WebSVN – HelenOS-historic – Diff – /kernel/trunk/arch/amd64/src/boot/boot.S

 	movl %eax, grub_eax							# save parameters from GRUB
 	movl %ebx, grub_ebx
 #ifdef CONFIG_FB
-	mov $vesa_init,%esi;
+	mov $vesa_init, %esi;
-	mov $VESA_INIT_SEGMENT<<4,%edi;
+	mov $VESA_INIT_SEGMENT << 4, %edi
-	mov $e_vesa_init-vesa_init,%ecx;
+	mov $e_vesa_init - vesa_init, %ecx
-	cld;
+	cld
-	rep movsb;
+	rep movsb
-	mov $VESA_INIT_SEGMENT<<4,%edi;
+	mov $VESA_INIT_SEGMENT << 4, %edi
-	call *%edi;
+	jmpl *%edi
+	vesa_meeting_point:
-	mov %esi,KA2PA(vesa_ph_addr);
+	mov %esi, KA2PA(vesa_ph_addr)
-	mov %di,KA2PA(vesa_height);
+	mov %di, KA2PA(vesa_height)
-	shr $16,%edi;
+	shr $16, %edi
-	mov %di,KA2PA(vesa_width);
+	mov %di, KA2PA(vesa_width)
-	mov %bx,KA2PA(vesa_scanline);
+	mov %bx, KA2PA(vesa_scanline)
-	shr $16,%ebx;
+	shr $16, %ebx
-	mov %bx,KA2PA(vesa_bpp);
+	mov %bx, KA2PA(vesa_bpp)
 #endif
 	# Protected 32-bit. We want to reuse the code-seg descriptor,
 	# the Default operand size must not be 1 when entering long mode
 	hlt
 #ifdef CONFIG_FB
 .code32
 vesa_init:
-	jmp $gdtselector(VESA_INIT_DES),$vesa_init_real-vesa_init;
+	jmp $gdtselector(VESA_INIT_DES), $vesa_init_real - vesa_init
 .code16
 vesa_init_real:
-	mov %cr0,%eax;
+	mov %cr0, %eax
-	and $~1,%eax;
+	and $~1, %eax
-	mov %eax,%cr0;
+	mov %eax, %cr0
-	jmp $VESA_INIT_SEGMENT,$vesa_init_real2-vesa_init;
+	jmp $VESA_INIT_SEGMENT, $vesa_init_real2 - vesa_init
 vesa_init_real2:
-	mov %esp,%ebp;
-	mov %ss,%cx;
-	mov $VESA_INIT_SEGMENT,%bx;
+	mov $VESA_INIT_SEGMENT, %bx
-	mov %bx,%ss;
+	mov %bx, %es
-	mov $0x0000fffc,%esp;
-	push %ds;
-	push %es;
-	push %fs;
-	push %gs;
-	push %ebp;
-	push %cx;
-	mov %bx,%ds;
+	mov %bx, %fs
-	mov %bx,%es;
+	mov %bx, %gs
-	mov %bx,%fs;
+	mov %bx, %ds
-	mov %bx,%gs;
+	mov %bx, %ss
+	movl $0x0000fffc, %esp
+    movl $0x0000fffc, %ebp
-	mov $vesa_idt-vesa_init,%ebx;
-	lidtl (%ebx);
 #define VESA_INFO_SIZE 1024
 #define VESA_MODE_LIST_PTR_OFFSET 14
 #define VESA_MODE_WIDTH_OFFSET 18
 #define VESA_MODE_HEIGHT_OFFSET 20
 #define VESA_MODE_BPP_OFFSET 25
 #define VESA_MODE_SCANLINE_OFFSET 16
 #define VESA_MODE_PHADDR_OFFSET 40
 #define VESA_END_OF_MODES 0xffff
 #define VESA_OK 0x4f
 #define VESA_GET_INFO 0x4f00
 #define VESA_GET_MODE_INFO 0x4f01
 #define VESA_SET_MODE 0x4f02
 #define CONFIG_VESA_BPP_a 255
-#if CONFIG_VESA_BPP==24
+#if CONFIG_VESA_BPP == 24
 #undef CONFIG_VESA_BPP_a
 #define CONFIG_VESA_BPP_a 32
 #endif
-	mov $VESA_GET_INFO,%ax;
+	mov $VESA_GET_INFO, %ax
-	mov $e_vesa_init-vesa_init,%di
+	mov $e_vesa_init - vesa_init, %di
-	push %di;
+	push %di
-	int $0x10;
+	int $0x10
-	pop %di;
+	pop %di
-	cmp $VESA_OK,%al;
+	cmp $VESA_OK, %al
-	jnz 0f;
+	jnz 0f
-	mov 2+VESA_MODE_LIST_PTR_OFFSET(%di),%si;
+	mov 2 + VESA_MODE_LIST_PTR_OFFSET(%di), %si
-	mov %si,%gs;
+	mov %si, %gs
-	mov VESA_MODE_LIST_PTR_OFFSET(%di),%si;
+	mov VESA_MODE_LIST_PTR_OFFSET(%di), %si
-	add $VESA_INFO_SIZE,%di;
+	add $VESA_INFO_SIZE, %di
 :# Try next mode
-	mov %gs:(%si),%cx;
+	mov %gs:(%si), %cx
-	cmp $VESA_END_OF_MODES,%cx;
+	cmp $VESA_END_OF_MODES, %cx
-	jz 0f;
+	jz 0f
-	inc %si;
+	inc %si
-	inc %si;
+	inc %si
-	push %cx;
+	push %cx
-	push %di;
+	push %di
-	push %si;
+	push %si
-	mov $VESA_GET_MODE_INFO,%ax;
+	mov $VESA_GET_MODE_INFO, %ax
-	int $0x10;
+	int $0x10
-	pop %si;
+	pop %si
-	pop %di;
+	pop %di
-	pop %cx;
+	pop %cx
-	cmp $VESA_OK,%al;
+	cmp $VESA_OK, %al
-	jnz 0f;
+	jnz 0f
-	mov $CONFIG_VESA_WIDTH,%ax;
+	mov $CONFIG_VESA_WIDTH, %ax
-	cmp VESA_MODE_WIDTH_OFFSET(%di),%ax;
+	cmp VESA_MODE_WIDTH_OFFSET(%di), %ax
-	jnz 1b;
+	jnz 1b
-	mov $CONFIG_VESA_HEIGHT,%ax;
+	mov $CONFIG_VESA_HEIGHT, %ax
-	cmp VESA_MODE_HEIGHT_OFFSET(%di),%ax;
+	cmp VESA_MODE_HEIGHT_OFFSET(%di), %ax
-	jnz 1b;
+	jnz 1b
-	mov $CONFIG_VESA_BPP,%al;
+	mov $CONFIG_VESA_BPP, %al
-	cmp VESA_MODE_BPP_OFFSET(%di),%al;
+	cmp VESA_MODE_BPP_OFFSET(%di), %al
-	jz 2f;
+	jz 2f
-	mov $CONFIG_VESA_BPP_a,%al;
+	mov $CONFIG_VESA_BPP_a, %al
-	cmp VESA_MODE_BPP_OFFSET(%di),%al;
+	cmp VESA_MODE_BPP_OFFSET(%di), %al
-	jnz 1b;
+	jnz 1b
 :
-	mov %cx,%bx;
-	or $0xC000,%bx;
-	push %di;
-	mov $VESA_SET_MODE,%ax;
-	int $0x10;
-	pop %di;
-	cmp $VESA_OK,%al;
-	jnz 0f;
-	mov VESA_MODE_PHADDR_OFFSET(%di),%esi;
-	mov VESA_MODE_WIDTH_OFFSET(%di),%ax;
-	shl $16,%eax;
-	mov VESA_MODE_HEIGHT_OFFSET(%di),%ax;
-	mov VESA_MODE_BPP_OFFSET(%di),%bl;
-	xor %bh,%bh;
-	shl $16,%ebx;
-	mov VESA_MODE_SCANLINE_OFFSET(%di),%bx;
-	mov %eax,%edi;
+	mov %cx, %bx
+	or $0xc000, %bx
+	push %di
+	mov $VESA_SET_MODE, %ax
+	int $0x10
+	pop %di
+	cmp $VESA_OK, %al
+	jnz 0f
+	mov VESA_MODE_PHADDR_OFFSET(%di), %esi
+	mov VESA_MODE_WIDTH_OFFSET(%di), %ax
+	shl $16, %eax
+	mov VESA_MODE_HEIGHT_OFFSET(%di), %ax
+	mov VESA_MODE_BPP_OFFSET(%di), %bl
+	xor %bh, %bh
+	shl $16, %ebx
+	mov VESA_MODE_SCANLINE_OFFSET(%di), %bx
+	mov %eax, %edi
+:
+	mov %cr0, %eax
+	or $1, %eax
+	mov %eax, %cr0
-:
-	mov %cr0,%eax;
-	or $1,%eax;
-	mov %eax,%cr0;
-	jmp 9f;
+	jmp 9f
 :
-	pop %cx;
-	pop %ebp;
-	pop %gs;
-	pop %fs;
-	pop %es;
-	pop %ds;
-	mov %cx,%ss;
-	mov %ebp,%esp;
-	ljmpl $gdtselector(KTEXT32_DES),$(vesa_init_protect-vesa_init+VESA_INIT_SEGMENT<<4);
+	ljmpl $gdtselector(KTEXT32_DES), $(vesa_init_protect - vesa_init + VESA_INIT_SEGMENT << 4)
-:#Error no Prefered mode found
+:# No prefered mode found
-  mov $0x111,%cx;
+	mov $0x111, %cx
-  push %di;
+	push %di
-  push %cx;
+	push %cx
-  mov $VESA_GET_MODE_INFO,%ax;
+	mov $VESA_GET_MODE_INFO, %ax
-  int $0x10;
+	int $0x10
-  pop %cx;
+	pop %cx
-  pop %di;
+	pop %di
-  cmp $VESA_OK,%al;
+	cmp $VESA_OK, %al
-  jnz 1f;
+	jnz 1f
-  jz 2b;    /* Force relative jump */
+	jz 2b						# Force relative jump
+:
-:mov $0x0003,%ax;
+	mov $0x0003, %ax
-  int $0x10;
+	int $0x10
-  mov $0xffffffff,%edi; /* EGA text mode used, because of problems with VESA */
+	mov $0xffffffff, %edi		# EGA text mode used, because of problems with VESA
-  xor %ax,%ax
+	xor %ax, %ax
-  jz 8b;    /* Force relative jump */
+	jz 8b						# Force relative jump
-vesa_init_protect:
 .code32
-	ret;
+vesa_init_protect:
+	movw $gdtselector(KDATA_DES), %cx
+	movw %cx, %es
+	movw %cx, %ds							# kernel data + stack
+	movw %cx, %ss
+	# Simics seems to remove hidden part of GS on entering user mode
+	#  when _visible_ part of GS does not point to user-mode segment
+	movw $gdtselector(UDATA_DES), %cx
+	movw %cx, %fs
+	movw %cx, %gs
+	jmpl $gdtselector(KTEXT32_DES), $vesa_meeting_point
-vesa_idt:
-.word 0x03ff
-.long 0
 .align 4
 e_vesa_init:
 #endif
 .section K_DATA_START, "aw", @progbits
 .align 4096
 # Identical mapping of first 64MB and the same of -2GB -> 0

Subversion Repositories HelenOS-historic

(root)/kernel/trunk/arch/amd64/src/boot/boot.S – Rev 1291 → 1641