Subversion Repositories HelenOS

Rev

Rev 4708 | Rev 4722 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2008 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup udp
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  UDP module implementation.
  35.  *  @see udp.h
  36.  */
  37.  
  38. #include <async.h>
  39. #include <fibril_sync.h>
  40. #include <malloc.h>
  41.  
  42. #include <ipc/ipc.h>
  43. #include <ipc/services.h>
  44.  
  45. #include "../../err.h"
  46. #include "../../messages.h"
  47. #include "../../modules.h"
  48.  
  49. #include "../../structures/dynamic_fifo.h"
  50. #include "../../structures/packet/packet_client.h"
  51.  
  52. #include "../../include/in.h"
  53. #include "../../include/inet.h"
  54. #include "../../include/ip_client.h"
  55. #include "../../include/ip_interface.h"
  56. #include "../../include/ip_protocols.h"
  57. #include "../../include/icmp_client.h"
  58. #include "../../include/icmp_interface.h"
  59. #include "../../include/socket_codes.h"
  60. #include "../../include/socket_errno.h"
  61.  
  62. #include "../../socket/socket_core.h"
  63. #include "../../socket/socket_messages.h"
  64.  
  65. #include "../tl_messages.h"
  66.  
  67. #include "udp.h"
  68. #include "udp_header.h"
  69. #include "udp_module.h"
  70.  
  71. /** Maximum UDP fragment size.
  72.  */
  73. #define MAX_UDP_FRAGMENT_SIZE   65535
  74.  
  75. /** Free ports pool start.
  76.  */
  77. #define UDP_FREE_PORTS_START    1025
  78.  
  79. /** Free ports pool end.
  80.  */
  81. #define UDP_FREE_PORTS_END      65535
  82.  
  83. /** Processes the received UDP packet queue.
  84.  *  Is used as an entry point from the underlying IP module.
  85.  *  Notifies the destination socket application.
  86.  *  Releases the packet on error or send an ICMP error notification..
  87.  *  @param device_id The device identifier. Ignored parameter.
  88.  *  @param packet The received packet queue. Input/output parameter.
  89.  *  @param receiver The target service. Ignored parameter.
  90.  *  @param error The packet error reporting service. Prefixes the received packet. Input parameter.
  91.  *  @returns EOK on success.
  92.  *  @returns EINVAL if the packet is not valid.
  93.  *  @returns EINVAL if the stored packet address is not the an_addr_t.
  94.  *  @returns EINVAL if the packet does not contain any data.
  95.  *  @returns NO_DATA if the packet content is shorter than the user datagram header.
  96.  *  @returns ENOMEM if there is not enough memory left.
  97.  *  @returns EADDRNOTAVAIL if the destination socket does not exist.
  98.  *  @returns Other error codes as defined for the ip_client_process_packet() function.
  99.  */
  100. int udp_received_msg( device_id_t device_id, packet_t packet, services_t receiver, services_t error );
  101.  
  102. /** Releases the packet and returns the result.
  103.  *  @param packet The packet queue to be released. Input parameter.
  104.  *  @param result The result to be returned. Input parameter.
  105.  *  @return The result parameter.
  106.  */
  107. int udp_release_and_return( packet_t packet, int result );
  108.  
  109. /** Sends the port unreachable ICMP notification.
  110.  *  Sends the first packet and releases all the others.
  111.  *  Releases the packet queu on error.
  112.  *  @param packet The packet to be send. Input parameter.
  113.  *  @param error The packet error reporting service. Prefixes the received packet. Input parameter.
  114.  */
  115. void    udp_send_icmp_port_unreachable( packet_t packet, services_t error );
  116.  
  117. /** @name Socket messages processing functions
  118.  */
  119. /*@{*/
  120.  
  121. /** Processes the socket client messages.
  122.  *  Runs until the client module disconnects.
  123.  *  @param callid The message identifier. Input parameter.
  124.  *  @param call The message parameters. Input parameter.
  125.  *  @returns EOK on success.
  126.  *  @see socket.h
  127.  */
  128. int udp_process_client_messages( ipc_callid_t callid, ipc_call_t call );
  129.  
  130. /** Sends data from the socket to the remote address.
  131.  *  Binds the socket to a free port if not already connected/bound.
  132.  *  Handles the NET_SOCKET_SENDTO message.
  133.  *  @param local_sockets The application local sockets. Input/output parameter.
  134.  *  @param socket_id Socket identifier. Input parameter.
  135.  *  @param addr The destination address. Input parameter.
  136.  *  @param addrlen The address length. Input parameter.
  137.  *  @param fragments The number of data fragments. Input parameter.
  138.  *  @param flags Various send flags. Input parameter.
  139.  *  @returns EOK on success.
  140.  *  @returns EAFNOTSUPPORT if the address family is not supported.
  141.  *  @returns ENOTSOCK if the socket is not found.
  142.  *  @returns EINVAL if the address is invalid.
  143.  *  @returns ENOTCONN if the sending socket is not and cannot be bound.
  144.  *  @returns ENOMEM if there is not enough memory left.
  145.  *  @returns Other error codes as defined for the socket_read_packet_data() function.
  146.  *  @returns Other error codes as defined for the ip_client_prepare_packet() function.
  147.  *  @returns Other error codes as defined for the ip_send_msg() function.
  148.  */
  149. int udp_sendto_message( socket_cores_ref local_sockets, int socket_id, void * addr, size_t addrlen, int fragments, int flags );
  150.  
  151. /** Receives data to the socket.
  152.  *  Handles the NET_SOCKET_RECVFROM message.
  153.  *  @param local_sockets The application local sockets. Input parameter.
  154.  *  @param socket_id Socket identifier. Input parameter.
  155.  *  @param flags Various receive flags. Input parameter.
  156.  *  @returns The number of bytes received.
  157.  *  @returns ENOTSOCK if the socket is not found.
  158.  *  @returns NO_DATA if there are no received packets or data.
  159.  *  @returns ENOMEM if there is not enough memory left.
  160.  *  @returns EINVAL if the received address is not an IP address.
  161.  *  @returns Other error codes as defined for the packet_translate() function.
  162.  *  @returns Other error codes as defined for the socket_write_data() function.
  163.  */
  164. int udp_recvfrom_message( socket_cores_ref local_sockets, int socket_id, int flags );
  165.  
  166. /*@}*/
  167.  
  168. /** Receives data from the socket.
  169.  *  The received data buffer is allocated and returned.
  170.  *  @param data The data buffer to be filled. Output parameter.
  171.  *  @param length The buffer length. Output parameter.
  172.  *  @returns EOK on success.
  173.  *  @returns EBADMEM if the data or the length parameter is NULL.
  174.  *  @returns EINVAL if the client does not send data.
  175.  *  @returns ENOMEM if there is not enough memory left.
  176.  *  @returns Other error codes as defined for the ipc_data_write_finalize() function.
  177.  */
  178. int socket_read_data( void ** data, size_t * length );
  179.  
  180. /** Receives data from the socket into a packet.
  181.  *  @param packet The new created packet. Output parameter.
  182.  *  @param prefix Reserved packet data prefix length. Input parameter.
  183.  *  @param address_in The destination address to be set. Input parameter.
  184.  *  @returns Number of bytes received.
  185.  *  @returns EINVAL if the client does not send data.
  186.  *  @returns ENOMEM if there is not enough memory left.
  187.  *  @returns Other error codes as defined for the ipc_data_read_finalize() function.
  188.  */
  189. int socket_read_packet_data( packet_ref packet, size_t prefix, struct sockaddr_in * address_in );
  190.  
  191. /** Replies the data to the socket.
  192.  *  @param data The data buffer to be sent. Input parameter.
  193.  *  @param data_length The buffer length. Input parameter.
  194.  *  @returns EOK on success.
  195.  *  @returns EINVAL if the client does not expect all the data.
  196.  *  @returns Other error codes as defined for the ipc_data_read_finalize() function.
  197.  */
  198. int socket_write_data( void * data, size_t data_length );
  199.  
  200. /** UDP global data.
  201.  */
  202. udp_globals_t   udp_globals;
  203.  
  204. int udp_initialize( async_client_conn_t client_connection ){
  205.     ERROR_DECLARE;
  206.  
  207.     fibril_rwlock_initialize( & udp_globals.lock );
  208.     fibril_rwlock_write_lock( & udp_globals.lock );
  209.     udp_globals.icmp_phone = icmp_connect_module( SERVICE_ICMP );
  210.     if( udp_globals.icmp_phone < 0 ){
  211.         return udp_globals.icmp_phone;
  212.     }
  213.     udp_globals.ip_phone = ip_bind_service( SERVICE_IP, IPPROTO_UDP, SERVICE_UDP, client_connection, udp_received_msg );
  214.     if( udp_globals.ip_phone < 0 ){
  215.         return udp_globals.ip_phone;
  216.     }
  217.     ERROR_PROPAGATE( ip_packet_size_req( udp_globals.ip_phone, -1, & udp_globals.addr_len, & udp_globals.prefix, & udp_globals.content, & udp_globals.suffix ));
  218.     ERROR_PROPAGATE( socket_ports_initialize( & udp_globals.sockets ));
  219.     udp_globals.prefix += sizeof( udp_header_t );
  220.     udp_globals.content -= sizeof( udp_header_t );
  221.     udp_globals.last_used_port = UDP_FREE_PORTS_START - 1;
  222.     fibril_rwlock_write_unlock( & udp_globals.lock );
  223.     return EOK;
  224. }
  225.  
  226. int udp_received_msg( device_id_t device_id, packet_t packet, services_t receiver, services_t error ){
  227.     ERROR_DECLARE;
  228.  
  229.     size_t          length;
  230.     size_t          offset;
  231.     int             result;
  232.     uint8_t *       data;
  233.     udp_header_ref  header;
  234.     socket_core_ref *   socket;
  235.     packet_t        next_packet;
  236.     size_t          total_length;
  237. //  uint16_t        checksum;
  238.     int             fragments;
  239.     packet_t        tmp_packet;
  240.     icmp_type_t     type;
  241.     icmp_code_t     code;
  242.  
  243.     if( error ){
  244.         switch( error ){
  245.             case SERVICE_ICMP:
  246.                 // process error
  247.                 // TODO remove debug dump
  248.                 // length = icmp_client_header_length( packet );
  249.                 result = icmp_client_process_packet( packet, & type, & code, NULL, NULL );
  250.                 if( result < 0 ){
  251.                     return udp_release_and_return( packet, result );
  252.                 }
  253.                 printf( "ICMP error %d (%d) in packet %d\n", type, code, packet_get_id( packet ) );
  254.                 length = ( size_t ) result;
  255.                 if( ERROR_OCCURRED( packet_trim( packet, length, 0 ))){
  256.                     return udp_release_and_return( packet, ERROR_CODE );
  257.                 }
  258.                 break;
  259.             default:
  260.                 return udp_release_and_return( packet, ENOTSUP );
  261.         }
  262.     }
  263.     // TODO process received ipopts?
  264.     result = ip_client_process_packet( packet, NULL, NULL, NULL, NULL, NULL );
  265.     if( result < 0 ){
  266.         return udp_release_and_return( packet, result );
  267.     }
  268.     offset = ( size_t ) result;
  269.  
  270.     length = packet_get_data_length( packet );
  271.     if( length <= 0 ){
  272.         return udp_release_and_return( packet, EINVAL );
  273.     }
  274.     if( length < sizeof( udp_header_t ) + offset ){
  275.         return udp_release_and_return( packet, NO_DATA );
  276.     }
  277.     data = packet_get_data( packet );
  278.     if( ! data ){
  279.         return udp_release_and_return( packet, NO_DATA );
  280.     }
  281.     // get udp header
  282.     header = ( udp_header_ref )( data + offset );
  283.     // find the destination socket
  284.     socket = socket_ports_find( & udp_globals.sockets, ntohs( header->dest ));
  285.     if( ! socket ){
  286.         udp_send_icmp_port_unreachable( packet, error );
  287.         return EADDRNOTAVAIL;
  288.     }
  289.     // trim after successful processing to be able to send an ICMP error message!
  290.     ERROR_PROPAGATE( packet_trim( packet, offset, 0 ));
  291.     // count the received packet fragments
  292.     next_packet = packet;
  293.     fragments = 0;
  294.     total_length = ntohs( header->len );
  295.     do{
  296.         ++ fragments;
  297.         length = packet_get_data_length( packet );
  298.         if( length <= 0 ){
  299.             return udp_release_and_return( packet, NO_DATA );
  300.         }
  301.         if( total_length < length ){
  302.             // cut of the suffix if too long
  303.             if( ERROR_OCCURRED( packet_trim( next_packet, 0, length - total_length ))){
  304.                 return udp_release_and_return( packet, ERROR_CODE );
  305.             }
  306.             // relese the rest of the packet fragments
  307.             tmp_packet = pq_next( next_packet );
  308.             while( tmp_packet ){
  309.                 next_packet = pq_detach( tmp_packet );
  310.                 pq_release( udp_globals.net_phone, packet_get_id( tmp_packet ));
  311.                 tmp_packet = next_packet;
  312.             }
  313.             break;
  314.         }
  315.         total_length -= length;
  316.     /*  if( header->header_checksum ){
  317.         }
  318.     */
  319.     }while(( next_packet = pq_next( next_packet )) && ( total_length > 0 ));
  320.     // queue the received packet
  321.     if( ERROR_OCCURRED( dyn_fifo_push( &( ** socket ).received, packet_get_id( packet ), SOCKET_MAX_RECEIVED_SIZE ))){
  322.         return udp_release_and_return( packet, ERROR_CODE );
  323.     }
  324.  
  325.     // notify the destination socket
  326.     async_msg_2(( ** socket ).phone, NET_SOCKET_RECEIVED, ( ipcarg_t ) ( ** socket ).socket_id, ( ipcarg_t ) fragments );
  327.     return EOK;
  328. }
  329.  
  330. int udp_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count ){
  331.     ERROR_DECLARE;
  332.  
  333.     packet_t    packet;
  334.  
  335.     * answer_count = 0;
  336.     switch( IPC_GET_METHOD( * call )){
  337.         case NET_TL_RECEIVED:
  338.             fibril_rwlock_read_lock( & udp_globals.lock );
  339.             if( ! ERROR_OCCURRED( packet_translate( udp_globals.net_phone, & packet, IPC_GET_PACKET( call )))){
  340.                 ERROR_CODE = udp_received_msg( IPC_GET_DEVICE( call ), packet, SERVICE_UDP, IPC_GET_ERROR( call ));
  341.             }
  342.             fibril_rwlock_read_unlock( & udp_globals.lock );
  343.             return ERROR_CODE;
  344.         case IPC_M_CONNECT_TO_ME:
  345.             return udp_process_client_messages( callid, * call );
  346.     }
  347.     return ENOTSUP;
  348. }
  349.  
  350. int udp_process_client_messages( ipc_callid_t callid, ipc_call_t call ){
  351.     int                     res;
  352.     bool                    keep_on_going = true;
  353.     socket_cores_t          local_sockets;
  354.     int                     app_phone = IPC_GET_PHONE( & call );
  355.     void *                  addr;
  356.     size_t                  addrlen;
  357.     fibril_rwlock_t         lock;
  358.     ipc_call_t              answer;
  359.     int                     answer_count;
  360.  
  361.     /*
  362.      * Accept the connection
  363.      *  - Answer the first IPC_M_CONNECT_ME_TO call.
  364.      */
  365.     ipc_answer_0( callid, EOK );
  366.  
  367.     socket_cores_initialize( & local_sockets );
  368.     fibril_rwlock_initialize( & lock );
  369.  
  370.     while( keep_on_going ){
  371.         // refresh data
  372.         refresh_answer( & answer, & answer_count );
  373.  
  374.         callid = async_get_call( & call );
  375. //      printf( "message %d\n", IPC_GET_METHOD( * call ));
  376.  
  377.         switch( IPC_GET_METHOD( call )){
  378.             case IPC_M_PHONE_HUNGUP:
  379.                 keep_on_going = false;
  380.                 res = EOK;
  381.                 break;
  382.             case NET_SOCKET:
  383.                 fibril_rwlock_write_lock( & lock );
  384.                 res = socket_create( & local_sockets, app_phone, SOCKET_SET_SOCKET_ID( answer ));
  385.                 fibril_rwlock_write_unlock( & lock );
  386.                 * SOCKET_SET_HEADER_SIZE( answer ) = sizeof( udp_header_t );
  387.                 * SOCKET_SET_DATA_FRAGMENT_SIZE( answer ) = MAX_UDP_FRAGMENT_SIZE;
  388.                 answer_count = 3;
  389.                 break;
  390.             case NET_SOCKET_BIND:
  391.                 res = socket_read_data( & addr, & addrlen );
  392.                 if( res == EOK ){
  393.                     fibril_rwlock_write_lock( & lock );
  394.                     fibril_rwlock_write_lock( & udp_globals.lock );
  395.                     res = socket_bind( & local_sockets, & udp_globals.sockets, SOCKET_GET_SOCKET_ID( call ), addr, addrlen, UDP_FREE_PORTS_START, UDP_FREE_PORTS_END, udp_globals.last_used_port );
  396.                     fibril_rwlock_write_unlock( & udp_globals.lock );
  397.                     fibril_rwlock_write_unlock( & lock );
  398.                     free( addr );
  399.                 }
  400.                 break;
  401.             case NET_SOCKET_SENDTO:
  402.                 res = socket_read_data( & addr, & addrlen );
  403.                 if( res == EOK ){
  404.                     fibril_rwlock_read_lock( & lock );
  405.                     fibril_rwlock_read_lock( & udp_globals.lock );
  406.                     res = udp_sendto_message( & local_sockets, SOCKET_GET_SOCKET_ID( call ), addr, addrlen, SOCKET_GET_DATA_FRAGMENTS( call ), SOCKET_GET_FLAGS( call ));
  407.                     fibril_rwlock_read_unlock( & udp_globals.lock );
  408.                     fibril_rwlock_read_unlock( & lock );
  409.                     free( addr );
  410.                 }
  411.                 break;
  412.             case NET_SOCKET_RECVFROM:
  413.                 fibril_rwlock_read_lock( & lock );
  414.                 fibril_rwlock_read_lock( & udp_globals.lock );
  415.                 res = udp_recvfrom_message( & local_sockets, SOCKET_GET_SOCKET_ID( call ), SOCKET_GET_FLAGS( call ));
  416.                 fibril_rwlock_read_unlock( & udp_globals.lock );
  417.                 fibril_rwlock_read_unlock( & lock );
  418.                 if( res > 0 ){
  419.                     * SOCKET_SET_READ_DATA_LENGTH( answer ) = res;
  420.                     * SOCKET_SET_ADDRESS_LENGTH( answer ) = sizeof( struct sockaddr_in );
  421.                     answer_count = 2;
  422.                     res = EOK;
  423.                 }
  424.                 break;
  425.             case NET_SOCKET_CLOSE:
  426.                 fibril_rwlock_write_lock( & lock );
  427.                 fibril_rwlock_write_lock( & udp_globals.lock );
  428.                 res = socket_destroy( udp_globals.net_phone, SOCKET_GET_SOCKET_ID( call ), & local_sockets, & udp_globals.sockets );
  429.                 fibril_rwlock_write_unlock( & udp_globals.lock );
  430.                 fibril_rwlock_write_unlock( & lock );
  431.                 break;
  432.             case NET_SOCKET_GETSOCKOPT:
  433.             case NET_SOCKET_SETSOCKOPT:
  434.             default:
  435.                 res = ENOTSUP;
  436.                 break;
  437.         }
  438.  
  439. //      printf( "res = %d\n", res );
  440.  
  441.         answer_call( callid, res, & answer, answer_count );
  442.     }
  443.  
  444.     socket_cores_destroy( & local_sockets );
  445.  
  446.     return EOK;
  447. }
  448.  
  449. int udp_sendto_message( socket_cores_ref local_sockets, int socket_id, void * addr, size_t addrlen, int fragments, int flags ){
  450.     ERROR_DECLARE;
  451.  
  452.     socket_core_ref         socket;
  453.     struct sockaddr *       address;
  454.     struct sockaddr_in *    address_in;
  455.     packet_t                packet;
  456.     packet_t                next_packet;
  457.     udp_header_ref          header;
  458.     int                     index;
  459.     size_t                  total_length;
  460.     int                     result;
  461.  
  462.     if( addrlen < sizeof( struct sockaddr )) return EINVAL;
  463.     address = ( struct sockaddr * ) addr;
  464.     switch( address->sa_family ){
  465.         case AF_INET:
  466.             if( addrlen != sizeof( struct sockaddr_in )) return EINVAL;
  467.             address_in = ( struct sockaddr_in * ) addr;
  468.             socket = socket_cores_find( local_sockets, socket_id );
  469.             if( ! socket ) return ENOTSOCK;
  470.  
  471.             // bind the socket to a random free port if not bound
  472.             while( socket->port <= 0 ){
  473.                 // try to find a free port
  474.                 fibril_rwlock_read_unlock( & udp_globals.lock );
  475.                 fibril_rwlock_write_lock( & udp_globals.lock );
  476.                 if( socket->port <= 0 ){
  477.                     ERROR_PROPAGATE( socket_bind_free_port( & udp_globals.sockets, socket, UDP_FREE_PORTS_START, UDP_FREE_PORTS_END, udp_globals.last_used_port ));
  478.                     // set the next port as the search starting port number
  479.                     udp_globals.last_used_port = socket->port;
  480.                 }
  481.                 fibril_rwlock_write_unlock( & udp_globals.lock );
  482.                 fibril_rwlock_read_lock( & udp_globals.lock );
  483.             }
  484.             // TODO do not ask all the time
  485.             ERROR_PROPAGATE( ip_packet_size_req( udp_globals.ip_phone, -1, & udp_globals.addr_len, & udp_globals.prefix, & udp_globals.content, & udp_globals.suffix ));
  486.  
  487.             // read the first packet fragment
  488.             result = socket_read_packet_data( & packet, sizeof( udp_header_t ), address_in );
  489.             if( result < 0 ) return result;
  490.             total_length = ( size_t ) result;
  491.             // prefix the udp header
  492.             header = PACKET_PREFIX( packet, udp_header_t );
  493.             if( ! header ){
  494.                 pq_release( udp_globals.net_phone, packet_get_id( packet ));
  495.                 return ENOMEM;
  496.             }
  497.             // read the rest of the packet fragments
  498.             for( index = 1; index < fragments; ++ index ){
  499.                 result = socket_read_packet_data( & next_packet, 0, address_in );
  500.                 if( result < 0 ){
  501.                     return udp_release_and_return( packet, result );
  502.                 }
  503.                 packet = pq_add( packet, next_packet, index, 0 );
  504.                 total_length += ( size_t ) result;
  505.             }
  506.             // set the udp header
  507.             header->source = htons( socket->port );
  508.             header->dest = htons( address_in->sin_port );
  509.             header->len = htons( total_length + sizeof( udp_header_t ));
  510.             // TODO my ip address for the pseudo header checksum
  511.             header->check = 0;
  512.             // prepare the first packet fragment
  513.             if( ERROR_OCCURRED( ip_client_prepare_packet( packet, IPPROTO_UDP, 0, 0, 0, 0 ))){
  514.                 pq_release( udp_globals.net_phone, packet_get_id( packet ));
  515.                 return ERROR_CODE;
  516.             }
  517.             // send the packet
  518.             return ip_send_msg( udp_globals.ip_phone, socket->device_id, packet, SERVICE_UDP, 0 );
  519.         // TODO IPv6
  520.     }
  521.     return EAFNOSUPPORT;
  522. }
  523.  
  524. int udp_recvfrom_message( socket_cores_ref local_sockets, int socket_id, int flags ){
  525.     ERROR_DECLARE;
  526.  
  527.     socket_core_ref socket;
  528.     int             packet_id;
  529.     packet_t        packet;
  530.     udp_header_ref  header;
  531.     struct sockaddr_in      address;
  532.     size_t          length;
  533.     packet_t        next_packet;
  534.     uint8_t *       data;
  535.     size_t          fragments;
  536.     size_t *        lengths;
  537.     int             result;
  538.     size_t          index;
  539.     uint8_t *       addr;
  540.  
  541.     // find the socket
  542.     socket = socket_cores_find( local_sockets, socket_id );
  543.     if( ! socket ) return ENOTSOCK;
  544.     // get the next received packet
  545.     packet_id = dyn_fifo_value( & socket->received );
  546.     if( packet_id < 0 ) return NO_DATA;
  547.     ERROR_PROPAGATE( packet_translate( udp_globals.net_phone, & packet, packet_id ));
  548.     // get udp header
  549.     data = packet_get_data( packet );
  550.     if( ! data ){
  551.         pq_release( udp_globals.net_phone, packet_id );
  552.         return NO_DATA;
  553.     }
  554.     header = ( udp_header_ref ) data;
  555.     // set the source address
  556.     address.sin_family = PF_INET;
  557.     address.sin_port = ntohs( header->source );
  558.     result = packet_get_addr( packet, & addr, NULL );
  559.     if( result != sizeof( address.sin_addr.s_addr )){
  560.         pq_release( udp_globals.net_phone, packet_id );
  561.         return EINVAL;
  562.     }
  563.     address.sin_addr.s_addr = *(( uint32_t * ) addr );
  564.     bzero( & address.sin_zero, sizeof( address.sin_zero ));
  565.     // send the source address
  566.     ERROR_PROPAGATE( socket_write_data( & address, sizeof( address )));
  567.     next_packet = pq_next( packet );
  568.     if( ! next_packet ){
  569.         // write all if only one fragment
  570.         ERROR_PROPAGATE( socket_write_data( data + sizeof( udp_header_t ), packet_get_data_length( packet ) - sizeof( udp_header_t )));
  571.         // store the total length
  572.         length = packet_get_data_length( packet ) - sizeof( udp_header_t );
  573.     }else{
  574.         // count the packet fragments
  575.         fragments = 1;
  576.         next_packet = pq_next( packet );
  577.         while(( next_packet = pq_next( next_packet ))){
  578.             ++ fragments;
  579.         }
  580.         // compute and store the fragment lengths
  581.         lengths = ( size_t * ) malloc( sizeof( size_t ) * fragments + sizeof( size_t ));
  582.         if( ! lengths ) return ENOMEM;
  583.         lengths[ 0 ] = packet_get_data_length( packet ) - sizeof( udp_header_t );
  584.         lengths[ fragments ] = lengths[ 0 ];
  585.         next_packet = pq_next( packet );
  586.         for( index = 1; index < fragments; ++ index ){
  587.             lengths[ index ] = packet_get_data_length( next_packet );
  588.             lengths[ fragments ] += lengths[ index ];
  589.             next_packet = pq_next( packet );
  590.         }while( next_packet );
  591.         // write the fragment lengths
  592.         ERROR_PROPAGATE( socket_write_data( lengths, sizeof( int ) * ( fragments + 1 )));
  593.         // write the first fragment
  594.         ERROR_PROPAGATE( socket_write_data( data + sizeof( udp_header_t ), lengths[ 0 ] ));
  595.         next_packet = pq_next( packet );
  596.         // write the rest of the fragments
  597.         for( index = 1; index < fragments; ++ index ){
  598.             ERROR_PROPAGATE( socket_write_data( packet_get_data( next_packet ), lengths[ index ] ));
  599.             next_packet = pq_next( packet );
  600.         }while( next_packet );
  601.         // store the total length
  602.         length = lengths[ fragments ];
  603.         free( lengths );
  604.     }
  605.     // release the packet
  606.     dyn_fifo_pop( & socket->received );
  607.     pq_release( udp_globals.net_phone, packet_get_id( packet ));
  608.     // return the total length
  609.     return ( int ) length;
  610. }
  611.  
  612. int socket_write_data( void * data, size_t data_length ){
  613.     size_t          length;
  614.     ipc_callid_t    callid;
  615.  
  616.     if(( ! ipc_data_read_receive( & callid, & length ))
  617.     || ( length < data_length )){
  618.         return EINVAL;
  619.     }
  620.     return ipc_data_read_finalize( callid, data, data_length );
  621. }
  622.  
  623. int socket_read_data( void ** data, size_t * length ){
  624.     ERROR_DECLARE;
  625.  
  626.     ipc_callid_t    callid;
  627.  
  628.     if( !( data && length )) return EBADMEM;
  629.     if( ! ipc_data_write_receive( & callid, length )) return EINVAL;
  630.     * data = malloc( * length );
  631.     if( !( * data )) return ENOMEM;
  632.     if( ERROR_OCCURRED( ipc_data_write_finalize( callid, * data, * length ))){
  633.         free( data );
  634.         return ERROR_CODE;
  635.     }
  636.     return EOK;
  637. }
  638.  
  639. int socket_read_packet_data( packet_ref packet, size_t prefix, struct sockaddr_in * address_in ){
  640.     ERROR_DECLARE;
  641.  
  642.     ipc_callid_t    callid;
  643.     size_t          length;
  644.     void *          data;
  645.  
  646.     // get the data length
  647.     if( ! ipc_data_write_receive( & callid, & length )) return EINVAL;
  648.     // get a new packet
  649.     * packet = packet_get_4( udp_globals.net_phone, length, udp_globals.addr_len, prefix + udp_globals.prefix, udp_globals.suffix );
  650.     if( ! packet ) return ENOMEM;
  651.     // allocate space in the packet
  652.     data = packet_suffix( * packet, length );
  653.     if( ! data ){
  654.         pq_release( udp_globals.net_phone, packet_get_id( * packet ));
  655.         return ENOMEM;
  656.     }
  657.     // read the data into the packet
  658.     if( ERROR_OCCURRED( ipc_data_write_finalize( callid, data, length ))
  659.     // set the packet destination address
  660.     || ERROR_OCCURRED( packet_set_addr( * packet, NULL, ( uint8_t * ) & address_in->sin_addr.s_addr, sizeof( address_in->sin_addr.s_addr )))){
  661.         pq_release( udp_globals.net_phone, packet_get_id( * packet ));
  662.         return ERROR_CODE;
  663.     }
  664.     return ( int ) length;
  665. }
  666.  
  667. int udp_release_and_return( packet_t packet, int result ){
  668.     pq_release( udp_globals.net_phone, packet_get_id( packet ));
  669.     return result;
  670. }
  671.  
  672. void udp_send_icmp_port_unreachable( packet_t packet, services_t error ){
  673.     packet_t    next;
  674.     uint8_t *   src;
  675.     int         length;
  676.  
  677.     // detach the first packet and release the others
  678.     next = pq_detach( packet );
  679.     if( next ){
  680.         pq_release( udp_globals.net_phone, packet_get_id( next ));
  681.     }
  682.     length = packet_get_addr( packet, & src, NULL );
  683.     if(( length > 0 )
  684.     && ( ! error )
  685.     && ( udp_globals.icmp_phone >= 0 )
  686.     // set both addresses to the source one (avoids the source address deletion before setting the destination one)
  687.     && ( packet_set_addr( packet, src, src, ( size_t ) length ) == EOK )){
  688.         icmp_destination_unreachable_msg( udp_globals.icmp_phone, ICMP_PORT_UNREACH, 0, packet );
  689.     }else{
  690.         udp_release_and_return( packet, EINVAL );
  691.     }
  692. }
  693.  
  694. /** @}
  695.  */
  696.