Subversion Repositories HelenOS

Rev

Rev 4708 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup nildummy
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  Dummy network interface layer module implementation.
  35.  *  @see nildummy.h
  36.  */
  37.  
  38. #include <async.h>
  39. #include <malloc.h>
  40. #include <mem.h>
  41. #include <stdio.h>
  42. #include <string.h>
  43.  
  44. #include <ipc/ipc.h>
  45. #include <ipc/services.h>
  46.  
  47. #include "../../err.h"
  48. #include "../../messages.h"
  49. #include "../../modules.h"
  50.  
  51. #include "../../include/device.h"
  52. #include "../../include/netif_interface.h"
  53. #include "../../include/nil_interface.h"
  54. #include "../../include/il_interface.h"
  55.  
  56. #include "../../structures/measured_strings.h"
  57. #include "../../structures/packet/packet.h"
  58.  
  59. #include "../nil_module.h"
  60.  
  61. #include "nildummy.h"
  62.  
  63. /** Default maximum transmission unit.
  64.  */
  65. #define NET_DEFAULT_MTU 1500
  66.  
  67. /** Network interface layer module global data.
  68.  */
  69. nildummy_globals_t  nildummy_globals;
  70.  
  71. /** @name Message processing functions
  72.  */
  73. /*@{*/
  74.  
  75. /** Processes IPC messages from the registered device driver modules in an infinite loop.
  76.  *  @param iid The message identifier. Input parameter.
  77.  *  @param icall The message parameters. Input/output parameter.
  78.  */
  79. void    nildummy_receiver( ipc_callid_t iid, ipc_call_t * icall );
  80.  
  81. /** Registers new device or updates the MTU of an existing one.
  82.  *  Determines the device local hardware address.
  83.  *  @param device_id The new device identifier. Input parameter.
  84.  *  @param service The device driver service. Input parameter.
  85.  *  @param mtu The device maximum transmission unit. Input parameter.
  86.  *  @returns EOK on success.
  87.  *  @returns EEXIST if the device with the different service exists.
  88.  *  @returns ENOMEM if there is not enough memory left.
  89.  *  @returns Other error codes as defined for the netif_bind_service() function.
  90.  *  @returns Other error codes as defined for the netif_get_addr() function.
  91.  */
  92. int nildummy_device_message( device_id_t device_id, services_t service, size_t mtu );
  93.  
  94. /** Returns the device packet dimensions for sending.
  95.  *  @param device_id The device identifier. Input parameter.
  96.  *  @param addr_len The minimum reserved address length. Output parameter.
  97.  *  @param prefix The minimum reserved prefix size. Output parameter.
  98.  *  @param content The maximum content size. Output parameter.
  99.  *  @param suffix The minimum reserved suffix size. Output parameter.
  100.  *  @returns EOK on success.
  101.  *  @returns EBADMEM if either one of the parameters is NULL.
  102.  *  @returns ENOENT if there is no such device.
  103.  */
  104. int nildummy_packet_space_message( device_id_t device_id, size_t * addr_len, size_t * prefix, size_t * content, size_t * suffix );
  105.  
  106. /** Registers receiving module service.
  107.  *  Passes received packets for this service.
  108.  *  @param service The module service. Input parameter.
  109.  *  @param phone The service phone. Input parameter.
  110.  *  @returns EOK on success.
  111.  *  @returns ENOENT if the service is not known.
  112.  *  @returns ENOMEM if there is not enough memory left.
  113.  */
  114. int nildummy_register_message( services_t service, int phone );
  115.  
  116. /** Sends the packet queue.
  117.  *  @param device_id The device identifier. Input parameter.
  118.  *  @param packet The packet queue. Input parameter.
  119.  *  @param sender The sending module service. Input parameter.
  120.  *  @returns EOK on success.
  121.  *  @returns ENOENT if there no such device.
  122.  *  @returns EINVAL if the service parameter is not known.
  123.  */
  124. int nildummy_send_message( device_id_t device_id, packet_t packet, services_t sender );
  125.  
  126. /** Returns the device hardware address.
  127.  *  @param device_id The device identifier. Input parameter.
  128.  *  @param address The device hardware address. Output parameter.
  129.  *  @returns EOK on success.
  130.  *  @returns EBADMEM if the address parameter is NULL.
  131.  *  @returns ENOENT if there no such device.
  132.  */
  133. int nildummy_addr_message( device_id_t device_id, measured_string_ref * address );
  134.  
  135. /*@}*/
  136.  
  137. DEVICE_MAP_IMPLEMENT( nildummy_devices, nildummy_device_t )
  138.  
  139. int nil_device_state_msg( int nil_phone, device_id_t device_id, int state ){
  140.     fibril_rwlock_read_lock( & nildummy_globals.protos_lock );
  141.     if( nildummy_globals.proto.phone ) il_device_state_msg( nildummy_globals.proto.phone, device_id, state, nildummy_globals.proto.service );
  142.     fibril_rwlock_read_unlock( & nildummy_globals.protos_lock );
  143.     return EOK;
  144. }
  145.  
  146. int nil_initialize( int net_phone ){
  147.     ERROR_DECLARE;
  148.  
  149.     fibril_rwlock_initialize( & nildummy_globals.devices_lock );
  150.     fibril_rwlock_initialize( & nildummy_globals.protos_lock );
  151.     fibril_rwlock_write_lock( & nildummy_globals.devices_lock );
  152.     fibril_rwlock_write_lock( & nildummy_globals.protos_lock );
  153.     nildummy_globals.net_phone = net_phone;
  154.     nildummy_globals.proto.phone = 0;
  155.     ERROR_PROPAGATE( nildummy_devices_initialize( & nildummy_globals.devices ));
  156.     fibril_rwlock_write_unlock( & nildummy_globals.protos_lock );
  157.     fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  158.     return EOK;
  159. }
  160.  
  161. int nildummy_device_message( device_id_t device_id, services_t service, size_t mtu ){
  162.     ERROR_DECLARE;
  163.  
  164.     nildummy_device_ref device;
  165.     int                 index;
  166.  
  167.     fibril_rwlock_write_lock( & nildummy_globals.devices_lock );
  168.     // an existing device?
  169.     device = nildummy_devices_find( & nildummy_globals.devices, device_id );
  170.     if( device ){
  171.         if( device->service != service ){
  172.             printf( "Device %d already exists\n", device->device_id );
  173.             fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  174.             return EEXIST;
  175.         }else{
  176.             // update mtu
  177.             if( mtu > 0 ){
  178.                 device->mtu = mtu;
  179.             }else{
  180.                 device->mtu = NET_DEFAULT_MTU;
  181.             }
  182.             printf( "Device %d already exists:\tMTU\t= %d\n", device->device_id, device->mtu );
  183.             fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  184.             // notify the upper layer module
  185.             fibril_rwlock_read_lock( & nildummy_globals.protos_lock );
  186.             if( nildummy_globals.proto.phone ){
  187.                 il_mtu_changed_msg( nildummy_globals.proto.phone, device->device_id, device->mtu, nildummy_globals.proto.service );
  188.             }
  189.             fibril_rwlock_read_unlock( & nildummy_globals.protos_lock );
  190.             return EOK;
  191.         }
  192.     }else{
  193.         // create a new device
  194.         device = ( nildummy_device_ref ) malloc( sizeof( nildummy_device_t ));
  195.         if( ! device ) return ENOMEM;
  196.         device->device_id = device_id;
  197.         device->service = service;
  198.         if( mtu > 0 ){
  199.             device->mtu = mtu;
  200.         }else{
  201.             device->mtu = NET_DEFAULT_MTU;
  202.         }
  203.         // bind the device driver
  204.         device->phone = netif_bind_service( device->service, device->device_id, SERVICE_ETHERNET, nildummy_receiver );
  205.         if( device->phone < 0 ){
  206.             fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  207.             free( device );
  208.             return device->phone;
  209.         }
  210.         // get hardware address
  211.         if( ERROR_OCCURRED( netif_get_addr( device->phone, device->device_id, & device->addr, & device->addr_data ))){
  212.             fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  213.             free( device );
  214.             return ERROR_CODE;
  215.         }
  216.         // add to the cache
  217.         index = nildummy_devices_add( & nildummy_globals.devices, device->device_id, device );
  218.         if( index < 0 ){
  219.             fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  220.             free( device->addr );
  221.             free( device->addr_data );
  222.             free( device );
  223.             return index;
  224.         }
  225.         printf( "New device registered:\n\tid\t= %d\n\tservice\t= %d\n\tMTU\t= %d\n", device->device_id, device->service, device->mtu );
  226.     }
  227.     fibril_rwlock_write_unlock( & nildummy_globals.devices_lock );
  228.     return EOK;
  229. }
  230.  
  231. int nildummy_addr_message( device_id_t device_id, measured_string_ref * address ){
  232.     nildummy_device_ref device;
  233.  
  234.     if( ! address ) return EBADMEM;
  235.     fibril_rwlock_read_lock( & nildummy_globals.devices_lock );
  236.     device = nildummy_devices_find( & nildummy_globals.devices, device_id );
  237.     if( ! device ){
  238.         fibril_rwlock_read_unlock( & nildummy_globals.devices_lock );
  239.         return ENOENT;
  240.     }
  241.     * address = device->addr;
  242.     fibril_rwlock_read_unlock( & nildummy_globals.devices_lock );
  243.     return ( * address ) ? EOK : ENOENT;
  244. }
  245.  
  246. int nildummy_packet_space_message( device_id_t device_id, size_t * addr_len, size_t * prefix, size_t * content, size_t * suffix ){
  247.     nildummy_device_ref device;
  248.  
  249.     if( !( addr_len && prefix && content && suffix )) return EBADMEM;
  250.     fibril_rwlock_read_lock( & nildummy_globals.devices_lock );
  251.     device = nildummy_devices_find( & nildummy_globals.devices, device_id );
  252.     if( ! device ){
  253.         fibril_rwlock_read_unlock( & nildummy_globals.devices_lock );
  254.         return ENOENT;
  255.     }
  256.     * content = device->mtu;
  257.     fibril_rwlock_read_unlock( & nildummy_globals.devices_lock );
  258.     * addr_len = 0;
  259.     * prefix = 0;
  260.     * suffix = 0;
  261.     return EOK;
  262. }
  263.  
  264. int nil_received_msg( int nil_phone, device_id_t device_id, packet_t packet, services_t target ){
  265.     packet_t        next;
  266.  
  267.     fibril_rwlock_read_lock( & nildummy_globals.protos_lock );
  268.     if( nildummy_globals.proto.phone ){
  269.         do{
  270.             next = pq_detach( packet );
  271.             il_received_msg( nildummy_globals.proto.phone, device_id, packet, nildummy_globals.proto.service );
  272.             packet = next;
  273.         }while( packet );
  274.     }
  275.     fibril_rwlock_read_unlock( & nildummy_globals.protos_lock );
  276.     return EOK;
  277. }
  278.  
  279. int nildummy_register_message( services_t service, int phone ){
  280.     fibril_rwlock_write_lock( & nildummy_globals.protos_lock );
  281.     nildummy_globals.proto.service = service;
  282.     nildummy_globals.proto.phone = phone;
  283.     printf( "New protocol registered:\n\tservice\t= %d\n\tphone\t= %d\n", nildummy_globals.proto.service, nildummy_globals.proto.phone );
  284.     fibril_rwlock_write_unlock( & nildummy_globals.protos_lock );
  285.     return EOK;
  286. }
  287.  
  288. int nildummy_send_message( device_id_t device_id, packet_t packet, services_t sender ){
  289.     nildummy_device_ref     device;
  290.  
  291.     fibril_rwlock_read_lock( & nildummy_globals.devices_lock );
  292.     device = nildummy_devices_find( & nildummy_globals.devices, device_id );
  293.     if( ! device ){
  294.         fibril_rwlock_read_unlock( & nildummy_globals.devices_lock );
  295.         return ENOENT;
  296.     }
  297.     // send packet queue
  298.     if( packet ){
  299.         netif_send_msg( device->phone, device_id, packet, SERVICE_NILDUMMY );
  300.     }
  301.     fibril_rwlock_read_unlock( & nildummy_globals.devices_lock );
  302.     return EOK;
  303. }
  304.  
  305. int nil_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count ){
  306.     ERROR_DECLARE;
  307.  
  308.     measured_string_ref address;
  309.     packet_t            packet;
  310.  
  311. //  printf( "message %d - %d\n", IPC_GET_METHOD( * call ), NET_NIL_FIRST );
  312.     * answer_count = 0;
  313.     switch( IPC_GET_METHOD( * call )){
  314.         case IPC_M_PHONE_HUNGUP:
  315.             return EOK;
  316.         case NET_NIL_DEVICE:
  317.             return nildummy_device_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), IPC_GET_MTU( call ));
  318.         case NET_NIL_SEND:
  319.             ERROR_PROPAGATE( packet_translate( nildummy_globals.net_phone, & packet, IPC_GET_PACKET( call )));
  320.             return nildummy_send_message( IPC_GET_DEVICE( call ), packet, IPC_GET_SERVICE( call ));
  321.         case NET_NIL_PACKET_SPACE:
  322.             ERROR_PROPAGATE( nildummy_packet_space_message( IPC_GET_DEVICE( call ), IPC_SET_ADDR( answer ), IPC_SET_PREFIX( answer ), IPC_SET_CONTENT( answer ), IPC_SET_SUFFIX( answer )));
  323.             * answer_count = 4;
  324.             return EOK;
  325.         case NET_NIL_ADDR:
  326.             ERROR_PROPAGATE( nildummy_addr_message( IPC_GET_DEVICE( call ), & address ));
  327.             return measured_strings_reply( address, 1 );
  328.         case IPC_M_CONNECT_TO_ME:
  329.             return nildummy_register_message( NIL_GET_PROTO( call ), IPC_GET_PHONE( call ));
  330.     }
  331.     return ENOTSUP;
  332. }
  333.  
  334. void nildummy_receiver( ipc_callid_t iid, ipc_call_t * icall ){
  335.     ERROR_DECLARE;
  336.  
  337.     packet_t        packet;
  338.  
  339.     while( true ){
  340. //      printf( "message %d - %d\n", IPC_GET_METHOD( * icall ), NET_NIL_FIRST );
  341.         switch( IPC_GET_METHOD( * icall )){
  342.             case NET_NIL_DEVICE_STATE:
  343.                 ERROR_CODE = nil_device_state_msg( 0, IPC_GET_DEVICE( icall ), IPC_GET_STATE( icall ));
  344.                 ipc_answer_0( iid, ( ipcarg_t ) ERROR_CODE );
  345.                 break;
  346.             case NET_NIL_RECEIVED:
  347.                 if( ! ERROR_OCCURRED( packet_translate( nildummy_globals.net_phone, & packet, IPC_GET_PACKET( icall )))){
  348.                     ERROR_CODE = nil_received_msg( 0, IPC_GET_DEVICE( icall ), packet, 0 );
  349.                 }
  350.                 ipc_answer_0( iid, ( ipcarg_t ) ERROR_CODE );
  351.                 break;
  352.             default:
  353.                 ipc_answer_0( iid, ( ipcarg_t ) ENOTSUP );
  354.         }
  355.         iid = async_get_call( icall );
  356.     }
  357. }
  358.  
  359. /** @}
  360.  */
  361.