Subversion Repositories HelenOS-historic

Rev

Rev 110 | Rev 113 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2001-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. #include <arch/pm.h>
  30. #include <config.h>
  31. #include <arch/types.h>
  32. #include <typedefs.h>
  33. #include <arch/interrupt.h>
  34. #include <arch/asm.h>
  35. #include <arch/context.h>
  36. #include <panic.h>
  37.  
  38. /*
  39.  * Early ia32 configuration functions and data structures.
  40.  */
  41.  
  42. /*
  43.  * We have no use for segmentation so we set up flat mode. In this
  44.  * mode, we use, for each privilege level, two segments spanning the
  45.  * whole memory. One is for code and one is for data.
  46.  */
  47. struct descriptor gdt[GDT_ITEMS] = {
  48.     /* NULL descriptor */
  49.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
  50.     /* KTEXT descriptor */
  51.     { 0xffff, 0, 0, AR_PRESENT | AR_CODE | DPL_KERNEL, 0xf, 0, 0, 1, 1, 0 },
  52.     /* KDATA descriptor */
  53.     { 0xffff, 0, 0, AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_KERNEL, 0xf, 0, 0, 1, 1, 0 },
  54.     /* UTEXT descriptor */
  55.     { 0xffff, 0, 0, AR_PRESENT | AR_CODE | DPL_USER, 0xf, 0, 0, 1, 1, 0 },
  56.     /* UDATA descriptor */
  57.     { 0xffff, 0, 0, AR_PRESENT | AR_DATA | AR_WRITABLE | DPL_USER, 0xf, 0, 0, 1, 1, 0 },
  58.     /* TSS descriptor - set up will be completed later */
  59.     { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
  60. };
  61.  
  62. static struct idescriptor idt[IDT_ITEMS];
  63.  
  64. static struct tss tss;
  65.  
  66. struct tss *tss_p = NULL;
  67.  
  68. /* gdtr is changed by kmp before next CPU is initialized */
  69. struct ptr_16_32 gdtr __attribute__ ((section ("K_DATA_START"))) = { .limit = sizeof(gdt), .base = KA2PA((__address) gdt) };
  70. struct ptr_16_32 idtr __attribute__ ((section ("K_DATA_START"))) = { .limit = sizeof(idt), .base = KA2PA((__address) idt) };
  71.  
  72. void gdt_setbase(struct descriptor *d, __address base)
  73. {
  74.         d->base_0_15 = base & 0xffff;
  75.         d->base_16_23 = ((base) >> 16) & 0xff;
  76.         d->base_24_31 = ((base) >> 24) & 0xff;
  77.  
  78. }
  79.  
  80. void gdt_setlimit(struct descriptor *d, __u32 limit)
  81. {
  82.         d->limit_0_15 = limit & 0xffff;
  83.         d->limit_16_19 = (limit >> 16) & 0xf;
  84. }
  85.  
  86. void idt_setoffset(struct idescriptor *d, __address offset)
  87. {
  88.     /*
  89.      * Offset is a linear address.
  90.      */
  91.     d->offset_0_15 = offset & 0xffff;
  92.     d->offset_16_31 = offset >> 16;
  93. }
  94.  
  95. void tss_initialize(struct tss *t)
  96. {
  97.     memsetb((__address) t, sizeof(struct tss), 0);
  98. }
  99.  
  100. /*
  101.  * This function takes care of proper setup of IDT and IDTR.
  102.  */
  103. void idt_init(void)
  104. {
  105.     struct idescriptor *d;
  106.     int i;
  107.    
  108.     for (i = 0; i < IDT_ITEMS; i++) {
  109.         d = &idt[i];
  110.  
  111.         d->unused = 0;
  112.         d->selector = selector(KTEXT_DES);
  113.  
  114.         d->access = AR_PRESENT | AR_INTERRUPT;  /* masking interrupt */
  115.  
  116.         if (i == VECTOR_SYSCALL) {
  117.             /*
  118.              * The syscall interrupt gate must be calleable from userland.
  119.              */
  120.             d->access |= DPL_USER;
  121.         }
  122.        
  123.         idt_setoffset(d, ((__address) interrupt_handlers) + i*interrupt_handler_size);
  124.         trap_register(i, null_interrupt);
  125.     }
  126.     trap_register(13, gp_fault);
  127.     trap_register( 7, nm_fault);
  128.     trap_register(12, ss_fault);
  129. }
  130.  
  131.  
  132. void pm_init(void)
  133. {
  134.     struct descriptor *gdt_p = (struct descriptor *) gdtr.base;
  135.  
  136.     /*
  137.      * Each CPU has its private GDT and TSS.
  138.      * All CPUs share one IDT.
  139.      */
  140.  
  141.     if (config.cpu_active == 1) {
  142.         idt_init();
  143.         /*
  144.          * NOTE: bootstrap CPU has statically allocated TSS, because
  145.          * the heap hasn't been initialized so far.
  146.          */
  147.         tss_p = &tss;
  148.     }
  149.     else {
  150.         tss_p = (struct tss *) malloc(sizeof(struct tss));
  151.         if (!tss_p)
  152.             panic("could not allocate TSS\n");
  153.     }
  154.  
  155.     tss_initialize(tss_p);
  156.    
  157.     gdt_p[TSS_DES].access = AR_PRESENT | AR_TSS | DPL_KERNEL;
  158.     gdt_p[TSS_DES].special = 1;
  159.     gdt_p[TSS_DES].granularity = 1;
  160.    
  161.     gdt_setbase(&gdt_p[TSS_DES], (__address) tss_p);
  162.     gdt_setlimit(&gdt_p[TSS_DES], sizeof(struct tss) - 1);
  163.  
  164.     /*
  165.      * As of this moment, the current CPU has its own GDT pointing
  166.      * to its own TSS. We just need to load the TR register.
  167.      */
  168.     __asm__("ltr %0" : : "r" ((__u16) selector(TSS_DES)));
  169. }
  170.