Subversion Repositories HelenOS

Rev

Rev 1849 | Go to most recent revision | Blame | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2006 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup sparc64
  30.  * @{
  31.  */
  32. /** @file
  33.  */
  34.  
  35. #ifndef KERN_sparc64_Z8530_H_
  36. #define KERN_sparc64_Z8530_H_
  37.  
  38. #include <arch/types.h>
  39. #include <typedefs.h>
  40. #include <arch/drivers/kbd.h>
  41.  
  42. #define Z8530_CHAN_A    4
  43. #define Z8530_CHAN_B    0
  44.  
  45. #define WR0 0
  46. #define WR1 1
  47. #define WR2 2
  48. #define WR3 3
  49. #define WR4 4
  50. #define WR5 5
  51. #define WR6 6
  52. #define WR7 7
  53. #define WR8 8
  54. #define WR9 9
  55. #define WR10    10
  56. #define WR11    11
  57. #define WR12    12
  58. #define WR13    13
  59. #define WR14    14
  60. #define WR15    15
  61.  
  62. #define RR0 0
  63. #define RR1 1
  64. #define RR2 2
  65. #define RR3 3
  66. #define RR8 8
  67. #define RR10    10
  68. #define RR12    12
  69. #define RR13    13
  70. #define RR14    14
  71. #define RR15    15
  72.  
  73. /* Write Register 0 */
  74. #define WR0_TX_IP_RST   (0x5<<3)    /** Reset pending TX interrupt. */
  75. #define WR0_ERR_RST (0x6<<3)
  76.  
  77. /* Write Register 1 */
  78. #define WR1_RID     (0x0<<3)    /** Receive Interrupts Disabled. */
  79. #define WR1_RIFCSC  (0x1<<3)    /** Receive Interrupt on First Character or Special Condition. */
  80. #define WR1_IARCSC  (0x2<<3)    /** Interrupt on All Receive Characters or Special Conditions. */
  81. #define WR1_RISC    (0x3<<3)    /** Receive Interrupt on Special Condition. */
  82. #define WR1_PISC    (0x1<<2)    /** Parity Is Special Condition. */
  83.  
  84. /* Write Register 3 */
  85. #define WR3_RX_ENABLE   (0x1<<0)    /** Rx Enable. */
  86. #define WR3_RX8BITSCH   (0x3<<6)    /** 8-bits per character. */
  87.  
  88. /* Write Register 9 */
  89. #define WR9_MIE     (0x1<<3)    /** Master Interrupt Enable. */
  90.  
  91. /* Read Register 0 */
  92. #define RR0_RCA     (0x1<<0)    /** Receive Character Available. */
  93.  
  94. static inline void z8530_write(index_t chan, uint8_t reg, uint8_t val)
  95. {
  96.     /*
  97.      * Registers 8-15 will automatically issue the Point High
  98.      * command as their bit 3 is 1.
  99.      */
  100.     kbd_virt_address[WR0+chan] = reg;   /* select register */
  101.     kbd_virt_address[WR0+chan] = val;   /* write value */
  102. }
  103.  
  104. static inline void z8530_write_a(uint8_t reg, uint8_t val)
  105. {
  106.     z8530_write(Z8530_CHAN_A, reg, val);
  107. }
  108. static inline void z8530_write_b(uint8_t reg, uint8_t val)
  109. {
  110.     z8530_write(Z8530_CHAN_B, reg, val);
  111. }
  112.  
  113. static inline uint8_t z8530_read(index_t chan, uint8_t reg)
  114. {
  115.     /*
  116.      * Registers 8-15 will automatically issue the Point High
  117.      * command as their bit 3 is 1.
  118.      */
  119.     kbd_virt_address[WR0+chan] = reg;   /* select register */
  120.     return kbd_virt_address[WR0+chan];
  121. }
  122.  
  123. static inline uint8_t z8530_read_a(uint8_t reg)
  124. {
  125.     return z8530_read(Z8530_CHAN_A, reg);
  126. }
  127. static inline uint8_t z8530_read_b(uint8_t reg)
  128. {
  129.     return z8530_read(Z8530_CHAN_B, reg);
  130. }
  131.  
  132. #endif
  133.  
  134. /** @}
  135.  */
  136.