/*
* Copyright (c) 2009 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @addtogroup genarch
* @{
*/
/**
* @file
* @brief Headers for Zilog 8530 serial controller.
*/
#ifndef KERN_Z8530_H_
#define KERN_Z8530_H_
#include <ddi/irq.h>
#include <arch/types.h>
#include <console/chardev.h>
#define WR0 0
#define WR1 1
#define WR2 2
#define WR3 3
#define WR4 4
#define WR5 5
#define WR6 6
#define WR7 7
#define WR8 8
#define WR9 9
#define WR10 10
#define WR11 11
#define WR12 12
#define WR13 13
#define WR14 14
#define WR15 15
#define RR0 0
#define RR1 1
#define RR2 2
#define RR3 3
#define RR8 8
#define RR10 10
#define RR12 12
#define RR13 13
#define RR14 14
#define RR15 15
/** Reset pending TX interrupt. */
#define WR0_TX_IP_RST (0x5 << 3)
#define WR0_ERR_RST (0x6 << 3)
/** Receive Interrupts Disabled. */
#define WR1_RID (0x0 << 3)
/** Receive Interrupt on First Character or Special Condition. */
#define WR1_RIFCSC (0x1 << 3)
/** Interrupt on All Receive Characters or Special Conditions. */
#define WR1_IARCSC (0x2 << 3)
/** Receive Interrupt on Special Condition. */
#define WR1_RISC (0x3 << 3)
/** Parity Is Special Condition. */
#define WR1_PISC (0x1 << 2)
/** Rx Enable. */
#define WR3_RX_ENABLE (0x1 << 0)
/** 8-bits per character. */
#define WR3_RX8BITSCH (0x3 << 6)
/** Master Interrupt Enable. */
#define WR9_MIE (0x1 << 3)
/** Receive Character Available. */
#define RR0_RCA (0x1 << 0)
/** z8530's registers. */
typedef struct {
union {
ioport8_t ctl_b;
ioport8_t status_b;
} __attribute__ ((packed));
uint8_t pad1;
ioport8_t data_b;
uint8_t pad2;
union {
ioport8_t ctl_a;
ioport8_t status_a;
} __attribute__ ((packed));
uint8_t pad3;
ioport8_t data_a;
} __attribute__ ((packed)) z8530_t;
/** Structure representing the z8530 device. */
typedef struct {
devno_t devno;
irq_t irq;
z8530_t *z8530;
indev_t kbrdin;
} z8530_instance_t;
extern devin_t *z8530_init(z8530_t *, devno_t, inr_t, cir_t, void *);
#endif
/** @}
*/