Subversion Repositories HelenOS-historic

Rev

Rev 167 | Rev 232 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2001-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. #include <arch/pm.h>
  30. #include <config.h>
  31. #include <arch/types.h>
  32. #include <typedefs.h>
  33. #include <arch/interrupt.h>
  34. #include <arch/asm.h>
  35. #include <arch/context.h>
  36. #include <panic.h>
  37. #include <arch/mm/page.h>
  38. #include <mm/heap.h>
  39. #include <memstr.h>
  40.  
  41. /*
  42.  * Early ia32 configuration functions and data structures.
  43.  */
  44.  
  45. /*
  46.  * We have no use for segmentation so we set up flat mode. In this
  47.  * mode, we use, for each privilege level, two segments spanning the
  48.  * whole memory. One is for code and one is for data.
  49.  */
  50. struct descriptor gdt[GDT_ITEMS] = {
  51.     /* NULL descriptor */
  52.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
  53.     /* KTEXT descriptor */
  54.     { 0xffff, 0, 0, AR_PRESENT | AR_CODE | DPL_KERNEL, 0xf, 0, 0, 1, 1, 0 },
  55.     /* KDATA descriptor */
  56.     { 0xffff, 0, 0, AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_KERNEL, 0xf, 0, 0, 1, 1, 0 },
  57.     /* UTEXT descriptor */
  58.     { 0xffff, 0, 0, AR_PRESENT | AR_CODE | DPL_USER, 0xf, 0, 0, 1, 1, 0 },
  59.     /* UDATA descriptor */
  60.     { 0xffff, 0, 0, AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_USER, 0xf, 0, 0, 1, 1, 0 },
  61.     /* TSS descriptor - set up will be completed later */
  62.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
  63. };
  64.  
  65. static struct idescriptor idt[IDT_ITEMS];
  66.  
  67. static struct tss tss;
  68.  
  69. struct tss *tss_p = NULL;
  70.  
  71. /* gdtr is changed by kmp before next CPU is initialized */
  72. struct ptr_16_32 gdtr __attribute__ ((section ("K_DATA_START"))) = { .limit = sizeof(gdt), .base = KA2PA((__address) gdt) };
  73. struct ptr_16_32 idtr __attribute__ ((section ("K_DATA_START"))) = { .limit = sizeof(idt), .base = KA2PA((__address) idt) };
  74.  
  75. void gdt_setbase(struct descriptor *d, __address base)
  76. {
  77.     d->base_0_15 = base & 0xffff;
  78.     d->base_16_23 = ((base) >> 16) & 0xff;
  79.     d->base_24_31 = ((base) >> 24) & 0xff;
  80. }
  81.  
  82. void gdt_setlimit(struct descriptor *d, __u32 limit)
  83. {
  84.     d->limit_0_15 = limit & 0xffff;
  85.     d->limit_16_19 = (limit >> 16) & 0xf;
  86. }
  87.  
  88. void idt_setoffset(struct idescriptor *d, __address offset)
  89. {
  90.     /*
  91.      * Offset is a linear address.
  92.      */
  93.     d->offset_0_15 = offset & 0xffff;
  94.     d->offset_16_31 = offset >> 16;
  95. }
  96.  
  97. void tss_initialize(struct tss *t)
  98. {
  99.     memsetb((__address) t, sizeof(struct tss), 0);
  100. }
  101.  
  102. /*
  103.  * This function takes care of proper setup of IDT and IDTR.
  104.  */
  105. void idt_init(void)
  106. {
  107.     struct idescriptor *d;
  108.     int i;
  109.  
  110.     for (i = 0; i < IDT_ITEMS; i++) {
  111.         d = &idt[i];
  112.  
  113.         d->unused = 0;
  114.         d->selector = selector(KTEXT_DES);
  115.  
  116.         d->access = AR_PRESENT | AR_INTERRUPT;  /* masking interrupt */
  117.  
  118.         if (i == VECTOR_SYSCALL) {
  119.             /*
  120.              * The syscall interrupt gate must be calleable from userland.
  121.              */
  122.             d->access |= DPL_USER;
  123.         }
  124.        
  125.         idt_setoffset(d, ((__address) interrupt_handlers) + i*interrupt_handler_size);
  126.         trap_register(i, null_interrupt);
  127.     }
  128.     trap_register(13, gp_fault);
  129.     trap_register( 7, nm_fault);
  130.     trap_register(12, ss_fault);
  131. }
  132.  
  133.  
  134. /* Clean IOPL(12,13) and NT(14) flags in EFLAGS register */
  135. static void clean_IOPL_NT_flags(void)
  136. {
  137.     asm
  138.     (
  139.         "pushfl;"
  140.         "pop %%eax;"
  141.         "and $0xffff8fff,%%eax;"
  142.         "push %%eax;"
  143.         "popfl;"
  144.         :
  145.         :
  146.         :"%eax"
  147.     );
  148. }
  149.  
  150. /* Clean AM(18) flag in CR0 register */
  151. static void clean_AM_flag(void)
  152. {
  153.     asm
  154.     (
  155.         "mov %%cr0,%%eax;"
  156.         "and $0xFFFBFFFF,%%eax;"
  157.         "mov %%eax,%%cr0;"
  158.         :
  159.         :
  160.         :"%eax"
  161.     );
  162. }
  163.  
  164. void pm_init(void)
  165. {
  166.     struct descriptor *gdt_p = (struct descriptor *) PA2KA(gdtr.base);
  167.  
  168.     /*
  169.      * Each CPU has its private GDT and TSS.
  170.      * All CPUs share one IDT.
  171.      */
  172.  
  173.     if (config.cpu_active == 1) {
  174.         idt_init();
  175.         /*
  176.          * NOTE: bootstrap CPU has statically allocated TSS, because
  177.          * the heap hasn't been initialized so far.
  178.          */
  179.         tss_p = &tss;
  180.     }
  181.     else {
  182.         tss_p = (struct tss *) malloc(sizeof(struct tss));
  183.         if (!tss_p)
  184.             panic("could not allocate TSS\n");
  185.     }
  186.  
  187.     tss_initialize(tss_p);
  188.    
  189.     gdt_p[TSS_DES].access = AR_PRESENT | AR_TSS | DPL_KERNEL;
  190.     gdt_p[TSS_DES].special = 1;
  191.     gdt_p[TSS_DES].granularity = 1;
  192.    
  193.     gdt_setbase(&gdt_p[TSS_DES], (__address) tss_p);
  194.     gdt_setlimit(&gdt_p[TSS_DES], sizeof(struct tss) - 1);
  195.  
  196.     /*
  197.      * As of this moment, the current CPU has its own GDT pointing
  198.      * to its own TSS. We just need to load the TR register.
  199.      */
  200.     __asm__("ltr %0" : : "r" ((__u16) selector(TSS_DES)));
  201.    
  202.     clean_IOPL_NT_flags();    /* Disable I/O on nonprivileged levels */
  203.     clean_AM_flag();          /* Disable alignment check */
  204. }
  205.