WebSVN – HelenOS – Diff – //branches/dd/kernel/arch/sparc64/src/drivers/sgcn.c

 /**
  * @file
  * @brief   SGCN driver.
  */
+#include <arch.h>
 #include <arch/drivers/sgcn.h>
 #include <arch/drivers/kbd.h>
 #include <genarch/ofw/ofw_tree.h>
 #include <debug.h>
 #include <string.h>
 #include <print.h>
 #include <mm/page.h>
-#include <ipc/irq.h>
+#include <proc/thread.h>
-#include <ddi/ddi.h>
-#include <ddi/device.h>
 #include <console/chardev.h>
 #include <console/console.h>
-#include <ddi/device.h>
 #include <sysinfo/sysinfo.h>
 #include <synch/spinlock.h>
+#define POLL_INTERVAL       10000
 /*
  * Physical address at which the SBBC starts. This value has been obtained
  * by inspecting (using Simics) memory accesses made by OBP. It is valid
  * for the Simics-simulated Serengeti machine. The author of this code is
  * not sure whether this value is valid generally.
  * Key into the SRAM table of contents which identifies the entry
  * describing the OBP console buffer. It is worth mentioning
  * that the OBP console buffer is not the only console buffer
  * which can be used. It is, however, used because when the kernel
  * is running, the OBP buffer is not used by OBP any more but OBP
- * has already made neccessary arangements so that the output will
+ * has already made necessary arrangements so that the output will
  * be read from the OBP buffer and input will go to the OBP buffer.
  * Therefore HelenOS needs to make no such arrangements any more.
  */
 #define CONSOLE_KEY     "OBPCONS"
 /* magic string contained at the beginning of the console buffer */
 #define SGCN_BUFFER_MAGIC   "CON"
-/**
- * The driver is polling based, but in order to notify the userspace
- * of a key being pressed, we need to supply the interface with some
- * interrupt number. The interrupt number can be arbitrary as it it
- * will never be used for identifying HW interrupts, but only in
- * notifying the userspace.
- */
-#define FICTIONAL_INR       1
 /*
  * Returns a pointer to the object of a given type which is placed at the given
  * offset from the SRAM beginning.
  */
 #define SRAM(type, offset)  ((type *) (sram_begin + (offset)))
 /*
  * Returns a pointer to the object of a given type which is placed at the given
  * offset from the console buffer beginning.
  */
 #define SGCN_BUFFER(type, offset) \
-                ((type *) (sgcn_buffer_begin + (offset)))
+    ((type *) (sgcn_buffer_begin + (offset)))
 /** Returns a pointer to the console buffer header. */
 #define SGCN_BUFFER_HEADER  (SGCN_BUFFER(sgcn_buffer_header_t, 0))
 /** defined in drivers/kbd.c */
  * starting address of the SGCN buffer, will be set by the
  * init_sgcn_buffer_begin function
  */
 static uintptr_t sgcn_buffer_begin;
-/**
- * SGCN IRQ structure. So far used only for notifying the userspace of the
+/* true iff the kernel driver should ignore pressed keys */
- * key being pressed, not for kernel being informed about keyboard interrupts.
- */
-static irq_t sgcn_irq;
+static bool kbd_disabled;
-// TODO think of a way how to synchronize accesses to SGCN buffer between the kernel and the userspace
 /*
  * Ensures that writing to the buffer and consequent update of the write pointer
  * are together one atomic operation.
  */
  */
 SPINLOCK_INITIALIZE(sgcn_input_lock);
 /* functions referenced from definitions of I/O operations structures */
-static void sgcn_noop(chardev_t *);
-static void sgcn_putchar(chardev_t *, const char, bool);
+static void sgcn_putchar(outdev_t *, const char, bool);
-static char sgcn_key_read(chardev_t *);
-/** character device operations */
+/** SGCN output device operations */
-static chardev_operations_t sgcn_ops = {
+static outdev_operations_t sgcnout_ops = {
-    .suspend = sgcn_noop,
-    .resume = sgcn_noop,
-    .read = sgcn_key_read,
     .write = sgcn_putchar
 };
-/** SGCN character device */
+/** SGCN input device operations */
-chardev_t sgcn_io;
+static indev_operations_t sgcnin_ops = {
+    .poll = NULL
+};
+static indev_t sgcnin;      /**< SGCN input device. */
+static outdev_t sgcnout;    /**< SGCN output device. */
 /**
  * Set some sysinfo values (SRAM address and SRAM size).
  */
 static void register_sram(uintptr_t sram_begin_physical)
+{
     sysinfo_set_item_val("sram.area.size", NULL, MAPPED_AREA_SIZE);
     sysinfo_set_item_val("sram.address.physical", NULL,
         sram_begin_physical);
+}
 /**
  * Initializes the starting address of SRAM.
+ *
  * The SRAM starts 0x900000 + C bytes behind the SBBC start in the
  * physical memory, where C is the value read from the "iosram-toc"
  * property of the "/chosen" OBP node. The sram_begin variable will
  * be set to the virtual address which maps to the SRAM physical
  * address.
- *
- * It also registers the physical area of SRAM and sets some sysinfo
- * values (SRAM address and SRAM size).
  */
 static void init_sram_begin(void)
+{
     ofw_tree_node_t *chosen;
     ofw_tree_property_t *iosram_toc;
         panic("Cannot find property 'iosram-toc'.");
     if (!iosram_toc->value)
         panic("Cannot find SRAM TOC.");
     sram_begin_physical = SBBC_START + SBBC_SRAM_OFFSET
         + *((uint32_t *) iosram_toc->value);
     sram_begin = hw_map(sram_begin_physical, MAPPED_AREA_SIZE);
     register_sram(sram_begin_physical);
+}
  * This function also writes the offset of the SGCN buffer within SRAM
  * under the sram.buffer.offset sysinfo key.
  */
 static void sgcn_buffer_begin_init(void)
+{
+    static bool initialized;
+    if (initialized)
+        return;
     init_sram_begin();
     ASSERT(strcmp(SRAM_TOC->magic, SRAM_TOC_MAGIC) == 0);
     /* lookup TOC entry with the correct key */
     ASSERT(i < MAX_TOC_ENTRIES);
     sgcn_buffer_begin = sram_begin + SRAM_TOC->keys[i].offset;
     sysinfo_set_item_val("sram.buffer.offset", NULL,
         SRAM_TOC->keys[i].offset);
-}
-/**
- * Default suspend/resume operation for the input device.
- */
-static void sgcn_noop(chardev_t *d)
+    initialized = true;
-{
+}
 /**
  * Writes a single character to the SGCN (circular) output buffer
  * and updates the output write pointer so that SGCN gets to know
     uint32_t end = SGCN_BUFFER_HEADER->out_end;
     uint32_t size = end - begin;
     /* we need pointers to volatile variables */
     volatile char *buf_ptr = (volatile char *)
         SGCN_BUFFER(char, SGCN_BUFFER_HEADER->out_wrptr);
     volatile uint32_t *out_wrptr_ptr = &(SGCN_BUFFER_HEADER->out_wrptr);
     volatile uint32_t *out_rdptr_ptr = &(SGCN_BUFFER_HEADER->out_rdptr);
     /*
      * Write the character and increment the write pointer modulo the
 /**
  * SGCN output operation. Prints a single character to the SGCN. If the line
  * feed character is written ('\n'), the carriage return character ('\r') is
  * written straight away.
  */
-static void sgcn_putchar(struct chardev * cd, const char c, bool silent)
+static void sgcn_putchar(outdev_t *od, const char c, bool silent)
+{
     if (!silent) {
         spinlock_lock(&sgcn_output_lock);
         sgcn_do_putchar(c);
         spinlock_unlock(&sgcn_output_lock);
+    }
+}
 /**
- * Called when actively reading the character. Not implemented yet.
- */
-static char sgcn_key_read(chardev_t *d)
-{
-    return (char) 0;
-}
-/**
- * The driver works in polled mode, so no interrupt should be handled by it.
- */
-static irq_ownership_t sgcn_claim(irq_t *irq)
-{
-    return IRQ_DECLINE;
-}
-/**
- * The driver works in polled mode, so no interrupt should be handled by it.
- */
-static void sgcn_irq_handler(irq_t *irq)
-{
-    panic("Not yet implemented, SGCN works in polled mode.");
-}
-/**
  * Grabs the input for kernel.
  */
 void sgcn_grab(void)
+{
-    ipl_t ipl = interrupts_disable();
-    volatile uint32_t *in_wrptr_ptr = &(SGCN_BUFFER_HEADER->in_wrptr);
-    volatile uint32_t *in_rdptr_ptr = &(SGCN_BUFFER_HEADER->in_rdptr);
-    /* skip all the user typed before the grab and hasn't been processed */
-    spinlock_lock(&sgcn_input_lock);
-    *in_rdptr_ptr = *in_wrptr_ptr;
+    kbd_disabled = true;
-    spinlock_unlock(&sgcn_input_lock);
-    spinlock_lock(&sgcn_irq.lock);
-    sgcn_irq.notif_cfg.notify = false;
-    spinlock_unlock(&sgcn_irq.lock);
-    interrupts_restore(ipl);
+}
 /**
  * Releases the input so that userspace can use it.
  */
 void sgcn_release(void)
+{
-    ipl_t ipl = interrupts_disable();
-    spinlock_lock(&sgcn_irq.lock);
-    if (sgcn_irq.notif_cfg.answerbox)
-        sgcn_irq.notif_cfg.notify = true;
+    kbd_disabled = true;
-    spinlock_unlock(&sgcn_irq.lock);
-    interrupts_restore(ipl);
+}
 /**
  * Function regularly called by the keyboard polling thread. Finds out whether
  * there are some unread characters in the input queue. If so, it picks them up
  * and sends them to the upper layers of HelenOS.
  */
-void sgcn_poll(void)
+static void sgcn_poll()
+{
     uint32_t begin = SGCN_BUFFER_HEADER->in_begin;
     uint32_t end = SGCN_BUFFER_HEADER->in_end;
     uint32_t size = end - begin;
+    if (kbd_disabled)
+        return;
     spinlock_lock(&sgcn_input_lock);
-    ipl_t ipl = interrupts_disable();
-    spinlock_lock(&sgcn_irq.lock);
     /* we need pointers to volatile variables */
     volatile char *buf_ptr = (volatile char *)
         SGCN_BUFFER(char, SGCN_BUFFER_HEADER->in_rdptr);
     volatile uint32_t *in_wrptr_ptr = &(SGCN_BUFFER_HEADER->in_wrptr);
     volatile uint32_t *in_rdptr_ptr = &(SGCN_BUFFER_HEADER->in_rdptr);
-    if (*in_rdptr_ptr != *in_wrptr_ptr) {
-        /* XXX: send notification to userspace */
-    }
-    spinlock_unlock(&sgcn_irq.lock);
-    interrupts_restore(ipl);
     while (*in_rdptr_ptr != *in_wrptr_ptr) {
         buf_ptr = (volatile char *)
             SGCN_BUFFER(char, SGCN_BUFFER_HEADER->in_rdptr);
         char c = *buf_ptr;
         *in_rdptr_ptr = (((*in_rdptr_ptr) - begin + 1) % size) + begin;
-        if (c == '\r') {
-            c = '\n';
-        }
-        chardev_push_character(&sgcn_io, c);
+        indev_push_character(&sgcnin, c);
+    }
     spinlock_unlock(&sgcn_input_lock);
+}
 /**
- * A public function which initializes I/O from/to Serengeti console
- * and sets it as a default input/output.
+ * Polling thread function.
  */
+static void kkbdpoll(void *arg) {
+    while (1) {
+        if (!silent) {
+            sgcn_poll();
+        }
+        thread_usleep(POLL_INTERVAL);
+    }
+}
+/**
+ * A public function which initializes input from the Serengeti console.
+ */
-void sgcn_init(void)
+indev_t *sgcnin_init(void)
+{
     sgcn_buffer_begin_init();
     kbd_type = KBD_SGCN;
-    devno_t devno = device_assign_devno();
-    irq_initialize(&sgcn_irq);
-    sgcn_irq.devno = devno;
-    sgcn_irq.inr = FICTIONAL_INR;
-    sgcn_irq.claim = sgcn_claim;
-    sgcn_irq.handler = sgcn_irq_handler;
-    irq_register(&sgcn_irq);
     sysinfo_set_item_val("kbd", NULL, true);
     sysinfo_set_item_val("kbd.type", NULL, KBD_SGCN);
-    sysinfo_set_item_val("kbd.devno", NULL, devno);
+    thread_t *t = thread_create(kkbdpoll, NULL, TASK, 0, "kkbdpoll", true);
+    if (!t)
-    sysinfo_set_item_val("kbd.inr", NULL, FICTIONAL_INR);
+        panic("Cannot create kkbdpoll.");
-    sysinfo_set_item_val("fb.kind", NULL, 4);
+    thread_ready(t);
-    chardev_initialize("sgcn_io", &sgcn_io, &sgcn_ops);
+    indev_initialize("sgcnin", &sgcnin, &sgcnin_ops);
-    stdin = &sgcn_io;
+    return &sgcnin;
+}
+/**
+ * A public function which initializes output to the Serengeti console.
+ */
+void sgcnout_init(void)
+{
+    sgcn_buffer_begin_init();
+    sysinfo_set_item_val("fb.kind", NULL, 4);
+    outdev_initialize("sgcnout", &sgcnout, &sgcnout_ops);
-    stdout = &sgcn_io;
+    stdout = &sgcnout;
+}
 /** @}
  */

Subversion Repositories HelenOS

(root)//branches/dd/kernel/arch/sparc64/src/drivers/sgcn.c – Rev 4055 → 4156