Subversion Repositories HelenOS

Rev

Rev 2089 | Rev 2131 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2001-2004 Jakub Jermar
  3.  * Copyright (c) 2005-2006 Ondrej Palkovsky
  4.  * All rights reserved.
  5.  *
  6.  * Redistribution and use in source and binary forms, with or without
  7.  * modification, are permitted provided that the following conditions
  8.  * are met:
  9.  *
  10.  * - Redistributions of source code must retain the above copyright
  11.  *   notice, this list of conditions and the following disclaimer.
  12.  * - Redistributions in binary form must reproduce the above copyright
  13.  *   notice, this list of conditions and the following disclaimer in the
  14.  *   documentation and/or other materials provided with the distribution.
  15.  * - The name of the author may not be used to endorse or promote products
  16.  *   derived from this software without specific prior written permission.
  17.  *
  18.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  19.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  20.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  21.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  22.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  23.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  27.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28.  */
  29.  
  30. /** @addtogroup amd64  
  31.  * @{
  32.  */
  33. /** @file
  34.  */
  35.  
  36. #include <arch/pm.h>
  37. #include <arch/asm.h>
  38. #include <mm/as.h>
  39. #include <mm/frame.h>
  40. #include <memstr.h>
  41. #include <mm/slab.h>
  42.  
  43. /*
  44.  * There is no segmentation in long mode so we set up flat mode. In this
  45.  * mode, we use, for each privilege level, two segments spanning the
  46.  * whole memory. One is for code and one is for data.
  47.  */
  48.  
  49. descriptor_t gdt[GDT_ITEMS] = {
  50.     /* NULL descriptor */
  51.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
  52.     /* KTEXT descriptor */
  53.     { .limit_0_15  = 0xffff,
  54.       .base_0_15   = 0,
  55.       .base_16_23  = 0,
  56.       .access      = AR_PRESENT | AR_CODE | DPL_KERNEL | AR_READABLE ,
  57.       .limit_16_19 = 0xf,
  58.       .available   = 0,
  59.       .longmode    = 1,
  60.       .special     = 0,
  61.       .granularity = 1,
  62.       .base_24_31  = 0 },
  63.     /* KDATA descriptor */
  64.     { .limit_0_15  = 0xffff,
  65.       .base_0_15   = 0,
  66.       .base_16_23  = 0,
  67.       .access      = AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_KERNEL,
  68.       .limit_16_19 = 0xf,
  69.       .available   = 0,
  70.       .longmode    = 0,
  71.       .special     = 0,
  72.       .granularity = 1,
  73.       .base_24_31  = 0 },
  74.     /* UDATA descriptor */
  75.     { .limit_0_15  = 0xffff,
  76.       .base_0_15   = 0,
  77.       .base_16_23  = 0,
  78.       .access      = AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_USER,
  79.       .limit_16_19 = 0xf,
  80.       .available   = 0,
  81.       .longmode    = 0,
  82.       .special     = 1,
  83.       .granularity = 1,
  84.       .base_24_31  = 0 },
  85.     /* UTEXT descriptor */
  86.     { .limit_0_15  = 0xffff,
  87.       .base_0_15   = 0,
  88.       .base_16_23  = 0,
  89.       .access      = AR_PRESENT | AR_CODE | DPL_USER,
  90.       .limit_16_19 = 0xf,
  91.       .available   = 0,
  92.       .longmode    = 1,
  93.       .special     = 0,
  94.       .granularity = 1,
  95.       .base_24_31  = 0 },
  96.     /* KTEXT 32-bit protected, for protected mode before long mode */
  97.     { .limit_0_15  = 0xffff,
  98.       .base_0_15   = 0,
  99.       .base_16_23  = 0,
  100.       .access      = AR_PRESENT | AR_CODE | DPL_KERNEL | AR_READABLE,
  101.       .limit_16_19 = 0xf,
  102.       .available   = 0,
  103.       .longmode    = 0,
  104.       .special     = 1,
  105.       .granularity = 1,
  106.       .base_24_31  = 0 },
  107.     /* TSS descriptor - set up will be completed later,
  108.      * on AMD64 it is 64-bit - 2 items in table */
  109.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
  110.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
  111.     /* VESA Init descriptor */
  112. #ifdef CONFIG_FB   
  113.     { 0xffff, 0, VESA_INIT_SEGMENT>>12, AR_PRESENT | AR_CODE | DPL_KERNEL, 0xf, 0, 0, 0, 0, 0 }
  114. #endif
  115. };
  116.  
  117. idescriptor_t idt[IDT_ITEMS];
  118.  
  119. ptr_16_64_t gdtr = {.limit = sizeof(gdt), .base= (uint64_t) gdt };
  120. ptr_16_64_t idtr = {.limit = sizeof(idt), .base= (uint64_t) idt };
  121.  
  122. static tss_t tss;
  123. tss_t *tss_p = NULL;
  124.  
  125. void gdt_tss_setbase(descriptor_t *d, uintptr_t base)
  126. {
  127.     tss_descriptor_t *td = (tss_descriptor_t *) d;
  128.  
  129.     td->base_0_15 = base & 0xffff;
  130.     td->base_16_23 = ((base) >> 16) & 0xff;
  131.     td->base_24_31 = ((base) >> 24) & 0xff;
  132.     td->base_32_63 = ((base) >> 32);
  133. }
  134.  
  135. void gdt_tss_setlimit(descriptor_t *d, uint32_t limit)
  136. {
  137.     struct tss_descriptor *td = (tss_descriptor_t *) d;
  138.  
  139.     td->limit_0_15 = limit & 0xffff;
  140.     td->limit_16_19 = (limit >> 16) & 0xf;
  141. }
  142.  
  143. void idt_setoffset(idescriptor_t *d, uintptr_t offset)
  144. {
  145.     /*
  146.      * Offset is a linear address.
  147.      */
  148.     d->offset_0_15 = offset & 0xffff;
  149.     d->offset_16_31 = offset >> 16 & 0xffff;
  150.     d->offset_32_63 = offset >> 32;
  151. }
  152.  
  153. void tss_initialize(tss_t *t)
  154. {
  155.     memsetb((uintptr_t) t, sizeof(tss_t), 0);
  156. }
  157.  
  158. /*
  159.  * This function takes care of proper setup of IDT and IDTR.
  160.  */
  161. void idt_init(void)
  162. {
  163.     idescriptor_t *d;
  164.     int i;
  165.  
  166.     for (i = 0; i < IDT_ITEMS; i++) {
  167.         d = &idt[i];
  168.  
  169.         d->unused = 0;
  170.         d->selector = gdtselector(KTEXT_DES);
  171.  
  172.         d->present = 1;
  173.         d->type = AR_INTERRUPT; /* masking interrupt */
  174.  
  175.         idt_setoffset(d, ((uintptr_t) interrupt_handlers) + i*interrupt_handler_size);
  176.     }
  177. }
  178.  
  179. /** Initialize segmentation - code/data/idt tables
  180.  *
  181.  */
  182. void pm_init(void)
  183. {
  184.     descriptor_t *gdt_p = (struct descriptor *) gdtr.base;
  185.     tss_descriptor_t *tss_desc;
  186.  
  187.     /*
  188.      * Each CPU has its private GDT and TSS.
  189.      * All CPUs share one IDT.
  190.      */
  191.  
  192.     if (config.cpu_active == 1) {
  193.         idt_init();
  194.         /*
  195.          * NOTE: bootstrap CPU has statically allocated TSS, because
  196.          * the heap hasn't been initialized so far.
  197.          */
  198.         tss_p = &tss;
  199.     }
  200.     else {
  201.         /* We are going to use malloc, which may return
  202.          * non boot-mapped pointer, initialize the CR3 register
  203.          * ahead of page_init */
  204.         write_cr3((uintptr_t) AS_KERNEL->genarch.page_table);
  205.  
  206.         tss_p = (struct tss *) malloc(sizeof(tss_t), FRAME_ATOMIC);
  207.         if (!tss_p)
  208.             panic("could not allocate TSS\n");
  209.     }
  210.  
  211.     tss_initialize(tss_p);
  212.  
  213.     tss_desc = (tss_descriptor_t *) (&gdt_p[TSS_DES]);
  214.     tss_desc->present = 1;
  215.     tss_desc->type = AR_TSS;
  216.     tss_desc->dpl = PL_KERNEL;
  217.    
  218.     gdt_tss_setbase(&gdt_p[TSS_DES], (uintptr_t) tss_p);
  219.     gdt_tss_setlimit(&gdt_p[TSS_DES], TSS_BASIC_SIZE - 1);
  220.  
  221.     gdtr_load(&gdtr);
  222.     idtr_load(&idtr);
  223.     /*
  224.      * As of this moment, the current CPU has its own GDT pointing
  225.      * to its own TSS. We just need to load the TR register.
  226.      */
  227.     tr_load(gdtselector(TSS_DES));
  228. }
  229.  
  230. /** @}
  231.  */
  232.