/*
* Copyright (C) 2001-2004 Jakub Jermar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch/i8259.h>
#include <cpu.h>
#include <arch/types.h>
#include <arch/asm.h>
#include <arch.h>
#include <print.h>
/*
* This is the PIC driver.
* Programmable Interrupt Controller for UP systems.
*/
void i8259_init(void)
{
/* ICW1: this is ICW1, ICW4 to follow */
outb(PIC_PIC0PORT1, PIC_ICW1 | PIC_NEEDICW4);
/* ICW2: IRQ 0 maps to INT IRQBASE */
outb(PIC_PIC0PORT2, IVT_IRQBASE);
/* ICW3: pic1 using IRQ IRQ_PIC1 */
outb(PIC_PIC0PORT2, 1 << IRQ_PIC1);
/* ICW4: i8086 mode */
outb(PIC_PIC0PORT2, 1);
/* ICW1: ICW1, ICW4 to follow */
outb(PIC_PIC1PORT1, PIC_ICW1 | PIC_NEEDICW4);
/* ICW2: IRQ 8 maps to INT (IVT_IRQBASE + 8) */
outb(PIC_PIC1PORT2, IVT_IRQBASE + 8);
/* ICW3: pic1 is known as PIC_PIC1ID */
outb(PIC_PIC1PORT2, PIC_PIC1ID);
/* ICW4: i8086 mode */
outb(PIC_PIC1PORT2, 1);
/*
* Register interrupt handler for the PIC spurious interrupt.
*/
trap_register(VECTOR_PIC_SPUR, pic_spurious);
/*
* Set the enable/disable IRQs handlers.
* Set the End-of-Interrupt handler.
*/
enable_irqs_function = pic_enable_irqs;
disable_irqs_function = pic_disable_irqs;
eoi_function = pic_eoi;
pic_disable_irqs(0xffff); /* disable all irq's */
pic_enable_irqs(1<<IRQ_PIC1); /* but enable pic1 */
}
void pic_enable_irqs(__u16 irqmask)
{
__u8 x;
if (irqmask & 0xff) {
x = inb(PIC_PIC0PORT2);
outb(PIC_PIC0PORT2, x & (~(irqmask & 0xff)));
}
if (irqmask >> 8) {
x = inb(PIC_PIC1PORT2);
outb(PIC_PIC1PORT2, x & (~(irqmask >> 8)));
}
}
void pic_disable_irqs(__u16 irqmask)
{
__u8 x;
if (irqmask & 0xff) {
x = inb(PIC_PIC0PORT2);
outb(PIC_PIC0PORT2, x | (irqmask & 0xff));
}
if (irqmask >> 8) {
x = inb(PIC_PIC1PORT2);
outb(PIC_PIC1PORT2, x | (irqmask >> 8));
}
}
void pic_eoi(void)
{
outb(0x20,0x20);
outb(0xa0,0x20);
}
void pic_spurious(__u8 n, __u32 stack[])
{
printf("cpu%d: PIC spurious interrupt\n", CPU
->id
);
}