WebSVN – HelenOS – Blame – //branches/sparc/kernel/generic/src/mm/frame.c

Rev	Author	Line No.	Line
1	jermar	1	/*
2071	jermar	2	* Copyright (c) 2001-2005 Jakub Jermar
		3	* Copyright (c) 2005 Sergey Bondari
1	jermar	4	* All rights reserved.
		5	*
		6	* Redistribution and use in source and binary forms, with or without
		7	* modification, are permitted provided that the following conditions
		8	* are met:
		9	*
		10	* - Redistributions of source code must retain the above copyright
		11	* notice, this list of conditions and the following disclaimer.
		12	* - Redistributions in binary form must reproduce the above copyright
		13	* notice, this list of conditions and the following disclaimer in the
		14	* documentation and/or other materials provided with the distribution.
		15	* - The name of the author may not be used to endorse or promote products
		16	* derived from this software without specific prior written permission.
		17	*
		18	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
		19	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
		20	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
		21	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
		22	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
		23	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
		24	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
		25	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		26	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
		27	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		28	*/
		29
1757	jermar	30	/** @addtogroup genericmm
1702	cejka	31	* @{
		32	*/
		33
1248	jermar	34	/**
1702	cejka	35	* @file
1248	jermar	36	* @brief Physical frame allocator.
		37	*
		38	* This file contains the physical frame allocator and memory zone management.
		39	* The frame allocator is built on top of the buddy allocator.
		40	*
		41	* @see buddy.c
		42	*/
		43
814	palkovsky	44	/*
		45	* Locking order
		46	*
		47	* In order to access particular zone, the process must first lock
		48	* the zones.lock, then lock the zone and then unlock the zones.lock.
		49	* This insures, that we can fiddle with the zones in runtime without
		50	* affecting the processes.
		51	*
		52	*/
		53
1	jermar	54	#include <arch/types.h>
		55	#include <mm/frame.h>
703	jermar	56	#include <mm/as.h>
1	jermar	57	#include <panic.h>
367	jermar	58	#include <debug.h>
788	jermar	59	#include <adt/list.h>
1	jermar	60	#include <synch/spinlock.h>
3187	jermar	61	#include <synch/mutex.h>
		62	#include <synch/condvar.h>
115	jermar	63	#include <arch/asm.h>
195	vana	64	#include <arch.h>
533	bondari	65	#include <print.h>
536	bondari	66	#include <align.h>
814	palkovsky	67	#include <mm/slab.h>
822	palkovsky	68	#include <bitops.h>
1063	palkovsky	69	#include <macros.h>
2128	jermar	70	#include <config.h>
115	jermar	71
814	palkovsky	72	typedef struct {
		73	count_t refcount; /*< tracking of shared frames /
1780	jermar	74	uint8_t buddy_order; /*< buddy system block order /
2133	jermar	75	link_t buddy_link; /**< link to the next free block inside one
		76	order */
814	palkovsky	77	void parent; /< If allocated by slab, this points there /
1236	jermar	78	} frame_t;
367	jermar	79
814	palkovsky	80	typedef struct {
		81	SPINLOCK_DECLARE(lock); /*< this lock protects everything below /
2133	jermar	82	pfn_t base; /**< frame_no of the first frame in the frames
		83	array */
820	jermar	84	count_t count; /*< Size of zone /
533	bondari	85
2133	jermar	86	frame_t frames; /*< array of frame_t structures in this
		87	zone */
814	palkovsky	88	count_t free_count; /*< number of free frame_t structures /
		89	count_t busy_count; /*< number of busy frame_t structures /
		90
2059	jermar	91	buddy_system_t buddy_system; /< buddy system for the zone /
814	palkovsky	92	int flags;
1236	jermar	93	} zone_t;
479	bondari	94
814	palkovsky	95	/*
		96	* The zoneinfo.lock must be locked when accessing zoneinfo structure.
		97	* Some of the attributes in zone_t structures are 'read-only'
368	jermar	98	*/
1	jermar	99
2121	decky	100	typedef struct {
814	palkovsky	101	SPINLOCK_DECLARE(lock);
2122	decky	102	unsigned int count;
814	palkovsky	103	zone_t *info[ZONES_MAX];
2121	decky	104	} zones_t;
1	jermar	105
2121	decky	106	static zones_t zones;
814	palkovsky	107
3187	jermar	108	/*
		109	* Synchronization primitives used to sleep when there is no memory
		110	* available.
		111	*/
3188	jermar	112	mutex_t mem_avail_mtx;
		113	condvar_t mem_avail_cv;
		114	unsigned long mem_avail_frames = 0; /*< Number of available frames. /
		115	unsigned long mem_avail_gen = 0; /*< Generation counter. /
2121	decky	116
2725	decky	117	/********************/
814	palkovsky	118	/* Helper functions */
2725	decky	119	/********************/
		120
814	palkovsky	121	static inline index_t frame_index(zone_t zone, frame_t frame)
762	palkovsky	122	{
2725	decky	123	return (index_t) (frame - zone->frames);
762	palkovsky	124	}
2725	decky	125
814	palkovsky	126	static inline index_t frame_index_abs(zone_t zone, frame_t frame)
1	jermar	127	{
2725	decky	128	return (index_t) (frame - zone->frames) + zone->base;
1	jermar	129	}
2725	decky	130
814	palkovsky	131	static inline int frame_index_valid(zone_t *zone, index_t index)
		132	{
2745	decky	133	return (index < zone->count);
814	palkovsky	134	}
1	jermar	135
814	palkovsky	136	/** Compute pfn_t from frame_t pointer & zone pointer */
820	jermar	137	static index_t make_frame_index(zone_t zone, frame_t frame)
762	palkovsky	138	{
2725	decky	139	return (frame - zone->frames);
762	palkovsky	140	}
		141
3185	jermar	142	/** Initialize frame structure.
762	palkovsky	143	*
3188	jermar	144	* @param frame Frame structure to be initialized.
762	palkovsky	145	*/
814	palkovsky	146	static void frame_initialize(frame_t *frame)
762	palkovsky	147	{
814	palkovsky	148	frame->refcount = 1;
		149	frame->buddy_order = 0;
762	palkovsky	150	}
		151
2725	decky	152	/**********************/
814	palkovsky	153	/* Zoneinfo functions */
2725	decky	154	/**********************/
762	palkovsky	155
3185	jermar	156	/** Insert-sort zone into zones list.
822	palkovsky	157	*
3185	jermar	158	* @param newzone New zone to be inserted into zone list.
		159	* @return Zone number on success, -1 on error.
1	jermar	160	*/
822	palkovsky	161	static int zones_add_zone(zone_t *newzone)
1	jermar	162	{
2122	decky	163	unsigned int i, j;
822	palkovsky	164	ipl_t ipl;
		165	zone_t *z;
762	palkovsky	166
822	palkovsky	167	ipl = interrupts_disable();
814	palkovsky	168	spinlock_lock(&zones.lock);
2725	decky	169
814	palkovsky	170	/* Try to merge */
2725	decky	171	if (zones.count + 1 == ZONES_MAX) {
		172	printf("Maximum zone count %u exceeded!\n", ZONES_MAX);
		173	spinlock_unlock(&zones.lock);
		174	interrupts_restore(ipl);
		175	return -1;
		176	}
		177
1037	decky	178	for (i = 0; i < zones.count; i++) {
822	palkovsky	179	/* Check for overflow */
852	palkovsky	180	z = zones.info[i];
3185	jermar	181	if (overlaps(newzone->base, newzone->count, z->base,
		182	z->count)) {
822	palkovsky	183	printf("Zones overlap!\n");
		184	return -1;
814	palkovsky	185	}
852	palkovsky	186	if (newzone->base < z->base)
822	palkovsky	187	break;
368	jermar	188	}
2725	decky	189
822	palkovsky	190	/* Move other zones up */
2133	jermar	191	for (j = i; j < zones.count; j++)
1037	decky	192	zones.info[j + 1] = zones.info[j];
2725	decky	193
822	palkovsky	194	zones.info[i] = newzone;
		195	zones.count++;
2725	decky	196
814	palkovsky	197	spinlock_unlock(&zones.lock);
822	palkovsky	198	interrupts_restore(ipl);
		199
		200	return i;
1	jermar	201	}
		202
3207	jermar	203	/** Try to find a zone where can we find the frame.
2725	decky	204	*
2059	jermar	205	* Assume interrupts are disabled.
2725	decky	206	*
3185	jermar	207	* @param frame Frame number contained in zone.
		208	* @param pzone If not null, it is used as zone hint. Zone index is
		209	* filled into the variable on success.
		210	* @return Pointer to locked zone containing frame.
368	jermar	211	*/
3185	jermar	212	static zone_t find_zone_and_lock(pfn_t frame, unsigned int pzone)
1	jermar	213	{
2122	decky	214	unsigned int i;
		215	unsigned int hint = pzone ? *pzone : 0;
814	palkovsky	216	zone_t *z;
533	bondari	217
814	palkovsky	218	spinlock_lock(&zones.lock);
		219
2745	decky	220	if (hint >= zones.count)
814	palkovsky	221	hint = 0;
533	bondari	222
814	palkovsky	223	i = hint;
		224	do {
		225	z = zones.info[i];
		226	spinlock_lock(&z->lock);
		227	if (z->base <= frame && z->base + z->count > frame) {
2133	jermar	228	/* Unlock the global lock */
		229	spinlock_unlock(&zones.lock);
814	palkovsky	230	if (pzone)
		231	*pzone = i;
		232	return z;
533	bondari	233	}
814	palkovsky	234	spinlock_unlock(&z->lock);
533	bondari	235
814	palkovsky	236	i++;
		237	if (i >= zones.count)
		238	i = 0;
3207	jermar	239	} while (i != hint);
814	palkovsky	240
		241	spinlock_unlock(&zones.lock);
		242	return NULL;
533	bondari	243	}
		244
822	palkovsky	245	/** @return True if zone can allocate specified order */
1780	jermar	246	static int zone_can_alloc(zone_t *z, uint8_t order)
822	palkovsky	247	{
		248	return buddy_system_can_alloc(z->buddy_system, order);
		249	}
		250
2059	jermar	251	/** Find and lock zone that can allocate order frames.
367	jermar	252	*
2059	jermar	253	* Assume interrupts are disabled.
367	jermar	254	*
3185	jermar	255	* @param order Size (2^order) of free space we are trying to find.
3207	jermar	256	* @param flags Required flags of the target zone.
3185	jermar	257	* @param pzone Pointer to preferred zone or NULL, on return contains
		258	* zone number.
367	jermar	259	*/
3207	jermar	260	static zone_t *
		261	find_free_zone_and_lock(uint8_t order, int flags, unsigned int *pzone)
367	jermar	262	{
2122	decky	263	unsigned int i;
367	jermar	264	zone_t *z;
2122	decky	265	unsigned int hint = pzone ? *pzone : 0;
367	jermar	266
3207	jermar	267	/* Mask off flags that are not applicable. */
3208	jermar	268	flags &= FRAME_LOW_4_GiB;
3207	jermar	269
814	palkovsky	270	spinlock_lock(&zones.lock);
		271	if (hint >= zones.count)
		272	hint = 0;
		273	i = hint;
		274	do {
		275	z = zones.info[i];
724	palkovsky	276
814	palkovsky	277	spinlock_lock(&z->lock);
367	jermar	278
3207	jermar	279	/*
		280	* Check whether the zone meets the search criteria.
		281	*/
		282	if ((z->flags & flags) == flags) {
		283	/*
		284	* Check if the zone has 2^order frames area available.
		285	*/
		286	if (zone_can_alloc(z, order)) {
		287	spinlock_unlock(&zones.lock);
		288	if (pzone)
		289	*pzone = i;
		290	return z;
		291	}
367	jermar	292	}
814	palkovsky	293	spinlock_unlock(&z->lock);
		294	if (++i >= zones.count)
		295	i = 0;
3207	jermar	296	} while (i != hint);
814	palkovsky	297	spinlock_unlock(&zones.lock);
		298	return NULL;
367	jermar	299	}
		300
2059	jermar	301	/**************************/
814	palkovsky	302	/* Buddy system functions */
2059	jermar	303	/**************************/
814	palkovsky	304
3185	jermar	305	/** Buddy system find_block implementation.
367	jermar	306	*
814	palkovsky	307	* Find block that is parent of current list.
		308	* That means go to lower addresses, until such block is found
367	jermar	309	*
3185	jermar	310	* @param order Order of parent must be different then this
		311	* parameter!!
367	jermar	312	*/
814	palkovsky	313	static link_t zone_buddy_find_block(buddy_system_t b, link_t *child,
2133	jermar	314	uint8_t order)
367	jermar	315	{
2133	jermar	316	frame_t *frame;
		317	zone_t *zone;
814	palkovsky	318	index_t index;
367	jermar	319
814	palkovsky	320	frame = list_get_instance(child, frame_t, buddy_link);
		321	zone = (zone_t *) b->data;
367	jermar	322
814	palkovsky	323	index = frame_index(zone, frame);
		324	do {
		325	if (zone->frames[index].buddy_order != order) {
		326	return &zone->frames[index].buddy_link;
		327	}
		328	} while(index-- > 0);
		329	return NULL;
367	jermar	330	}
479	bondari	331
3185	jermar	332	/** Buddy system find_buddy implementation.
489	jermar	333	*
3185	jermar	334	* @param b Buddy system.
		335	* @param block Block for which buddy should be found.
479	bondari	336	*
3185	jermar	337	* @return Buddy for given block if found.
479	bondari	338	*/
2133	jermar	339	static link_t zone_buddy_find_buddy(buddy_system_t b, link_t *block)
814	palkovsky	340	{
2133	jermar	341	frame_t *frame;
		342	zone_t *zone;
564	jermar	343	index_t index;
480	bondari	344	bool is_left, is_right;
479	bondari	345
480	bondari	346	frame = list_get_instance(block, frame_t, buddy_link);
533	bondari	347	zone = (zone_t *) b->data;
2133	jermar	348	ASSERT(IS_BUDDY_ORDER_OK(frame_index_abs(zone, frame),
		349	frame->buddy_order));
480	bondari	350
724	palkovsky	351	is_left = IS_BUDDY_LEFT_BLOCK_ABS(zone, frame);
		352	is_right = IS_BUDDY_RIGHT_BLOCK_ABS(zone, frame);
814	palkovsky	353
564	jermar	354	ASSERT(is_left ^ is_right);
533	bondari	355	if (is_left) {
3185	jermar	356	index = (frame_index(zone, frame)) +
		357	(1 << frame->buddy_order);
1981	jermar	358	} else { /* if (is_right) */
3185	jermar	359	index = (frame_index(zone, frame)) -
		360	(1 << frame->buddy_order);
533	bondari	361	}
		362
814	palkovsky	363	if (frame_index_valid(zone, index)) {
		364	if (zone->frames[index].buddy_order == frame->buddy_order &&
		365	zone->frames[index].refcount == 0) {
533	bondari	366	return &zone->frames[index].buddy_link;
480	bondari	367	}
		368	}
814	palkovsky	369
539	jermar	370	return NULL;
479	bondari	371	}
		372
3185	jermar	373	/** Buddy system bisect implementation.
479	bondari	374	*
3185	jermar	375	* @param b Buddy system.
		376	* @param block Block to bisect.
480	bondari	377	*
3185	jermar	378	* @return Right block.
479	bondari	379	*/
3185	jermar	380	static link_t zone_buddy_bisect(buddy_system_t b, link_t *block)
		381	{
2133	jermar	382	frame_t frame_l, frame_r;
564	jermar	383
480	bondari	384	frame_l = list_get_instance(block, frame_t, buddy_link);
533	bondari	385	frame_r = (frame_l + (1 << (frame_l->buddy_order - 1)));
564	jermar	386
480	bondari	387	return &frame_r->buddy_link;
479	bondari	388	}
		389
3185	jermar	390	/** Buddy system coalesce implementation.
479	bondari	391	*
3185	jermar	392	* @param b Buddy system.
		393	* @param block_1 First block.
		394	* @param block_2 First block's buddy.
480	bondari	395	*
3185	jermar	396	* @return Coalesced block (actually block that represents lower
		397	* address).
479	bondari	398	*/
2133	jermar	399	static link_t zone_buddy_coalesce(buddy_system_t b, link_t *block_1,
		400	link_t *block_2)
822	palkovsky	401	{
814	palkovsky	402	frame_t frame1, frame2;
564	jermar	403
480	bondari	404	frame1 = list_get_instance(block_1, frame_t, buddy_link);
		405	frame2 = list_get_instance(block_2, frame_t, buddy_link);
564	jermar	406
533	bondari	407	return frame1 < frame2 ? block_1 : block_2;
479	bondari	408	}
		409
3185	jermar	410	/** Buddy system set_order implementation.
489	jermar	411	*
3185	jermar	412	* @param b Buddy system.
		413	* @param block Buddy system block.
		414	* @param order Order to set.
479	bondari	415	*/
2133	jermar	416	static void zone_buddy_set_order(buddy_system_t b, link_t block,
3185	jermar	417	uint8_t order)
		418	{
2133	jermar	419	frame_t *frame;
480	bondari	420	frame = list_get_instance(block, frame_t, buddy_link);
		421	frame->buddy_order = order;
479	bondari	422	}
		423
3185	jermar	424	/** Buddy system get_order implementation.
489	jermar	425	*
3185	jermar	426	* @param b Buddy system.
		427	* @param block Buddy system block.
479	bondari	428	*
3185	jermar	429	* @return Order of block.
479	bondari	430	*/
3185	jermar	431	static uint8_t zone_buddy_get_order(buddy_system_t b, link_t block)
		432	{
2133	jermar	433	frame_t *frame;
480	bondari	434	frame = list_get_instance(block, frame_t, buddy_link);
		435	return frame->buddy_order;
479	bondari	436	}
533	bondari	437
3185	jermar	438	/** Buddy system mark_busy implementation.
533	bondari	439	*
3185	jermar	440	* @param b Buddy system.
		441	* @param block Buddy system block.
533	bondari	442	*/
3185	jermar	443	static void zone_buddy_mark_busy(buddy_system_t b, link_t block)
		444	{
533	bondari	445	frame_t * frame;
822	palkovsky	446
533	bondari	447	frame = list_get_instance(block, frame_t, buddy_link);
		448	frame->refcount = 1;
		449	}
676	bondari	450
3185	jermar	451	/** Buddy system mark_available implementation.
814	palkovsky	452	*
3185	jermar	453	* @param b Buddy system.
		454	* @param block Buddy system block.
814	palkovsky	455	*/
3185	jermar	456	static void zone_buddy_mark_available(buddy_system_t b, link_t block)
		457	{
2133	jermar	458	frame_t *frame;
814	palkovsky	459	frame = list_get_instance(block, frame_t, buddy_link);
		460	frame->refcount = 0;
		461	}
		462
2083	decky	463	static buddy_system_operations_t zone_buddy_system_operations = {
814	palkovsky	464	.find_buddy = zone_buddy_find_buddy,
		465	.bisect = zone_buddy_bisect,
		466	.coalesce = zone_buddy_coalesce,
		467	.set_order = zone_buddy_set_order,
		468	.get_order = zone_buddy_get_order,
		469	.mark_busy = zone_buddy_mark_busy,
		470	.mark_available = zone_buddy_mark_available,
3206	jermar	471	.find_block = zone_buddy_find_block
814	palkovsky	472	};
		473
2059	jermar	474	/******************/
814	palkovsky	475	/* Zone functions */
2059	jermar	476	/******************/
814	palkovsky	477
3185	jermar	478	/** Allocate frame in particular zone.
814	palkovsky	479	*
3185	jermar	480	* Assume zone is locked.
1269	decky	481	* Panics if allocation is impossible.
814	palkovsky	482	*
3185	jermar	483	* @param zone Zone to allocate from.
		484	* @param order Allocate exactly 2^order frames.
1269	decky	485	*
3185	jermar	486	* @return Frame index in zone.
1269	decky	487	*
814	palkovsky	488	*/
1780	jermar	489	static pfn_t zone_frame_alloc(zone_t *zone, uint8_t order)
814	palkovsky	490	{
		491	pfn_t v;
		492	link_t *tmp;
		493	frame_t *frame;
		494
		495	/* Allocate frames from zone buddy system */
		496	tmp = buddy_system_alloc(zone->buddy_system, order);
		497
		498	ASSERT(tmp);
		499
		500	/* Update zone information. */
		501	zone->free_count -= (1 << order);
		502	zone->busy_count += (1 << order);
		503
		504	/* Frame will be actually a first frame of the block. */
		505	frame = list_get_instance(tmp, frame_t, buddy_link);
		506
		507	/* get frame address */
		508	v = make_frame_index(zone, frame);
		509	return v;
		510	}
		511
3185	jermar	512	/** Free frame from zone.
814	palkovsky	513	*
3185	jermar	514	* Assume zone is locked.
1568	palkovsky	515	*
3185	jermar	516	* @param zone Pointer to zone from which the frame is to be freed.
		517	* @param frame_idx Frame index relative to zone.
814	palkovsky	518	*/
820	jermar	519	static void zone_frame_free(zone_t *zone, index_t frame_idx)
814	palkovsky	520	{
		521	frame_t *frame;
1780	jermar	522	uint8_t order;
814	palkovsky	523
		524	frame = &zone->frames[frame_idx];
		525
		526	/* remember frame order */
		527	order = frame->buddy_order;
		528
		529	ASSERT(frame->refcount);
		530
		531	if (!--frame->refcount) {
		532	buddy_system_free(zone->buddy_system, &frame->buddy_link);
946	jermar	533
		534	/* Update zone information. */
		535	zone->free_count += (1 << order);
		536	zone->busy_count -= (1 << order);
814	palkovsky	537	}
		538	}
		539
3185	jermar	540	/** Return frame from zone. */
3188	jermar	541	static frame_t zone_get_frame(zone_t zone, index_t frame_idx)
814	palkovsky	542	{
		543	ASSERT(frame_idx < zone->count);
		544	return &zone->frames[frame_idx];
		545	}
		546
3185	jermar	547	/** Mark frame in zone unavailable to allocation. */
820	jermar	548	static void zone_mark_unavailable(zone_t *zone, index_t frame_idx)
814	palkovsky	549	{
		550	frame_t *frame;
		551	link_t *link;
		552
		553	frame = zone_get_frame(zone, frame_idx);
822	palkovsky	554	if (frame->refcount)
		555	return;
2133	jermar	556	link = buddy_system_alloc_block(zone->buddy_system,
		557	&frame->buddy_link);
814	palkovsky	558	ASSERT(link);
		559	zone->free_count--;
3188	jermar	560
		561	mutex_lock(&mem_avail_mtx);
		562	mem_avail_frames--;
		563	mutex_unlock(&mem_avail_mtx);
814	palkovsky	564	}
		565
3185	jermar	566	/** Join two zones.
822	palkovsky	567	*
3185	jermar	568	* Expect zone_t *z to point to space at least zone_conf_size large.
822	palkovsky	569	*
3185	jermar	570	* Assume z1 & z2 are locked.
1568	palkovsky	571	*
3185	jermar	572	* @param z Target zone structure pointer.
		573	* @param z1 Zone to merge.
		574	* @param z2 Zone to merge.
822	palkovsky	575	*/
		576	static void _zone_merge(zone_t z, zone_t z1, zone_t *z2)
		577	{
1780	jermar	578	uint8_t max_order;
2122	decky	579	unsigned int i;
		580	int z2idx;
822	palkovsky	581	pfn_t frame_idx;
		582	frame_t *frame;
		583
2133	jermar	584	ASSERT(!overlaps(z1->base, z1->count, z2->base, z2->count));
822	palkovsky	585	ASSERT(z1->base < z2->base);
		586
		587	spinlock_initialize(&z->lock, "zone_lock");
		588	z->base = z1->base;
2133	jermar	589	z->count = z2->base + z2->count - z1->base;
822	palkovsky	590	z->flags = z1->flags & z2->flags;
		591
		592	z->free_count = z1->free_count + z2->free_count;
		593	z->busy_count = z1->busy_count + z2->busy_count;
		594
		595	max_order = fnzb(z->count);
		596
2133	jermar	597	z->buddy_system = (buddy_system_t *) &z[1];
		598	buddy_system_create(z->buddy_system, max_order,
		599	&zone_buddy_system_operations, (void *) z);
822	palkovsky	600
2133	jermar	601	z->frames = (frame_t )((uint8_t ) z->buddy_system +
		602	buddy_conf_size(max_order));
822	palkovsky	603	for (i = 0; i < z->count; i++) {
		604	/* This marks all frames busy */
		605	frame_initialize(&z->frames[i]);
		606	}
		607	/* Copy frames from both zones to preserve full frame orders,
1093	palkovsky	608	* parents etc. Set all free frames with refcount=0 to 1, because
822	palkovsky	609	* we add all free frames to buddy allocator later again, clear
1093	palkovsky	610	* order to 0. Don't set busy frames with refcount=0, as they
		611	* will not be reallocated during merge and it would make later
		612	* problems with allocation/free.
822	palkovsky	613	*/
2122	decky	614	for (i = 0; i < z1->count; i++)
822	palkovsky	615	z->frames[i] = z1->frames[i];
2122	decky	616	for (i = 0; i < z2->count; i++) {
822	palkovsky	617	z2idx = i + (z2->base - z1->base);
		618	z->frames[z2idx] = z2->frames[i];
		619	}
1093	palkovsky	620	i = 0;
		621	while (i < z->count) {
		622	if (z->frames[i].refcount) {
		623	/* skip busy frames */
		624	i += 1 << z->frames[i].buddy_order;
		625	} else { /* Free frames, set refcount=1 */
		626	/* All free frames have refcount=0, we need not
		627	* to check the order */
822	palkovsky	628	z->frames[i].refcount = 1;
		629	z->frames[i].buddy_order = 0;
1093	palkovsky	630	i++;
822	palkovsky	631	}
		632	}
		633	/* Add free blocks from the 2 original zones */
		634	while (zone_can_alloc(z1, 0)) {
		635	frame_idx = zone_frame_alloc(z1, 0);
		636	frame = &z->frames[frame_idx];
		637	frame->refcount = 0;
		638	buddy_system_free(z->buddy_system, &frame->buddy_link);
		639	}
		640	while (zone_can_alloc(z2, 0)) {
		641	frame_idx = zone_frame_alloc(z2, 0);
2133	jermar	642	frame = &z->frames[frame_idx + (z2->base - z1->base)];
822	palkovsky	643	frame->refcount = 0;
		644	buddy_system_free(z->buddy_system, &frame->buddy_link);
		645	}
		646	}
		647
3185	jermar	648	/** Return old configuration frames into the zone.
822	palkovsky	649	*
		650	* We have several cases
		651	* - the conf. data is outside of zone -> exit, shall we call frame_free??
824	palkovsky	652	* - the conf. data was created by zone_create or
		653	* updated with reduce_region -> free every frame
		654	*
3185	jermar	655	* @param newzone The actual zone where freeing should occur.
		656	* @param oldzone Pointer to old zone configuration data that should
		657	* be freed from new zone.
822	palkovsky	658	*/
		659	static void return_config_frames(zone_t newzone, zone_t oldzone)
		660	{
		661	pfn_t pfn;
		662	frame_t *frame;
		663	count_t cframes;
2122	decky	664	unsigned int i;
822	palkovsky	665
1780	jermar	666	pfn = ADDR2PFN((uintptr_t)KA2PA(oldzone));
822	palkovsky	667	cframes = SIZE2FRAMES(zone_conf_size(oldzone->count));
		668
		669	if (pfn < newzone->base \|\| pfn >= newzone->base + newzone->count)
		670	return;
		671
		672	frame = &newzone->frames[pfn - newzone->base];
824	palkovsky	673	ASSERT(!frame->buddy_order);
822	palkovsky	674
2122	decky	675	for (i = 0; i < cframes; i++) {
822	palkovsky	676	newzone->busy_count++;
		677	zone_frame_free(newzone, pfn+i-newzone->base);
		678	}
		679	}
		680
3185	jermar	681	/** Reduce allocated block to count of order 0 frames.
824	palkovsky	682	*
		683	* The allocated block need 2^order frames of space. Reduce all frames
1568	palkovsky	684	* in block to order 0 and free the unneeded frames. This means, that
		685	* when freeing the previously allocated block starting with frame_idx,
		686	* you have to free every frame.
824	palkovsky	687	*
		688	* @param zone
3185	jermar	689	* @param frame_idx Index to block.
		690	* @param count Allocated space in block.
824	palkovsky	691	*/
		692	static void zone_reduce_region(zone_t *zone, pfn_t frame_idx, count_t count)
		693	{
		694	count_t i;
1780	jermar	695	uint8_t order;
824	palkovsky	696	frame_t *frame;
		697
2122	decky	698	ASSERT(frame_idx + count < zone->count);
824	palkovsky	699
		700	order = zone->frames[frame_idx].buddy_order;
2122	decky	701	ASSERT((count_t) (1 << order) >= count);
824	palkovsky	702
		703	/* Reduce all blocks to order 0 */
2122	decky	704	for (i = 0; i < (count_t) (1 << order); i++) {
824	palkovsky	705	frame = &zone->frames[i + frame_idx];
		706	frame->buddy_order = 0;
2133	jermar	707	if (!frame->refcount)
824	palkovsky	708	frame->refcount = 1;
		709	ASSERT(frame->refcount == 1);
		710	}
		711	/* Free unneeded frames */
2122	decky	712	for (i = count; i < (count_t) (1 << order); i++) {
824	palkovsky	713	zone_frame_free(zone, i + frame_idx);
		714	}
		715	}
		716
3185	jermar	717	/** Merge zones z1 and z2.
822	palkovsky	718	*
		719	* - the zones must be 2 zones with no zone existing in between,
		720	* which means that z2 = z1+1
		721	*
		722	* - When you create a new zone, the frame allocator configuration does
		723	* not to be 2^order size. Once the allocator is running it is no longer
		724	* possible, merged configuration data occupies more space :-/
		725	*/
2122	decky	726	void zone_merge(unsigned int z1, unsigned int z2)
822	palkovsky	727	{
		728	ipl_t ipl;
		729	zone_t zone1, zone2, *newzone;
2122	decky	730	unsigned int cframes;
1780	jermar	731	uint8_t order;
2122	decky	732	unsigned int i;
822	palkovsky	733	pfn_t pfn;
		734
		735	ipl = interrupts_disable();
		736	spinlock_lock(&zones.lock);
		737
2745	decky	738	if ((z1 >= zones.count) \|\| (z2 >= zones.count))
822	palkovsky	739	goto errout;
		740	/* We can join only 2 zones with none existing inbetween */
3188	jermar	741	if (z2 - z1 != 1)
822	palkovsky	742	goto errout;
		743
		744	zone1 = zones.info[z1];
		745	zone2 = zones.info[z2];
		746	spinlock_lock(&zone1->lock);
		747	spinlock_lock(&zone2->lock);
		748
2133	jermar	749	cframes = SIZE2FRAMES(zone_conf_size(zone2->base + zone2->count -
		750	zone1->base));
1700	palkovsky	751	if (cframes == 1)
		752	order = 0;
		753	else
		754	order = fnzb(cframes - 1) + 1;
822	palkovsky	755
		756	/* Allocate zonedata inside one of the zones */
		757	if (zone_can_alloc(zone1, order))
		758	pfn = zone1->base + zone_frame_alloc(zone1, order);
		759	else if (zone_can_alloc(zone2, order))
		760	pfn = zone2->base + zone_frame_alloc(zone2, order);
		761	else
		762	goto errout2;
		763
2122	decky	764	newzone = (zone_t *) PA2KA(PFN2ADDR(pfn));
822	palkovsky	765
		766	_zone_merge(newzone, zone1, zone2);
		767
824	palkovsky	768	/* Free unneeded config frames */
		769	zone_reduce_region(newzone, pfn - newzone->base, cframes);
822	palkovsky	770	/* Subtract zone information from busy frames */
824	palkovsky	771	newzone->busy_count -= cframes;
822	palkovsky	772
824	palkovsky	773	/* Replace existing zones in zoneinfo list */
822	palkovsky	774	zones.info[z1] = newzone;
1037	decky	775	for (i = z2 + 1; i < zones.count; i++)
		776	zones.info[i - 1] = zones.info[i];
822	palkovsky	777	zones.count--;
		778
		779	/* Free old zone information */
		780	return_config_frames(newzone, zone1);
		781	return_config_frames(newzone, zone2);
		782	errout2:
		783	/* Nobody is allowed to enter to zone, so we are safe
		784	* to touch the spinlocks last time */
		785	spinlock_unlock(&zone1->lock);
		786	spinlock_unlock(&zone2->lock);
		787	errout:
		788	spinlock_unlock(&zones.lock);
		789	interrupts_restore(ipl);
		790	}
		791
3185	jermar	792	/** Merge all zones into one big zone.
822	palkovsky	793	*
		794	* It is reasonable to do this on systems whose bios reports parts in chunks,
		795	* so that we could have 1 zone (it's faster).
		796	*/
		797	void zone_merge_all(void)
		798	{
		799	int count = zones.count;
		800
		801	while (zones.count > 1 && --count) {
3188	jermar	802	zone_merge(0, 1);
822	palkovsky	803	break;
		804	}
		805	}
		806
3185	jermar	807	/** Create new frame zone.
814	palkovsky	808	*
3185	jermar	809	* @param start Physical address of the first frame within the zone.
		810	* @param count Count of frames in zone.
		811	* @param z Address of configuration information of zone.
		812	* @param flags Zone flags.
814	palkovsky	813	*
3185	jermar	814	* @return Initialized zone.
814	palkovsky	815	*/
822	palkovsky	816	static void zone_construct(pfn_t start, count_t count, zone_t *z, int flags)
814	palkovsky	817	{
2122	decky	818	unsigned int i;
1780	jermar	819	uint8_t max_order;
814	palkovsky	820
		821	spinlock_initialize(&z->lock, "zone_lock");
		822	z->base = start;
		823	z->count = count;
3207	jermar	824
		825	/* Mask off flags that are calculated automatically. */
3208	jermar	826	flags &= ~FRAME_LOW_4_GiB;
3207	jermar	827	/* Determine calculated flags. */
3208	jermar	828	if (z->base + count < (1ULL << (32 - FRAME_WIDTH))) /* 4 GiB */
		829	flags \|= FRAME_LOW_4_GiB;
3207	jermar	830
814	palkovsky	831	z->flags = flags;
3207	jermar	832
814	palkovsky	833	z->free_count = count;
		834	z->busy_count = 0;
		835
		836	/*
		837	* Compute order for buddy system, initialize
		838	*/
822	palkovsky	839	max_order = fnzb(count);
814	palkovsky	840	z->buddy_system = (buddy_system_t *)&z[1];
		841
		842	buddy_system_create(z->buddy_system, max_order,
3185	jermar	843	&zone_buddy_system_operations, (void *) z);
814	palkovsky	844
		845	/* Allocate frames _after_ the conframe */
		846	/* Check sizes */
2133	jermar	847	z->frames = (frame_t )((uint8_t ) z->buddy_system +
		848	buddy_conf_size(max_order));
2122	decky	849	for (i = 0; i < count; i++) {
814	palkovsky	850	frame_initialize(&z->frames[i]);
		851	}
852	palkovsky	852
814	palkovsky	853	/* Stuffing frames */
		854	for (i = 0; i < count; i++) {
		855	z->frames[i].refcount = 0;
		856	buddy_system_free(z->buddy_system, &z->frames[i].buddy_link);
		857	}
		858	}
		859
3185	jermar	860	/** Compute configuration data size for zone.
1568	palkovsky	861	*
3185	jermar	862	* @param count Size of zone in frames.
		863	* @return Size of zone configuration info (in bytes).
1568	palkovsky	864	*/
1780	jermar	865	uintptr_t zone_conf_size(count_t count)
814	palkovsky	866	{
3057	decky	867	int size = sizeof(zone_t) + count * sizeof(frame_t);
814	palkovsky	868	int max_order;
		869
822	palkovsky	870	max_order = fnzb(count);
814	palkovsky	871	size += buddy_conf_size(max_order);
		872	return size;
		873	}
		874
3185	jermar	875	/** Create and add zone to system.
814	palkovsky	876	*
3185	jermar	877	* @param start First frame number (absolute).
		878	* @param count Size of zone in frames.
		879	* @param confframe Where configuration frames are supposed to be.
		880	* Automatically checks, that we will not disturb the
		881	* kernel and possibly init. If confframe is given
		882	* _outside_ this zone, it is expected, that the area is
		883	* already marked BUSY and big enough to contain
		884	* zone_conf_size() amount of data. If the confframe is
		885	* inside the area, the zone free frame information is
		886	* modified not to include it.
822	palkovsky	887	*
3185	jermar	888	* @return Zone number or -1 on error.
814	palkovsky	889	*/
822	palkovsky	890	int zone_create(pfn_t start, count_t count, pfn_t confframe, int flags)
814	palkovsky	891	{
		892	zone_t *z;
1780	jermar	893	uintptr_t addr;
820	jermar	894	count_t confcount;
2122	decky	895	unsigned int i;
822	palkovsky	896	int znum;
814	palkovsky	897
		898	/* Theoretically we could have here 0, practically make sure
		899	* nobody tries to do that. If some platform requires, remove
		900	* the assert
		901	*/
		902	ASSERT(confframe);
		903	/* If conframe is supposed to be inside our zone, then make sure
		904	* it does not span kernel & init
		905	*/
822	palkovsky	906	confcount = SIZE2FRAMES(zone_conf_size(count));
3188	jermar	907	if (confframe >= start && confframe < start + count) {
		908	for (; confframe < start + count; confframe++) {
814	palkovsky	909	addr = PFN2ADDR(confframe);
2133	jermar	910	if (overlaps(addr, PFN2ADDR(confcount),
		911	KA2PA(config.base), config.kernel_size))
814	palkovsky	912	continue;
1037	decky	913
2133	jermar	914	if (overlaps(addr, PFN2ADDR(confcount),
		915	KA2PA(config.stack_base), config.stack_size))
1833	decky	916	continue;
		917
1037	decky	918	bool overlap = false;
		919	count_t i;
		920	for (i = 0; i < init.cnt; i++)
2133	jermar	921	if (overlaps(addr, PFN2ADDR(confcount),
		922	KA2PA(init.tasks[i].addr),
		923	init.tasks[i].size)) {
1037	decky	924	overlap = true;
		925	break;
		926	}
		927	if (overlap)
		928	continue;
		929
814	palkovsky	930	break;
		931	}
1037	decky	932	if (confframe >= start + count)
814	palkovsky	933	panic("Cannot find configuration data for zone.");
		934	}
		935
2725	decky	936	z = (zone_t *) PA2KA(PFN2ADDR(confframe));
822	palkovsky	937	zone_construct(start, count, z, flags);
		938	znum = zones_add_zone(z);
		939	if (znum == -1)
		940	return -1;
		941
3188	jermar	942	mutex_lock(&mem_avail_mtx);
		943	mem_avail_frames += count;
		944	mutex_unlock(&mem_avail_mtx);
		945
814	palkovsky	946	/* If confdata in zone, mark as unavailable */
2122	decky	947	if (confframe >= start && confframe < start + count)
		948	for (i = confframe; i < confframe + confcount; i++) {
814	palkovsky	949	zone_mark_unavailable(z, i - z->base);
		950	}
3188	jermar	951
822	palkovsky	952	return znum;
814	palkovsky	953	}
		954
		955	/***************************************/
		956	/* Frame functions */
		957
3185	jermar	958	/** Set parent of frame. */
2122	decky	959	void frame_set_parent(pfn_t pfn, void *data, unsigned int hint)
814	palkovsky	960	{
		961	zone_t *zone = find_zone_and_lock(pfn, &hint);
		962
		963	ASSERT(zone);
		964
3188	jermar	965	zone_get_frame(zone, pfn - zone->base)->parent = data;
814	palkovsky	966	spinlock_unlock(&zone->lock);
		967	}
		968
2133	jermar	969	void *frame_get_parent(pfn_t pfn, unsigned int hint)
814	palkovsky	970	{
		971	zone_t *zone = find_zone_and_lock(pfn, &hint);
		972	void *res;
		973
		974	ASSERT(zone);
		975	res = zone_get_frame(zone, pfn - zone->base)->parent;
		976
		977	spinlock_unlock(&zone->lock);
		978	return res;
		979	}
		980
		981	/** Allocate power-of-two frames of physical memory.
		982	*
3185	jermar	983	* @param order Allocate exactly 2^order frames.
		984	* @param flags Flags for host zone selection and address processing.
		985	* @param pzone Preferred zone.
814	palkovsky	986	*
3185	jermar	987	* @return Physical address of the allocated frame.
1269	decky	988	*
814	palkovsky	989	*/
3185	jermar	990	void frame_alloc_generic(uint8_t order, int flags, unsigned int pzone)
814	palkovsky	991	{
		992	ipl_t ipl;
		993	int freed;
		994	pfn_t v;
		995	zone_t *zone;
3188	jermar	996	unsigned long gen = 0;
814	palkovsky	997
		998	loop:
		999	ipl = interrupts_disable();
1269	decky	1000
814	palkovsky	1001	/*
		1002	* First, find suitable frame zone.
		1003	*/
3207	jermar	1004	zone = find_free_zone_and_lock(order, flags, pzone);
1269	decky	1005
814	palkovsky	1006	/* If no memory, reclaim some slab memory,
		1007	if it does not help, reclaim all */
		1008	if (!zone && !(flags & FRAME_NO_RECLAIM)) {
		1009	freed = slab_reclaim(0);
		1010	if (freed)
3207	jermar	1011	zone = find_free_zone_and_lock(order, flags, pzone);
814	palkovsky	1012	if (!zone) {
		1013	freed = slab_reclaim(SLAB_RECLAIM_ALL);
		1014	if (freed)
3207	jermar	1015	zone = find_free_zone_and_lock(order, flags,
		1016	pzone);
814	palkovsky	1017	}
		1018	}
		1019	if (!zone) {
		1020	/*
3187	jermar	1021	* Sleep until some frames are available again.
814	palkovsky	1022	*/
3187	jermar	1023	if (flags & FRAME_ATOMIC) {
		1024	interrupts_restore(ipl);
1760	palkovsky	1025	return 0;
3187	jermar	1026	}
814	palkovsky	1027
3187	jermar	1028	#ifdef CONFIG_DEBUG
3188	jermar	1029	unsigned long avail;
		1030
		1031	mutex_lock(&mem_avail_mtx);
		1032	avail = mem_avail_frames;
		1033	mutex_unlock(&mem_avail_mtx);
		1034
		1035	printf("Thread %" PRIu64 " waiting for %u frames, "
		1036	"%u available.\n", THREAD->tid, 1ULL << order, avail);
3187	jermar	1037	#endif
		1038
3188	jermar	1039	mutex_lock(&mem_avail_mtx);
		1040	while ((mem_avail_frames < (1ULL << order)) \|\|
		1041	gen == mem_avail_gen)
		1042	condvar_wait(&mem_avail_cv, &mem_avail_mtx);
		1043	gen = mem_avail_gen;
		1044	mutex_unlock(&mem_avail_mtx);
3187	jermar	1045
		1046	#ifdef CONFIG_DEBUG
3188	jermar	1047	mutex_lock(&mem_avail_mtx);
		1048	avail = mem_avail_frames;
		1049	mutex_unlock(&mem_avail_mtx);
		1050
		1051	printf("Thread %" PRIu64 " woken up, %u frames available.\n",
		1052	THREAD->tid, avail);
3187	jermar	1053	#endif
		1054
		1055	interrupts_restore(ipl);
814	palkovsky	1056	goto loop;
		1057	}
1269	decky	1058
		1059	v = zone_frame_alloc(zone, order);
814	palkovsky	1060	v += zone->base;
		1061
		1062	spinlock_unlock(&zone->lock);
3188	jermar	1063
		1064	mutex_lock(&mem_avail_mtx);
		1065	mem_avail_frames -= (1ULL << order);
		1066	mutex_unlock(&mem_avail_mtx);
		1067
814	palkovsky	1068	interrupts_restore(ipl);
		1069
1760	palkovsky	1070	if (flags & FRAME_KA)
		1071	return (void *)PA2KA(PFN2ADDR(v));
		1072	return (void *)PFN2ADDR(v);
814	palkovsky	1073	}
		1074
		1075	/** Free a frame.
		1076	*
1854	jermar	1077	* Find respective frame structure for supplied physical frame address.
814	palkovsky	1078	* Decrement frame reference count.
		1079	* If it drops to zero, move the frame structure to free list.
		1080	*
3185	jermar	1081	* @param frame Physical Address of of the frame to be freed.
814	palkovsky	1082	*/
1780	jermar	1083	void frame_free(uintptr_t frame)
814	palkovsky	1084	{
		1085	ipl_t ipl;
		1086	zone_t *zone;
1760	palkovsky	1087	pfn_t pfn = ADDR2PFN(frame);
814	palkovsky	1088
		1089	ipl = interrupts_disable();
3187	jermar	1090
814	palkovsky	1091	/*
		1092	* First, find host frame zone for addr.
		1093	*/
3187	jermar	1094	zone = find_zone_and_lock(pfn, NULL);
814	palkovsky	1095	ASSERT(zone);
		1096
3187	jermar	1097	zone_frame_free(zone, pfn - zone->base);
814	palkovsky	1098
		1099	spinlock_unlock(&zone->lock);
3187	jermar	1100
		1101	/*
		1102	* Signal that some memory has been freed.
		1103	*/
3188	jermar	1104	mutex_lock(&mem_avail_mtx);
		1105	mem_avail_frames++;
		1106	mem_avail_gen++;
		1107	condvar_broadcast(&mem_avail_cv);
		1108	mutex_unlock(&mem_avail_mtx);
3187	jermar	1109
814	palkovsky	1110	interrupts_restore(ipl);
		1111	}
		1112
1236	jermar	1113	/** Add reference to frame.
		1114	*
		1115	* Find respective frame structure for supplied PFN and
		1116	* increment frame reference count.
		1117	*
3185	jermar	1118	* @param pfn Frame number of the frame to be freed.
1236	jermar	1119	*/
		1120	void frame_reference_add(pfn_t pfn)
		1121	{
		1122	ipl_t ipl;
		1123	zone_t *zone;
		1124	frame_t *frame;
814	palkovsky	1125
1236	jermar	1126	ipl = interrupts_disable();
		1127
		1128	/*
		1129	* First, find host frame zone for addr.
		1130	*/
3185	jermar	1131	zone = find_zone_and_lock(pfn, NULL);
1236	jermar	1132	ASSERT(zone);
		1133
3185	jermar	1134	frame = &zone->frames[pfn - zone->base];
1236	jermar	1135	frame->refcount++;
		1136
		1137	spinlock_unlock(&zone->lock);
		1138	interrupts_restore(ipl);
		1139	}
814	palkovsky	1140
3185	jermar	1141	/** Mark given range unavailable in frame zones. */
820	jermar	1142	void frame_mark_unavailable(pfn_t start, count_t count)
814	palkovsky	1143	{
2122	decky	1144	unsigned int i;
814	palkovsky	1145	zone_t *zone;
2122	decky	1146	unsigned int prefzone = 0;
852	palkovsky	1147
2122	decky	1148	for (i = 0; i < count; i++) {
1981	jermar	1149	zone = find_zone_and_lock(start + i, &prefzone);
814	palkovsky	1150	if (!zone) /* PFN not found */
		1151	continue;
1981	jermar	1152	zone_mark_unavailable(zone, start + i - zone->base);
814	palkovsky	1153
		1154	spinlock_unlock(&zone->lock);
		1155	}
		1156	}
		1157
3185	jermar	1158	/** Initialize physical memory management. */
814	palkovsky	1159	void frame_init(void)
		1160	{
		1161	if (config.cpu_active == 1) {
		1162	zones.count = 0;
1981	jermar	1163	spinlock_initialize(&zones.lock, "zones.lock");
3188	jermar	1164	mutex_initialize(&mem_avail_mtx, MUTEX_ACTIVE);
		1165	condvar_initialize(&mem_avail_cv);
814	palkovsky	1166	}
		1167	/* Tell the architecture to create some memory */
		1168	frame_arch_init();
		1169	if (config.cpu_active == 1) {
2133	jermar	1170	frame_mark_unavailable(ADDR2PFN(KA2PA(config.base)),
		1171	SIZE2FRAMES(config.kernel_size));
		1172	frame_mark_unavailable(ADDR2PFN(KA2PA(config.stack_base)),
		1173	SIZE2FRAMES(config.stack_size));
1037	decky	1174
		1175	count_t i;
2133	jermar	1176	for (i = 0; i < init.cnt; i++) {
		1177	pfn_t pfn = ADDR2PFN(KA2PA(init.tasks[i].addr));
		1178	frame_mark_unavailable(pfn,
		1179	SIZE2FRAMES(init.tasks[i].size));
		1180	}
1599	palkovsky	1181
1894	jermar	1182	if (ballocs.size)
2133	jermar	1183	frame_mark_unavailable(ADDR2PFN(KA2PA(ballocs.base)),
		1184	SIZE2FRAMES(ballocs.size));
1894	jermar	1185
1599	palkovsky	1186	/* Black list first frame, as allocating NULL would
1790	jermar	1187	* fail in some places */
1599	palkovsky	1188	frame_mark_unavailable(0, 1);
814	palkovsky	1189	}
		1190	}
		1191
		1192
3185	jermar	1193	/** Return total size of all zones. */
		1194	uint64_t zone_total_size(void)
		1195	{
2725	decky	1196	zone_t *zone = NULL;
		1197	unsigned int i;
		1198	ipl_t ipl;
		1199	uint64_t total = 0;
814	palkovsky	1200
2725	decky	1201	ipl = interrupts_disable();
		1202	spinlock_lock(&zones.lock);
		1203
		1204	for (i = 0; i < zones.count; i++) {
		1205	zone = zones.info[i];
		1206	spinlock_lock(&zone->lock);
		1207	total += (uint64_t) FRAMES2SIZE(zone->count);
		1208	spinlock_unlock(&zone->lock);
		1209	}
		1210
		1211	spinlock_unlock(&zones.lock);
		1212	interrupts_restore(ipl);
		1213
		1214	return total;
		1215	}
		1216
3185	jermar	1217	/** Prints list of zones. */
		1218	void zone_print_list(void)
		1219	{
676	bondari	1220	zone_t *zone = NULL;
2122	decky	1221	unsigned int i;
701	jermar	1222	ipl_t ipl;
		1223
3057	decky	1224	#ifdef __32_BITS__
		1225	printf("# base address free frames busy frames\n");
		1226	printf("-- ------------ ------------ ------------\n");
		1227	#endif
		1228
		1229	#ifdef __64_BITS__
		1230	printf("# base address free frames busy frames\n");
		1231	printf("-- -------------------- ------------ ------------\n");
		1232	#endif
2712	decky	1233
3205	jermar	1234	/*
		1235	* Because printing may require allocation of memory, we may not hold
		1236	* the frame allocator locks when printing zone statistics. Therefore,
		1237	* we simply gather the statistics under the protection of the locks and
		1238	* print the statistics when the locks have been released.
		1239	*
		1240	* When someone adds/removes zones while we are printing the statistics,
		1241	* we may end up with inaccurate output (e.g. a zone being skipped from
		1242	* the listing).
		1243	*/
		1244
		1245	for (i = 0; ; i++) {
		1246	uintptr_t base;
		1247	count_t free_count;
		1248	count_t busy_count;
		1249
		1250	ipl = interrupts_disable();
		1251	spinlock_lock(&zones.lock);
		1252
		1253	if (i >= zones.count) {
		1254	spinlock_unlock(&zones.lock);
		1255	interrupts_restore(ipl);
		1256	break;
		1257	}
		1258
814	palkovsky	1259	zone = zones.info[i];
683	bondari	1260	spinlock_lock(&zone->lock);
3057	decky	1261
3205	jermar	1262	base = PFN2ADDR(zone->base);
		1263	free_count = zone->free_count;
		1264	busy_count = zone->busy_count;
		1265
		1266	spinlock_unlock(&zone->lock);
		1267
		1268	spinlock_unlock(&zones.lock);
		1269	interrupts_restore(ipl);
		1270
3057	decky	1271	#ifdef __32_BITS__
3205	jermar	1272	printf("%-2u %10p %12" PRIc " %12" PRIc "\n", i, base,
		1273	free_count, busy_count);
3057	decky	1274	#endif
		1275
		1276	#ifdef __64_BITS__
3205	jermar	1277	printf("%-2u %18p %12" PRIc " %12" PRIc "\n", i, base,
		1278	free_count, busy_count);
3057	decky	1279	#endif
2712	decky	1280
676	bondari	1281	}
		1282	}
		1283
1708	jermar	1284	/** Prints zone details.
677	bondari	1285	*
3185	jermar	1286	* @param num Zone base address or zone number.
677	bondari	1287	*/
3185	jermar	1288	void zone_print_one(unsigned int num)
		1289	{
814	palkovsky	1290	zone_t *zone = NULL;
701	jermar	1291	ipl_t ipl;
2122	decky	1292	unsigned int i;
3206	jermar	1293	uintptr_t base;
		1294	count_t count;
		1295	count_t busy_count;
		1296	count_t free_count;
701	jermar	1297
		1298	ipl = interrupts_disable();
814	palkovsky	1299	spinlock_lock(&zones.lock);
822	palkovsky	1300
1037	decky	1301	for (i = 0; i < zones.count; i++) {
2725	decky	1302	if ((i == num) \|\| (PFN2ADDR(zones.info[i]->base) == num)) {
822	palkovsky	1303	zone = zones.info[i];
		1304	break;
		1305	}
676	bondari	1306	}
822	palkovsky	1307	if (!zone) {
3206	jermar	1308	spinlock_unlock(&zones.lock);
		1309	interrupts_restore(ipl);
822	palkovsky	1310	printf("Zone not found.\n");
3206	jermar	1311	return;
822	palkovsky	1312	}
676	bondari	1313
683	bondari	1314	spinlock_lock(&zone->lock);
3206	jermar	1315	base = PFN2ADDR(zone->base);
		1316	count = zone->count;
		1317	busy_count = zone->busy_count;
		1318	free_count = zone->free_count;
2725	decky	1319	spinlock_unlock(&zone->lock);
814	palkovsky	1320	spinlock_unlock(&zones.lock);
701	jermar	1321	interrupts_restore(ipl);
3206	jermar	1322
		1323	printf("Zone base address: %p\n", base);
		1324	printf("Zone size: %" PRIc " frames (%" PRIs " KiB)\n", count,
		1325	SIZE2KB(FRAMES2SIZE(count)));
		1326	printf("Allocated space: %" PRIc " frames (%" PRIs " KiB)\n",
		1327	busy_count, SIZE2KB(FRAMES2SIZE(busy_count)));
		1328	printf("Available space: %" PRIc " frames (%" PRIs " KiB)\n",
		1329	free_count, SIZE2KB(FRAMES2SIZE(free_count)));
676	bondari	1330	}
		1331
1757	jermar	1332	/** @}
1702	cejka	1333	*/
2133	jermar	1334

Subversion Repositories HelenOS

(root)//branches/sparc/kernel/generic/src/mm/frame.c – Rev 3343