042_BUFFER_FULL_MASK))
;
x = i8042_data_read();
if (x & KEY_RELEASE)
key_released(x ^ KEY_RELEASE);
else
active_read_key_pressed(x);
}
return ch;
}
/** Poll for key press and release events.
*
* This function can be used to implement keyboard polling.
*/
void i8042_poll(void)
{
uint8_t x;
while (((x = i8042_status_read() & i8042_BUFFER_FULL_MASK))) {
x = i8042_data_read();
if (x & KEY_RELEASE)
key_released(x ^ KEY_RELEASE);
else
key_pressed(x);
}
}
/** @}
*/