WebSVN – HelenOS – Diff – //branches/tracing/uspace/app/debug/arch/mips32/src/mips32.c

 #include "../../../cons.h"
 #include "../../../main.h"
 #include "../../../breakpoint.h"
 #include "../../../include/arch.h"
+#include "../../../genarch/idec/idec.h"
 #define OPCODE_BREAK        0x0000000d
 static istate_t istate;
     bstore_initialize(&dt->arch.next[1]);
+}
 int arch_breakpoint_set(breakpoint_t *b)
+{
-    bstore_initialize(&b->arch.bs);
-    bstore_initialize(&b->arch.next_bs[0]);
-    bstore_initialize(&b->arch.next_bs[1]);
+    return idec_breakpoint_set(b);
-    return bstore_push(&b->arch.bs, b->addr, OPCODE_BREAK);
+}
 int arch_breakpoint_remove(breakpoint_t *b)
+{
-    return bstore_pop(&b->arch.bs);
+    return idec_breakpoint_remove(b);
+}
 static int islot_read(uintptr_t addr, uint32_t *instr)
+{
     int rc;
+    }
     return -1;
+}
-static int get_reg(int reg_no, uint32_t *value)
+static int get_reg(dthread_t *dt, int reg_no, uint32_t *value)
+{
+    int rc;
     cons_printf("get_reg...\n");
     if (reg_no == 0) {
         *value = 0;
         return 0;
+    }
+    rc = udebug_regs_read(app_phone, dt->hash, &istate);
+    if (rc < 0) return rc;
     /* FIXME: ugly */
     *value = ((uint32_t *)&istate)[reg_no - 1];
     printf("get_reg ok (0x%08x)\n", *value);
     return 0;
 /** Get address of the instruction that will be executed after the current one.
+ *
  * Assumptions: addr == PC, *addr is not covered by a BREAK.
+ *
+ * @param dt        Dthread on which to operate.
  * @param addr      Address of an instruction.
  * @param buffer    Buffer for storing up to 2 addresses.
  * @return      Number of stored addresses or negative error code.
  */
-static int get_next_addr(uintptr_t addr, uintptr_t *buffer)
+int get_next_addr(dthread_t *dt, uintptr_t addr, uintptr_t *buffer)
+{
     /* TODO: J[AL]R, branches and delay slots */
     uint32_t instr;
     int32_t offset;
     op_t op;
         n = 1;
         break;
     case OP_JR:
     case OP_JALR:
         /* Register jump */
-        rc = get_reg((instr >> 21) & 0x1f, &buffer[0]);
+        rc = get_reg(dt, (instr >> 21) & 0x1f, &buffer[0]);
         n = 1;
         break;
     default:
         /* Regular instruction */
         buffer[0] = addr + 4;
+    }
     return n;
+}
-static void _ev_breakpoint(thash_t thread_hash)
-{
-    breakpoint_t *b;
-    dthread_t *dt;
-    int rc, n_next, i;
-    uint32_t epc;
-    uintptr_t brk_addr;
-    uintptr_t next_addr[2];
-    uint32_t brkp;
-    brkp = OPCODE_BREAK;
-    cons_printf("arch_event_breakpoint\n");
-    rc = udebug_regs_read(app_phone, thread_hash, &istate);
-    cons_printf("udebug_regs_read -> %d\n", rc);
-    epc = istate_get_pc(&istate);
-    cons_printf("EPC was 0x%08x\n", epc);
-    brk_addr = epc;
-    dt = dthread_get();
-    if (active_bkpt != NULL) {
-        assert(active_bkpt->arch.bs.address == brk_addr);
-        b = active_bkpt;
-        /* A breakpoint-restoring BRK has been hit */
-        cons_printf("restoring breakpoint %d\n", b->id);
-        for (i = 0; i < b->arch.n_next; ++i) {
-            rc = bstore_pop(&b->arch.next_bs[i]);
-            if (rc != 0) return;
-        }
-        rc = bstore_push(&b->arch.bs, b->addr, OPCODE_BREAK);
-        if (rc != 0) return;
-        active_bkpt = NULL;
-        return;
-    }
-    b = breakpoint_find_by_addr(brk_addr);
-    if (b == NULL) {
-        cons_printf("Unrecognized breakpoint at 0x%lx\n", brk_addr);
-    }
-    /* A breakpoint has been hit */
-    cons_printf("breakpoint_hit...\n");
-    breakpoint_hit(b);
-    /* While in breakpoint_hit(), singlestep was activated */
-    if (dt->arch.singlestep) return;
-    cons_printf("move breakpoint\b");
-    rc = bstore_pop(&b->arch.bs);
-    if (rc != 0) return;
-    n_next = get_next_addr(brk_addr, next_addr);
-    if (n_next < 0) return;
-    /*
-     * There could be another breakpoint at next_addr,
-     * but that's okay. We'll pop the active breakpoint bs
-     * before doing anything else.
-     */
-    for (i = 0; i < n_next; ++i) {
-        rc = bstore_push(&b->arch.next_bs[i], next_addr[i],
-            OPCODE_BREAK);
-        if (rc != 0) return;
-    }
-    b->arch.n_next = n_next;
-    active_bkpt = b;
-    b->active = true;
-    cons_printf("end_hit...\n");
-}
-static void _ev_singlestep(thash_t thread_hash)
-{
-    dthread_t *dt;
-    int rc, i;
-    uint32_t epc;
-    int brk_addr;
-    uint32_t brkp;
-    dt = dthread_get();
-    assert(active_bkpt == NULL);
-    assert(dt->arch.singlestep);
-    brkp = OPCODE_BREAK;
-    cons_printf("arch_event_breakpoint\n");
-    rc = udebug_regs_read(app_phone, thread_hash, &istate);
-    cons_printf("udebug_regs_read -> %d\n", rc);
-    epc = istate_get_pc(&istate);
-    cons_printf("EPC was 0x%08x\n", epc);
-    brk_addr = epc;
-    if (dt->arch.cur.valid) {
-        cons_printf("restore breakpoint BREAK\n");
-        rc = bstore_pop(&dt->arch.cur);
-    }
-    cons_printf("\nclear singlestep BREAKs\n");
-    for (i = 0; i < dt->arch.n_next; ++i) {
-        rc = bstore_pop(&dt->arch.next[i]);
-        if (rc != 0) return;
-    }
-    dt->arch.singlestep = false;
-    singlestep_hit();
-}
 void arch_event_breakpoint(thash_t thread_hash)
+{
-    dthread_t *dt;
-    dt = dthread_get();
-    if (dt->arch.singlestep) {
-        _ev_singlestep(thread_hash);
-    } else {
-        _ev_breakpoint(thread_hash);
+    idec_event_breakpoint(thread_hash);
-    }
+}
 void arch_event_trap(dthread_t *dt)
+{
     /* Unused */
     /* TODO */
+}
 void arch_singlestep(dthread_t *dt)
+{
-    int rc, i;
-    uint32_t epc;
-    breakpoint_t *b;
-    uint32_t old_instr;
-    uintptr_t next_addr[2];
-    int n_next;
-    assert(active_bkpt == NULL);
-    assert(dt->arch.singlestep == false);
-    cons_printf("arch_singlestep(dt)\n");
-    rc = udebug_regs_read(app_phone, dt->hash, &istate);
-    cons_printf("udebug_regs_read -> %d\n", rc);
-    epc = istate_get_pc(&istate);
-    cons_printf("EPC was 0x%08x\n", epc);
-    cons_printf("initial set singlestep\n");
-    b = breakpoint_find_by_addr(epc);
-    if (b != NULL) {
-        /* Cover breakpoint with old instruction */
-        old_instr = b->arch.bs.value;
-        rc = bstore_push(&dt->arch.cur, epc, old_instr);
-        if (rc < 0) return;
-    }
-    n_next = get_next_addr(epc, next_addr);
-    if (n_next < 0) return;
-    /* Cover next instruction(s) with BREAK */
-    for (i = 0; i < n_next; ++i) {
-        rc = bstore_push(&dt->arch.next[i], next_addr[i], OPCODE_BREAK);
-        if (rc != 0) return;
-    }
-    dt->arch.n_next = n_next;
-    dt->arch.singlestep = true;
+    idec_singlestep(dt);
-    dthread_resume(dt);
+}
 /** @}
  */

Subversion Repositories HelenOS

(root)//branches/tracing/uspace/app/debug/arch/mips32/src/mips32.c – Rev 3100 → 3108