Subversion Repositories HelenOS

Rev

Rev 3603 | Rev 3870 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2008 Jiri Svoboda
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup generic
  30.  * @{
  31.  */
  32.  
  33. /**
  34.  * @file
  35.  * @brief   Udebug operations.
  36.  *
  37.  * Udebug operations on tasks and threads are implemented here. The
  38.  * functions defined here are called from the udebug_ipc module
  39.  * when servicing udebug IPC messages.
  40.  */
  41.  
  42. #include <debug.h>
  43. #include <proc/task.h>
  44. #include <proc/thread.h>
  45. #include <arch.h>
  46. #include <errno.h>
  47. #include <syscall/copy.h>
  48. #include <ipc/ipc.h>
  49. #include <udebug/udebug.h>
  50. #include <udebug/udebug_ops.h>
  51.  
  52. /**
  53.  * Prepare a thread for a debugging operation.
  54.  *
  55.  * Simply put, return thread t with t->udebug.lock held,
  56.  * but only if it verifies all conditions.
  57.  *
  58.  * Specifically, verifies that thread t exists, is a userspace thread,
  59.  * and belongs to the current task (TASK). Verifies, that the thread
  60.  * is (or is not) go according to being_go (typically false).
  61.  * It also locks t->udebug.lock, making sure that t->udebug.active
  62.  * is true - that the thread is in a valid debugging session.
  63.  *
  64.  * With this verified and the t->udebug.lock mutex held, it is ensured
  65.  * that the thread cannot leave the debugging session, let alone cease
  66.  * to exist.
  67.  *
  68.  * In this function, holding the TASK->udebug.lock mutex prevents the
  69.  * thread from leaving the debugging session, while relaxing from
  70.  * the t->lock spinlock to the t->udebug.lock mutex.
  71.  *
  72.  * @param t     Pointer, need not at all be valid.
  73.  * @param being_go  Required thread state.
  74.  *
  75.  * Returns EOK if all went well, or an error code otherwise.
  76.  */
  77. static int _thread_op_begin(thread_t *t, bool being_go)
  78. {
  79.     task_id_t taskid;
  80.     ipl_t ipl;
  81.  
  82.     taskid = TASK->taskid;
  83.  
  84.     mutex_lock(&TASK->udebug.lock);
  85.  
  86.     /* thread_exists() must be called with threads_lock held */
  87.     ipl = interrupts_disable();
  88.     spinlock_lock(&threads_lock);
  89.  
  90.     if (!thread_exists(t)) {
  91.         spinlock_unlock(&threads_lock);
  92.         interrupts_restore(ipl);
  93.         mutex_unlock(&TASK->udebug.lock);
  94.         return ENOENT;
  95.     }
  96.  
  97.     /* t->lock is enough to ensure the thread's existence */
  98.     spinlock_lock(&t->lock);
  99.     spinlock_unlock(&threads_lock);
  100.  
  101.     /* Verify that 't' is a userspace thread. */
  102.     if ((t->flags & THREAD_FLAG_USPACE) == 0) {
  103.         /* It's not, deny its existence */
  104.         spinlock_unlock(&t->lock);
  105.         interrupts_restore(ipl);
  106.         mutex_unlock(&TASK->udebug.lock);
  107.         return ENOENT;
  108.     }
  109.  
  110.     /* Verify debugging state. */
  111.     if (t->udebug.active != true) {
  112.         /* Not in debugging session or undesired GO state */
  113.         spinlock_unlock(&t->lock);
  114.         interrupts_restore(ipl);
  115.         mutex_unlock(&TASK->udebug.lock);
  116.         return ENOENT;
  117.     }
  118.  
  119.     /*
  120.      * Since the thread has active == true, TASK->udebug.lock
  121.      * is enough to ensure its existence and that active remains
  122.      * true.
  123.      */
  124.     spinlock_unlock(&t->lock);
  125.     interrupts_restore(ipl);
  126.  
  127.     /* Only mutex TASK->udebug.lock left. */
  128.    
  129.     /* Now verify that the thread belongs to the current task. */
  130.     if (t->task != TASK) {
  131.         /* No such thread belonging this task*/
  132.         mutex_unlock(&TASK->udebug.lock);
  133.         return ENOENT;
  134.     }
  135.  
  136.     /*
  137.      * Now we need to grab the thread's debug lock for synchronization
  138.      * of the threads stoppability/stop state.
  139.      */
  140.     mutex_lock(&t->udebug.lock);
  141.  
  142.     /* The big task mutex is no longer needed. */
  143.     mutex_unlock(&TASK->udebug.lock);
  144.  
  145.     if (t->udebug.go != being_go) {
  146.         /* Not in debugging session or undesired GO state. */
  147.         mutex_unlock(&t->udebug.lock);
  148.         return EINVAL;
  149.     }
  150.  
  151.     /* Only t->udebug.lock left. */
  152.  
  153.     return EOK; /* All went well. */
  154. }
  155.  
  156. /** End debugging operation on a thread. */
  157. static void _thread_op_end(thread_t *t)
  158. {
  159.     mutex_unlock(&t->udebug.lock);
  160. }
  161.  
  162. /** Begin debugging the current task.
  163.  *
  164.  * Initiates a debugging session for the current task (and its threads).
  165.  * When the debugging session has started a reply will be sent to the
  166.  * UDEBUG_BEGIN call. This may happen immediately in this function if
  167.  * all the threads in this task are stoppable at the moment and in this
  168.  * case the function returns 1.
  169.  *
  170.  * Otherwise the function returns 0 and the reply will be sent as soon as
  171.  * all the threads become stoppable (i.e. they can be considered stopped).
  172.  *
  173.  * @param call  The BEGIN call we are servicing.
  174.  * @return  0 (OK, but not done yet), 1 (done) or negative error code.
  175.  */
  176. int udebug_begin(call_t *call)
  177. {
  178.     int reply;
  179.  
  180.     thread_t *t;
  181.     link_t *cur;
  182.  
  183.     LOG("udebug_begin()\n");
  184.  
  185.     mutex_lock(&TASK->udebug.lock);
  186.     LOG("debugging task %llu\n", TASK->taskid);
  187.  
  188.     if (TASK->udebug.dt_state != UDEBUG_TS_INACTIVE) {
  189.         mutex_unlock(&TASK->udebug.lock);
  190.         LOG("udebug_begin(): busy error\n");
  191.  
  192.         return EBUSY;
  193.     }
  194.  
  195.     TASK->udebug.dt_state = UDEBUG_TS_BEGINNING;
  196.     TASK->udebug.begin_call = call;
  197.     TASK->udebug.debugger = call->sender;
  198.  
  199.     if (TASK->udebug.not_stoppable_count == 0) {
  200.         TASK->udebug.dt_state = UDEBUG_TS_ACTIVE;
  201.         TASK->udebug.begin_call = NULL;
  202.         reply = 1; /* immediate reply */
  203.     } else {
  204.         reply = 0; /* no reply */
  205.     }
  206.    
  207.     /* Set udebug.active on all of the task's userspace threads. */
  208.  
  209.     for (cur = TASK->th_head.next; cur != &TASK->th_head; cur = cur->next) {
  210.         t = list_get_instance(cur, thread_t, th_link);
  211.  
  212.         mutex_lock(&t->udebug.lock);
  213.         if ((t->flags & THREAD_FLAG_USPACE) != 0)
  214.             t->udebug.active = true;
  215.         mutex_unlock(&t->udebug.lock);
  216.     }
  217.  
  218.     mutex_unlock(&TASK->udebug.lock);
  219.  
  220.     LOG("udebug_begin() done (%s)\n",
  221.         reply ? "reply" : "stoppability wait");
  222.  
  223.     return reply;
  224. }
  225.  
  226. /** Finish debugging the current task.
  227.  *
  228.  * Closes the debugging session for the current task.
  229.  * @return Zero on success or negative error code.
  230.  */
  231. int udebug_end(void)
  232. {
  233.     int rc;
  234.  
  235.     LOG("udebug_end()\n");
  236.  
  237.     mutex_lock(&TASK->udebug.lock);
  238.     LOG("task %" PRIu64 "\n", TASK->taskid);
  239.  
  240.     rc = udebug_task_cleanup(TASK);
  241.  
  242.     mutex_unlock(&TASK->udebug.lock);
  243.  
  244.     return rc;
  245. }
  246.  
  247. /** Set the event mask.
  248.  *
  249.  * Sets the event mask that determines which events are enabled.
  250.  *
  251.  * @param mask  Or combination of events that should be enabled.
  252.  * @return  Zero on success or negative error code.
  253.  */
  254. int udebug_set_evmask(udebug_evmask_t mask)
  255. {
  256.     LOG("udebug_set_mask()\n");
  257.  
  258.     mutex_lock(&TASK->udebug.lock);
  259.  
  260.     if (TASK->udebug.dt_state != UDEBUG_TS_ACTIVE) {
  261.         mutex_unlock(&TASK->udebug.lock);
  262.         LOG("udebug_set_mask(): not active debuging session\n");
  263.  
  264.         return EINVAL;
  265.     }
  266.  
  267.     TASK->udebug.evmask = mask;
  268.  
  269.     mutex_unlock(&TASK->udebug.lock);
  270.  
  271.     return 0;
  272. }
  273.  
  274. /** Give thread GO.
  275.  *
  276.  * Upon recieving a go message, the thread is given GO. Being GO
  277.  * means the thread is allowed to execute userspace code (until
  278.  * a debugging event or STOP occurs, at which point the thread loses GO.
  279.  *
  280.  * @param t The thread to operate on (unlocked and need not be valid).
  281.  * @param call  The GO call that we are servicing.
  282.  */
  283. int udebug_go(thread_t *t, call_t *call)
  284. {
  285.     int rc;
  286.  
  287.     /* On success, this will lock t->udebug.lock. */
  288.     rc = _thread_op_begin(t, false);
  289.     if (rc != EOK) {
  290.         return rc;
  291.     }
  292.  
  293.     t->udebug.go_call = call;
  294.     t->udebug.go = true;
  295.     t->udebug.cur_event = 0;    /* none */
  296.  
  297.     /*
  298.      * Neither t's lock nor threads_lock may be held during wakeup.
  299.      */
  300.     waitq_wakeup(&t->udebug.go_wq, WAKEUP_FIRST);
  301.  
  302.     _thread_op_end(t);
  303.  
  304.     return 0;
  305. }
  306.  
  307. /** Stop a thread (i.e. take its GO away)
  308.  *
  309.  * Generates a STOP event as soon as the thread becomes stoppable (i.e.
  310.  * can be considered stopped).
  311.  *
  312.  * @param t The thread to operate on (unlocked and need not be valid).
  313.  * @param call  The GO call that we are servicing.
  314.  */
  315. int udebug_stop(thread_t *t, call_t *call)
  316. {
  317.     int rc;
  318.  
  319.     LOG("udebug_stop()\n");
  320.  
  321.     /*
  322.      * On success, this will lock t->udebug.lock. Note that this makes sure
  323.      * the thread is not stopped.
  324.      */
  325.     rc = _thread_op_begin(t, true);
  326.     if (rc != EOK) {
  327.         return rc;
  328.     }
  329.  
  330.     /* Take GO away from the thread. */
  331.     t->udebug.go = false;
  332.  
  333.     if (t->udebug.stoppable != true) {
  334.         /* Answer will be sent when the thread becomes stoppable. */
  335.         _thread_op_end(t);
  336.         return 0;
  337.     }
  338.  
  339.     /*
  340.      * Answer GO call.
  341.      */
  342.     LOG("udebug_stop - answering go call\n");
  343.  
  344.     /* Make sure nobody takes this call away from us. */
  345.     call = t->udebug.go_call;
  346.     t->udebug.go_call = NULL;
  347.  
  348.     IPC_SET_RETVAL(call->data, 0);
  349.     IPC_SET_ARG1(call->data, UDEBUG_EVENT_STOP);
  350.     LOG("udebug_stop/ipc_answer\n");
  351.  
  352.     THREAD->udebug.cur_event = UDEBUG_EVENT_STOP;
  353.  
  354.     _thread_op_end(t);
  355.  
  356.     mutex_lock(&TASK->udebug.lock);
  357.     ipc_answer(&TASK->answerbox, call);
  358.     mutex_unlock(&TASK->udebug.lock);
  359.  
  360.     LOG("udebog_stop/done\n");
  361.     return 0;
  362. }
  363.  
  364. /** Read the list of userspace threads in the current task.
  365.  *
  366.  * The list takes the form of a sequence of thread hashes (i.e. the pointers
  367.  * to thread structures). A buffer of size @a buf_size is allocated and
  368.  * a pointer to it written to @a buffer. The sequence of hashes is written
  369.  * into this buffer.
  370.  *
  371.  * If the sequence is longer than @a buf_size bytes, only as much hashes
  372.  * as can fit are copied. The number of thread hashes copied is stored
  373.  * in @a n.
  374.  *
  375.  * The rationale for having @a buf_size is that this function is only
  376.  * used for servicing the THREAD_READ message, which always specifies
  377.  * a maximum size for the userspace buffer.
  378.  *
  379.  * @param buffer    The buffer for storing thread hashes.
  380.  * @param buf_size  Buffer size in bytes.
  381.  * @param n     The actual number of hashes copied will be stored here.
  382.  */
  383. int udebug_thread_read(void **buffer, size_t buf_size, size_t *n)
  384. {
  385.     thread_t *t;
  386.     link_t *cur;
  387.     unative_t tid;
  388.     unsigned copied_ids;
  389.     ipl_t ipl;
  390.     unative_t *id_buffer;
  391.     int flags;
  392.     size_t max_ids;
  393.  
  394.     LOG("udebug_thread_read()\n");
  395.  
  396.     /* Allocate a buffer to hold thread IDs */
  397.     id_buffer = malloc(buf_size, 0);
  398.  
  399.     mutex_lock(&TASK->udebug.lock);
  400.  
  401.     /* Verify task state */
  402.     if (TASK->udebug.dt_state != UDEBUG_TS_ACTIVE) {
  403.         mutex_unlock(&TASK->udebug.lock);
  404.         return EINVAL;
  405.     }
  406.  
  407.     ipl = interrupts_disable();
  408.     spinlock_lock(&TASK->lock);
  409.     /* Copy down the thread IDs */
  410.  
  411.     max_ids = buf_size / sizeof(unative_t);
  412.     copied_ids = 0;
  413.  
  414.     /* FIXME: make sure the thread isn't past debug shutdown... */
  415.     for (cur = TASK->th_head.next; cur != &TASK->th_head; cur = cur->next) {
  416.         /* Do not write past end of buffer */
  417.         if (copied_ids >= max_ids) break;
  418.  
  419.         t = list_get_instance(cur, thread_t, th_link);
  420.  
  421.         spinlock_lock(&t->lock);
  422.         flags = t->flags;
  423.         spinlock_unlock(&t->lock);
  424.  
  425.         /* Not interested in kernel threads. */
  426.         if ((flags & THREAD_FLAG_USPACE) != 0) {
  427.             /* Using thread struct pointer as identification hash */
  428.             tid = (unative_t) t;
  429.             id_buffer[copied_ids++] = tid;
  430.         }
  431.     }
  432.  
  433.     spinlock_unlock(&TASK->lock);
  434.     interrupts_restore(ipl);
  435.  
  436.     mutex_unlock(&TASK->udebug.lock);
  437.  
  438.     *buffer = id_buffer;
  439.     *n = copied_ids * sizeof(unative_t);
  440.  
  441.     return 0;
  442. }
  443.  
  444. /** Read the arguments of a system call.
  445.  *
  446.  * The arguments of the system call being being executed are copied
  447.  * to an allocated buffer and a pointer to it is written to @a buffer.
  448.  * The size of the buffer is exactly such that it can hold the maximum number
  449.  * of system-call arguments.
  450.  *
  451.  * Unless the thread is currently blocked in a SYSCALL_B or SYSCALL_E event,
  452.  * this function will fail with an EINVAL error code.
  453.  *
  454.  * @param buffer    The buffer for storing thread hashes.
  455.  */
  456. int udebug_args_read(thread_t *t, void **buffer)
  457. {
  458.     int rc;
  459.     unative_t *arg_buffer;
  460.  
  461.     /* Prepare a buffer to hold the arguments. */
  462.     arg_buffer = malloc(6 * sizeof(unative_t), 0);
  463.  
  464.     /* On success, this will lock t->udebug.lock. */
  465.     rc = _thread_op_begin(t, false);
  466.     if (rc != EOK) {
  467.         return rc;
  468.     }
  469.  
  470.     /* Additionally we need to verify that we are inside a syscall. */
  471.     if (t->udebug.cur_event != UDEBUG_EVENT_SYSCALL_B &&
  472.         t->udebug.cur_event != UDEBUG_EVENT_SYSCALL_E) {
  473.         _thread_op_end(t);
  474.         return EINVAL;
  475.     }
  476.  
  477.     /* Copy to a local buffer before releasing the lock. */
  478.     memcpy(arg_buffer, t->udebug.syscall_args, 6 * sizeof(unative_t));
  479.  
  480.     _thread_op_end(t);
  481.  
  482.     *buffer = arg_buffer;
  483.     return 0;
  484. }
  485.  
  486. /** Read the memory of the debugged task.
  487.  *
  488.  * Reads @a n bytes from the address space of the debugged task, starting
  489.  * from @a uspace_addr. The bytes are copied into an allocated buffer
  490.  * and a pointer to it is written into @a buffer.
  491.  *
  492.  * @param uspace_addr   Address from where to start reading.
  493.  * @param n     Number of bytes to read.
  494.  * @param buffer    For storing a pointer to the allocated buffer.
  495.  */
  496. int udebug_mem_read(unative_t uspace_addr, size_t n, void **buffer)
  497. {
  498.     void *data_buffer;
  499.     int rc;
  500.  
  501.     /* Verify task state */
  502.     mutex_lock(&TASK->udebug.lock);
  503.  
  504.     if (TASK->udebug.dt_state != UDEBUG_TS_ACTIVE) {
  505.         mutex_unlock(&TASK->udebug.lock);
  506.         return EBUSY;
  507.     }
  508.  
  509.     data_buffer = malloc(n, 0);
  510.  
  511.     /* NOTE: this is not strictly from a syscall... but that shouldn't
  512.      * be a problem */
  513.     rc = copy_from_uspace(data_buffer, (void *)uspace_addr, n);
  514.     mutex_unlock(&TASK->udebug.lock);
  515.  
  516.     if (rc != 0) return rc;
  517.  
  518.     *buffer = data_buffer;
  519.     return 0;
  520. }
  521.  
  522. /** @}
  523.  */
  524.