Subversion Repositories HelenOS

Rev

Rev 3208 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2001-2005 Jakub Jermar
  3.  * Copyright (c) 2005 Sergey Bondari
  4.  * All rights reserved.
  5.  *
  6.  * Redistribution and use in source and binary forms, with or without
  7.  * modification, are permitted provided that the following conditions
  8.  * are met:
  9.  *
  10.  * - Redistributions of source code must retain the above copyright
  11.  *   notice, this list of conditions and the following disclaimer.
  12.  * - Redistributions in binary form must reproduce the above copyright
  13.  *   notice, this list of conditions and the following disclaimer in the
  14.  *   documentation and/or other materials provided with the distribution.
  15.  * - The name of the author may not be used to endorse or promote products
  16.  *   derived from this software without specific prior written permission.
  17.  *
  18.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  19.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  20.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  21.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  22.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  23.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  27.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28.  */
  29.  
  30. /** @addtogroup genericmm
  31.  * @{
  32.  */
  33.  
  34. /**
  35.  * @file
  36.  * @brief   Physical frame allocator.
  37.  *
  38.  * This file contains the physical frame allocator and memory zone management.
  39.  * The frame allocator is built on top of the buddy allocator.
  40.  *
  41.  * @see buddy.c
  42.  */
  43.  
  44. /*
  45.  * Locking order
  46.  *
  47.  * In order to access particular zone, the process must first lock
  48.  * the zones.lock, then lock the zone and then unlock the zones.lock.
  49.  * This insures, that we can fiddle with the zones in runtime without
  50.  * affecting the processes.
  51.  *
  52.  */
  53.  
  54. #include <arch/types.h>
  55. #include <mm/frame.h>
  56. #include <mm/as.h>
  57. #include <panic.h>
  58. #include <debug.h>
  59. #include <adt/list.h>
  60. #include <synch/spinlock.h>
  61. #include <synch/mutex.h>
  62. #include <synch/condvar.h>
  63. #include <arch/asm.h>
  64. #include <arch.h>
  65. #include <print.h>
  66. #include <align.h>
  67. #include <mm/slab.h>
  68. #include <bitops.h>
  69. #include <macros.h>
  70. #include <config.h>
  71.  
  72. typedef struct {
  73.     count_t refcount;   /**< tracking of shared frames  */
  74.     uint8_t buddy_order;    /**< buddy system block order */
  75.     link_t buddy_link;  /**< link to the next free block inside one
  76.                      order */
  77.     void *parent;           /**< If allocated by slab, this points there */
  78. } frame_t;
  79.  
  80. typedef struct {
  81.     SPINLOCK_DECLARE(lock); /**< this lock protects everything below */
  82.     pfn_t base;     /**< frame_no of the first frame in the frames
  83.                      array */
  84.     count_t count;          /**< Size of zone */
  85.  
  86.     frame_t *frames;    /**< array of frame_t structures in this
  87.                      zone */
  88.     count_t free_count; /**< number of free frame_t structures */
  89.     count_t busy_count; /**< number of busy frame_t structures */
  90.    
  91.     buddy_system_t *buddy_system; /**< buddy system for the zone */
  92.     int flags;
  93. } zone_t;
  94.  
  95. /*
  96.  * The zoneinfo.lock must be locked when accessing zoneinfo structure.
  97.  * Some of the attributes in zone_t structures are 'read-only'
  98.  */
  99.  
  100. typedef struct {
  101.     SPINLOCK_DECLARE(lock);
  102.     unsigned int count;
  103.     zone_t *info[ZONES_MAX];
  104. } zones_t;
  105.  
  106. static zones_t zones;
  107.  
  108. /*
  109.  * Synchronization primitives used to sleep when there is no memory
  110.  * available.
  111.  */
  112. mutex_t mem_avail_mtx;
  113. condvar_t mem_avail_cv;
  114. unsigned long mem_avail_frames = 0; /**< Number of available frames. */
  115. unsigned long mem_avail_gen = 0;    /**< Generation counter. */
  116.  
  117. /********************/
  118. /* Helper functions */
  119. /********************/
  120.  
  121. static inline index_t frame_index(zone_t *zone, frame_t *frame)
  122. {
  123.     return (index_t) (frame - zone->frames);
  124. }
  125.  
  126. static inline index_t frame_index_abs(zone_t *zone, frame_t *frame)
  127. {
  128.     return (index_t) (frame - zone->frames) + zone->base;
  129. }
  130.  
  131. static inline int frame_index_valid(zone_t *zone, index_t index)
  132. {
  133.     return (index < zone->count);
  134. }
  135.  
  136. /** Compute pfn_t from frame_t pointer & zone pointer */
  137. static index_t make_frame_index(zone_t *zone, frame_t *frame)
  138. {
  139.     return (frame - zone->frames);
  140. }
  141.  
  142. /** Initialize frame structure.
  143.  *
  144.  * @param frame     Frame structure to be initialized.
  145.  */
  146. static void frame_initialize(frame_t *frame)
  147. {
  148.     frame->refcount = 1;
  149.     frame->buddy_order = 0;
  150. }
  151.  
  152. /**********************/
  153. /* Zoneinfo functions */
  154. /**********************/
  155.  
  156. /** Insert-sort zone into zones list.
  157.  *
  158.  * @param newzone   New zone to be inserted into zone list.
  159.  * @return      Zone number on success, -1 on error.
  160.  */
  161. static int zones_add_zone(zone_t *newzone)
  162. {
  163.     unsigned int i, j;
  164.     ipl_t ipl;
  165.     zone_t *z;
  166.  
  167.     ipl = interrupts_disable();
  168.     spinlock_lock(&zones.lock);
  169.    
  170.     /* Try to merge */
  171.     if (zones.count + 1 == ZONES_MAX) {
  172.         printf("Maximum zone count %u exceeded!\n", ZONES_MAX);
  173.         spinlock_unlock(&zones.lock);
  174.         interrupts_restore(ipl);
  175.         return -1;
  176.     }
  177.    
  178.     for (i = 0; i < zones.count; i++) {
  179.         /* Check for overflow */
  180.         z = zones.info[i];
  181.         if (overlaps(newzone->base, newzone->count, z->base,
  182.             z->count)) {
  183.             printf("Zones overlap!\n");
  184.             return -1;
  185.         }
  186.         if (newzone->base < z->base)
  187.             break;
  188.     }
  189.    
  190.     /* Move other zones up */
  191.     for (j = i; j < zones.count; j++)
  192.         zones.info[j + 1] = zones.info[j];
  193.    
  194.     zones.info[i] = newzone;
  195.     zones.count++;
  196.    
  197.     spinlock_unlock(&zones.lock);
  198.     interrupts_restore(ipl);
  199.  
  200.     return i;
  201. }
  202.  
  203. /** Try to find a zone where can we find the frame.
  204.  *
  205.  * Assume interrupts are disabled.
  206.  *
  207.  * @param frame     Frame number contained in zone.
  208.  * @param pzone     If not null, it is used as zone hint. Zone index is
  209.  *          filled into the variable on success.
  210.  * @return      Pointer to locked zone containing frame.
  211.  */
  212. static zone_t *find_zone_and_lock(pfn_t frame, unsigned int *pzone)
  213. {
  214.     unsigned int i;
  215.     unsigned int hint = pzone ? *pzone : 0;
  216.     zone_t *z;
  217.    
  218.     spinlock_lock(&zones.lock);
  219.  
  220.     if (hint >= zones.count)
  221.         hint = 0;
  222.    
  223.     i = hint;
  224.     do {
  225.         z = zones.info[i];
  226.         spinlock_lock(&z->lock);
  227.         if (z->base <= frame && z->base + z->count > frame) {
  228.             /* Unlock the global lock */
  229.             spinlock_unlock(&zones.lock);
  230.             if (pzone)
  231.                 *pzone = i;
  232.             return z;
  233.         }
  234.         spinlock_unlock(&z->lock);
  235.  
  236.         i++;
  237.         if (i >= zones.count)
  238.             i = 0;
  239.     } while (i != hint);
  240.  
  241.     spinlock_unlock(&zones.lock);
  242.     return NULL;
  243. }
  244.  
  245. /** @return True if zone can allocate specified order */
  246. static int zone_can_alloc(zone_t *z, uint8_t order)
  247. {
  248.     return buddy_system_can_alloc(z->buddy_system, order);
  249. }
  250.  
  251. /** Find and lock zone that can allocate order frames.
  252.  *
  253.  * Assume interrupts are disabled.
  254.  *
  255.  * @param order     Size (2^order) of free space we are trying to find.
  256.  * @param flags     Required flags of the target zone.
  257.  * @param pzone     Pointer to preferred zone or NULL, on return contains
  258.  *          zone number.
  259.  */
  260. static zone_t *
  261. find_free_zone_and_lock(uint8_t order, int flags, unsigned int *pzone)
  262. {
  263.     unsigned int i;
  264.     zone_t *z;
  265.     unsigned int hint = pzone ? *pzone : 0;
  266.    
  267.     /* Mask off flags that are not applicable. */
  268.     flags &= FRAME_LOW_4_GiB;
  269.  
  270.     spinlock_lock(&zones.lock);
  271.     if (hint >= zones.count)
  272.         hint = 0;
  273.     i = hint;
  274.     do {
  275.         z = zones.info[i];
  276.        
  277.         spinlock_lock(&z->lock);
  278.  
  279.         /*
  280.          * Check whether the zone meets the search criteria.
  281.          */
  282.         if ((z->flags & flags) == flags) {
  283.             /*
  284.              * Check if the zone has 2^order frames area available.
  285.              */
  286.             if (zone_can_alloc(z, order)) {
  287.                 spinlock_unlock(&zones.lock);
  288.                 if (pzone)
  289.                     *pzone = i;
  290.                 return z;
  291.             }
  292.         }
  293.         spinlock_unlock(&z->lock);
  294.         if (++i >= zones.count)
  295.             i = 0;
  296.     } while (i != hint);
  297.     spinlock_unlock(&zones.lock);
  298.     return NULL;
  299. }
  300.  
  301. /**************************/
  302. /* Buddy system functions */
  303. /**************************/
  304.  
  305. /** Buddy system find_block implementation.
  306.  *
  307.  * Find block that is parent of current list.
  308.  * That means go to lower addresses, until such block is found
  309.  *
  310.  * @param order     Order of parent must be different then this
  311.  *          parameter!!
  312.  */
  313. static link_t *zone_buddy_find_block(buddy_system_t *b, link_t *child,
  314.     uint8_t order)
  315. {
  316.     frame_t *frame;
  317.     zone_t *zone;
  318.     index_t index;
  319.    
  320.     frame = list_get_instance(child, frame_t, buddy_link);
  321.     zone = (zone_t *) b->data;
  322.  
  323.     index = frame_index(zone, frame);
  324.     do {
  325.         if (zone->frames[index].buddy_order != order) {
  326.             return &zone->frames[index].buddy_link;
  327.         }
  328.     } while(index-- > 0);
  329.     return NULL;
  330. }
  331.  
  332. /** Buddy system find_buddy implementation.
  333.  *
  334.  * @param b     Buddy system.
  335.  * @param block     Block for which buddy should be found.
  336.  *
  337.  * @return      Buddy for given block if found.
  338.  */
  339. static link_t *zone_buddy_find_buddy(buddy_system_t *b, link_t *block)
  340. {
  341.     frame_t *frame;
  342.     zone_t *zone;
  343.     index_t index;
  344.     bool is_left, is_right;
  345.  
  346.     frame = list_get_instance(block, frame_t, buddy_link);
  347.     zone = (zone_t *) b->data;
  348.     ASSERT(IS_BUDDY_ORDER_OK(frame_index_abs(zone, frame),
  349.         frame->buddy_order));
  350.    
  351.     is_left = IS_BUDDY_LEFT_BLOCK_ABS(zone, frame);
  352.     is_right = IS_BUDDY_RIGHT_BLOCK_ABS(zone, frame);
  353.  
  354.     ASSERT(is_left ^ is_right);
  355.     if (is_left) {
  356.         index = (frame_index(zone, frame)) +
  357.             (1 << frame->buddy_order);
  358.     } else {    /* if (is_right) */
  359.         index = (frame_index(zone, frame)) -
  360.             (1 << frame->buddy_order);
  361.     }
  362.    
  363.     if (frame_index_valid(zone, index)) {
  364.         if (zone->frames[index].buddy_order == frame->buddy_order &&
  365.             zone->frames[index].refcount == 0) {
  366.             return &zone->frames[index].buddy_link;
  367.         }
  368.     }
  369.  
  370.     return NULL;   
  371. }
  372.  
  373. /** Buddy system bisect implementation.
  374.  *
  375.  * @param b     Buddy system.
  376.  * @param block     Block to bisect.
  377.  *
  378.  * @return      Right block.
  379.  */
  380. static link_t *zone_buddy_bisect(buddy_system_t *b, link_t *block)
  381. {
  382.     frame_t *frame_l, *frame_r;
  383.  
  384.     frame_l = list_get_instance(block, frame_t, buddy_link);
  385.     frame_r = (frame_l + (1 << (frame_l->buddy_order - 1)));
  386.    
  387.     return &frame_r->buddy_link;
  388. }
  389.  
  390. /** Buddy system coalesce implementation.
  391.  *
  392.  * @param b     Buddy system.
  393.  * @param block_1   First block.
  394.  * @param block_2   First block's buddy.
  395.  *
  396.  * @return      Coalesced block (actually block that represents lower
  397.  *          address).
  398.  */
  399. static link_t *zone_buddy_coalesce(buddy_system_t *b, link_t *block_1,
  400.     link_t *block_2)
  401. {
  402.     frame_t *frame1, *frame2;
  403.    
  404.     frame1 = list_get_instance(block_1, frame_t, buddy_link);
  405.     frame2 = list_get_instance(block_2, frame_t, buddy_link);
  406.    
  407.     return frame1 < frame2 ? block_1 : block_2;
  408. }
  409.  
  410. /** Buddy system set_order implementation.
  411.  *
  412.  * @param b     Buddy system.
  413.  * @param block     Buddy system block.
  414.  * @param order     Order to set.
  415.  */
  416. static void zone_buddy_set_order(buddy_system_t *b, link_t *block,
  417.     uint8_t order)
  418. {
  419.     frame_t *frame;
  420.     frame = list_get_instance(block, frame_t, buddy_link);
  421.     frame->buddy_order = order;
  422. }
  423.  
  424. /** Buddy system get_order implementation.
  425.  *
  426.  * @param b     Buddy system.
  427.  * @param block     Buddy system block.
  428.  *
  429.  * @return      Order of block.
  430.  */
  431. static uint8_t zone_buddy_get_order(buddy_system_t *b, link_t *block)
  432. {
  433.     frame_t *frame;
  434.     frame = list_get_instance(block, frame_t, buddy_link);
  435.     return frame->buddy_order;
  436. }
  437.  
  438. /** Buddy system mark_busy implementation.
  439.  *
  440.  * @param b     Buddy system.
  441.  * @param block     Buddy system block.
  442.  */
  443. static void zone_buddy_mark_busy(buddy_system_t *b, link_t * block)
  444. {
  445.     frame_t * frame;
  446.  
  447.     frame = list_get_instance(block, frame_t, buddy_link);
  448.     frame->refcount = 1;
  449. }
  450.  
  451. /** Buddy system mark_available implementation.
  452.  *
  453.  * @param b     Buddy system.
  454.  * @param block     Buddy system block.
  455.  */
  456. static void zone_buddy_mark_available(buddy_system_t *b, link_t *block)
  457. {
  458.     frame_t *frame;
  459.     frame = list_get_instance(block, frame_t, buddy_link);
  460.     frame->refcount = 0;
  461. }
  462.  
  463. static buddy_system_operations_t zone_buddy_system_operations = {
  464.     .find_buddy = zone_buddy_find_buddy,
  465.     .bisect = zone_buddy_bisect,
  466.     .coalesce = zone_buddy_coalesce,
  467.     .set_order = zone_buddy_set_order,
  468.     .get_order = zone_buddy_get_order,
  469.     .mark_busy = zone_buddy_mark_busy,
  470.     .mark_available = zone_buddy_mark_available,
  471.     .find_block = zone_buddy_find_block
  472. };
  473.  
  474. /******************/
  475. /* Zone functions */
  476. /******************/
  477.  
  478. /** Allocate frame in particular zone.
  479.  *
  480.  * Assume zone is locked.
  481.  * Panics if allocation is impossible.
  482.  *
  483.  * @param zone      Zone to allocate from.
  484.  * @param order     Allocate exactly 2^order frames.
  485.  *
  486.  * @return      Frame index in zone.
  487.  *
  488.  */
  489. static pfn_t zone_frame_alloc(zone_t *zone, uint8_t order)
  490. {
  491.     pfn_t v;
  492.     link_t *tmp;
  493.     frame_t *frame;
  494.  
  495.     /* Allocate frames from zone buddy system */
  496.     tmp = buddy_system_alloc(zone->buddy_system, order);
  497.    
  498.     ASSERT(tmp);
  499.    
  500.     /* Update zone information. */
  501.     zone->free_count -= (1 << order);
  502.     zone->busy_count += (1 << order);
  503.  
  504.     /* Frame will be actually a first frame of the block. */
  505.     frame = list_get_instance(tmp, frame_t, buddy_link);
  506.    
  507.     /* get frame address */
  508.     v = make_frame_index(zone, frame);
  509.     return v;
  510. }
  511.  
  512. /** Free frame from zone.
  513.  *
  514.  * Assume zone is locked.
  515.  *
  516.  * @param zone      Pointer to zone from which the frame is to be freed.
  517.  * @param frame_idx Frame index relative to zone.
  518.  */
  519. static void zone_frame_free(zone_t *zone, index_t frame_idx)
  520. {
  521.     frame_t *frame;
  522.     uint8_t order;
  523.  
  524.     frame = &zone->frames[frame_idx];
  525.    
  526.     /* remember frame order */
  527.     order = frame->buddy_order;
  528.  
  529.     ASSERT(frame->refcount);
  530.  
  531.     if (!--frame->refcount) {
  532.         buddy_system_free(zone->buddy_system, &frame->buddy_link);
  533.    
  534.         /* Update zone information. */
  535.         zone->free_count += (1 << order);
  536.         zone->busy_count -= (1 << order);
  537.     }
  538. }
  539.  
  540. /** Return frame from zone. */
  541. static frame_t *zone_get_frame(zone_t *zone, index_t frame_idx)
  542. {
  543.     ASSERT(frame_idx < zone->count);
  544.     return &zone->frames[frame_idx];
  545. }
  546.  
  547. /** Mark frame in zone unavailable to allocation. */
  548. static void zone_mark_unavailable(zone_t *zone, index_t frame_idx)
  549. {
  550.     frame_t *frame;
  551.     link_t *link;
  552.  
  553.     frame = zone_get_frame(zone, frame_idx);
  554.     if (frame->refcount)
  555.         return;
  556.     link = buddy_system_alloc_block(zone->buddy_system,
  557.         &frame->buddy_link);
  558.     ASSERT(link);
  559.     zone->free_count--;
  560.  
  561.     mutex_lock(&mem_avail_mtx);
  562.     mem_avail_frames--;
  563.     mutex_unlock(&mem_avail_mtx);
  564. }
  565.  
  566. /** Join two zones.
  567.  *
  568.  * Expect zone_t *z to point to space at least zone_conf_size large.
  569.  *
  570.  * Assume z1 & z2 are locked.
  571.  *
  572.  * @param z     Target zone structure pointer.
  573.  * @param z1        Zone to merge.
  574.  * @param z2        Zone to merge.
  575.  */
  576. static void _zone_merge(zone_t *z, zone_t *z1, zone_t *z2)
  577. {
  578.     uint8_t max_order;
  579.     unsigned int i;
  580.     int z2idx;
  581.     pfn_t frame_idx;
  582.     frame_t *frame;
  583.  
  584.     ASSERT(!overlaps(z1->base, z1->count, z2->base, z2->count));
  585.     ASSERT(z1->base < z2->base);
  586.  
  587.     spinlock_initialize(&z->lock, "zone_lock");
  588.     z->base = z1->base;
  589.     z->count = z2->base + z2->count - z1->base;
  590.     z->flags = z1->flags & z2->flags;
  591.  
  592.     z->free_count = z1->free_count + z2->free_count;
  593.     z->busy_count = z1->busy_count + z2->busy_count;
  594.    
  595.     max_order = fnzb(z->count);
  596.  
  597.     z->buddy_system = (buddy_system_t *) &z[1];
  598.     buddy_system_create(z->buddy_system, max_order,
  599.         &zone_buddy_system_operations, (void *) z);
  600.  
  601.     z->frames = (frame_t *)((uint8_t *) z->buddy_system +
  602.         buddy_conf_size(max_order));
  603.     for (i = 0; i < z->count; i++) {
  604.         /* This marks all frames busy */
  605.         frame_initialize(&z->frames[i]);
  606.     }
  607.     /* Copy frames from both zones to preserve full frame orders,
  608.      * parents etc. Set all free frames with refcount=0 to 1, because
  609.      * we add all free frames to buddy allocator later again, clear
  610.      * order to 0. Don't set busy frames with refcount=0, as they
  611.      * will not be reallocated during merge and it would make later
  612.      * problems with allocation/free.
  613.      */
  614.     for (i = 0; i < z1->count; i++)
  615.         z->frames[i] = z1->frames[i];
  616.     for (i = 0; i < z2->count; i++) {
  617.         z2idx = i + (z2->base - z1->base);
  618.         z->frames[z2idx] = z2->frames[i];
  619.     }
  620.     i = 0;
  621.     while (i < z->count) {
  622.         if (z->frames[i].refcount) {
  623.             /* skip busy frames */
  624.             i += 1 << z->frames[i].buddy_order;
  625.         } else { /* Free frames, set refcount=1 */
  626.             /* All free frames have refcount=0, we need not
  627.              * to check the order */
  628.             z->frames[i].refcount = 1;
  629.             z->frames[i].buddy_order = 0;
  630.             i++;
  631.         }
  632.     }
  633.     /* Add free blocks from the 2 original zones */
  634.     while (zone_can_alloc(z1, 0)) {
  635.         frame_idx = zone_frame_alloc(z1, 0);
  636.         frame = &z->frames[frame_idx];
  637.         frame->refcount = 0;
  638.         buddy_system_free(z->buddy_system, &frame->buddy_link);
  639.     }
  640.     while (zone_can_alloc(z2, 0)) {
  641.         frame_idx = zone_frame_alloc(z2, 0);
  642.         frame = &z->frames[frame_idx + (z2->base - z1->base)];
  643.         frame->refcount = 0;
  644.         buddy_system_free(z->buddy_system, &frame->buddy_link);
  645.     }
  646. }
  647.  
  648. /** Return old configuration frames into the zone.
  649.  *
  650.  * We have several cases
  651.  * - the conf. data is outside of zone -> exit, shall we call frame_free??
  652.  * - the conf. data was created by zone_create or
  653.  *   updated with reduce_region -> free every frame
  654.  *
  655.  * @param newzone   The actual zone where freeing should occur.
  656.  * @param oldzone   Pointer to old zone configuration data that should
  657.  *          be freed from new zone.
  658.  */
  659. static void return_config_frames(zone_t *newzone, zone_t *oldzone)
  660. {
  661.     pfn_t pfn;
  662.     frame_t *frame;
  663.     count_t cframes;
  664.     unsigned int i;
  665.  
  666.     pfn = ADDR2PFN((uintptr_t)KA2PA(oldzone));
  667.     cframes = SIZE2FRAMES(zone_conf_size(oldzone->count));
  668.    
  669.     if (pfn < newzone->base || pfn >= newzone->base + newzone->count)
  670.         return;
  671.  
  672.     frame = &newzone->frames[pfn - newzone->base];
  673.     ASSERT(!frame->buddy_order);
  674.  
  675.     for (i = 0; i < cframes; i++) {
  676.         newzone->busy_count++;
  677.         zone_frame_free(newzone, pfn+i-newzone->base);
  678.     }
  679. }
  680.  
  681. /** Reduce allocated block to count of order 0 frames.
  682.  *
  683.  * The allocated block need 2^order frames of space. Reduce all frames
  684.  * in block to order 0 and free the unneeded frames. This means, that
  685.  * when freeing the previously allocated block starting with frame_idx,
  686.  * you have to free every frame.
  687.  *
  688.  * @param zone
  689.  * @param frame_idx     Index to block.
  690.  * @param count         Allocated space in block.
  691.  */
  692. static void zone_reduce_region(zone_t *zone, pfn_t frame_idx, count_t count)
  693. {
  694.     count_t i;
  695.     uint8_t order;
  696.     frame_t *frame;
  697.    
  698.     ASSERT(frame_idx + count < zone->count);
  699.  
  700.     order = zone->frames[frame_idx].buddy_order;
  701.     ASSERT((count_t) (1 << order) >= count);
  702.  
  703.     /* Reduce all blocks to order 0 */
  704.     for (i = 0; i < (count_t) (1 << order); i++) {
  705.         frame = &zone->frames[i + frame_idx];
  706.         frame->buddy_order = 0;
  707.         if (!frame->refcount)
  708.             frame->refcount = 1;
  709.         ASSERT(frame->refcount == 1);
  710.     }
  711.     /* Free unneeded frames */
  712.     for (i = count; i < (count_t) (1 << order); i++) {
  713.         zone_frame_free(zone, i + frame_idx);
  714.     }
  715. }
  716.  
  717. /** Merge zones z1 and z2.
  718.  *
  719.  * - the zones must be 2 zones with no zone existing in between,
  720.  *   which means that z2 = z1+1
  721.  *
  722.  * - When you create a new zone, the frame allocator configuration does
  723.  *   not to be 2^order size. Once the allocator is running it is no longer
  724.  *   possible, merged configuration data occupies more space :-/
  725.  */
  726. void zone_merge(unsigned int z1, unsigned int z2)
  727. {
  728.     ipl_t ipl;
  729.     zone_t *zone1, *zone2, *newzone;
  730.     unsigned int cframes;
  731.     uint8_t order;
  732.     unsigned int i;
  733.     pfn_t pfn;
  734.  
  735.     ipl = interrupts_disable();
  736.     spinlock_lock(&zones.lock);
  737.  
  738.     if ((z1 >= zones.count) || (z2 >= zones.count))
  739.         goto errout;
  740.     /* We can join only 2 zones with none existing inbetween */
  741.     if (z2 - z1 != 1)
  742.         goto errout;
  743.  
  744.     zone1 = zones.info[z1];
  745.     zone2 = zones.info[z2];
  746.     spinlock_lock(&zone1->lock);
  747.     spinlock_lock(&zone2->lock);
  748.  
  749.     cframes = SIZE2FRAMES(zone_conf_size(zone2->base + zone2->count -
  750.         zone1->base));
  751.     if (cframes == 1)
  752.         order = 0;
  753.     else
  754.         order = fnzb(cframes - 1) + 1;
  755.  
  756.     /* Allocate zonedata inside one of the zones */
  757.     if (zone_can_alloc(zone1, order))
  758.         pfn = zone1->base + zone_frame_alloc(zone1, order);
  759.     else if (zone_can_alloc(zone2, order))
  760.         pfn = zone2->base + zone_frame_alloc(zone2, order);
  761.     else
  762.         goto errout2;
  763.  
  764.     newzone = (zone_t *) PA2KA(PFN2ADDR(pfn));
  765.  
  766.     _zone_merge(newzone, zone1, zone2);
  767.  
  768.     /* Free unneeded config frames */
  769.     zone_reduce_region(newzone, pfn - newzone->base,  cframes);
  770.     /* Subtract zone information from busy frames */
  771.     newzone->busy_count -= cframes;
  772.  
  773.     /* Replace existing zones in zoneinfo list */
  774.     zones.info[z1] = newzone;
  775.     for (i = z2 + 1; i < zones.count; i++)
  776.         zones.info[i - 1] = zones.info[i];
  777.     zones.count--;
  778.  
  779.     /* Free old zone information */
  780.     return_config_frames(newzone, zone1);
  781.     return_config_frames(newzone, zone2);
  782. errout2:
  783.     /* Nobody is allowed to enter to zone, so we are safe
  784.      * to touch the spinlocks last time */
  785.     spinlock_unlock(&zone1->lock);
  786.     spinlock_unlock(&zone2->lock);
  787. errout:
  788.     spinlock_unlock(&zones.lock);
  789.     interrupts_restore(ipl);
  790. }
  791.  
  792. /** Merge all zones into one big zone.
  793.  *
  794.  * It is reasonable to do this on systems whose bios reports parts in chunks,
  795.  * so that we could have 1 zone (it's faster).
  796.  */
  797. void zone_merge_all(void)
  798. {
  799.     int count = zones.count;
  800.  
  801.     while (zones.count > 1 && --count) {
  802.         zone_merge(0, 1);
  803.         break;
  804.     }
  805. }
  806.  
  807. /** Create new frame zone.
  808.  *
  809.  * @param start     Physical address of the first frame within the zone.
  810.  * @param count     Count of frames in zone.
  811.  * @param z     Address of configuration information of zone.
  812.  * @param flags     Zone flags.
  813.  *
  814.  * @return      Initialized zone.
  815.  */
  816. static void zone_construct(pfn_t start, count_t count, zone_t *z, int flags)
  817. {
  818.     unsigned int i;
  819.     uint8_t max_order;
  820.  
  821.     spinlock_initialize(&z->lock, "zone_lock");
  822.     z->base = start;
  823.     z->count = count;
  824.  
  825.     /* Mask off flags that are calculated automatically. */
  826.     flags &= ~FRAME_LOW_4_GiB;
  827.     /* Determine calculated flags. */
  828.     if (z->base + count < (1ULL << (32 - FRAME_WIDTH))) /* 4 GiB */
  829.         flags |= FRAME_LOW_4_GiB;
  830.  
  831.     z->flags = flags;
  832.  
  833.     z->free_count = count;
  834.     z->busy_count = 0;
  835.  
  836.     /*
  837.      * Compute order for buddy system, initialize
  838.      */
  839.     max_order = fnzb(count);
  840.     z->buddy_system = (buddy_system_t *)&z[1];
  841.    
  842.     buddy_system_create(z->buddy_system, max_order,
  843.         &zone_buddy_system_operations, (void *) z);
  844.    
  845.     /* Allocate frames _after_ the conframe */
  846.     /* Check sizes */
  847.     z->frames = (frame_t *)((uint8_t *) z->buddy_system +
  848.         buddy_conf_size(max_order));
  849.     for (i = 0; i < count; i++) {
  850.         frame_initialize(&z->frames[i]);
  851.     }
  852.    
  853.     /* Stuffing frames */
  854.     for (i = 0; i < count; i++) {
  855.         z->frames[i].refcount = 0;
  856.         buddy_system_free(z->buddy_system, &z->frames[i].buddy_link);
  857.     }
  858. }
  859.  
  860. /** Compute configuration data size for zone.
  861.  *
  862.  * @param count     Size of zone in frames.
  863.  * @return      Size of zone configuration info (in bytes).
  864.  */
  865. uintptr_t zone_conf_size(count_t count)
  866. {
  867.     int size = sizeof(zone_t) + count * sizeof(frame_t);
  868.     int max_order;
  869.  
  870.     max_order = fnzb(count);
  871.     size += buddy_conf_size(max_order);
  872.     return size;
  873. }
  874.  
  875. /** Create and add zone to system.
  876.  *
  877.  * @param start     First frame number (absolute).
  878.  * @param count     Size of zone in frames.
  879.  * @param confframe Where configuration frames are supposed to be.
  880.  *          Automatically checks, that we will not disturb the
  881.  *          kernel and possibly init.  If confframe is given
  882.  *          _outside_ this zone, it is expected, that the area is
  883.  *          already marked BUSY and big enough to contain
  884.  *          zone_conf_size() amount of data.  If the confframe is
  885.  *          inside the area, the zone free frame information is
  886.  *          modified not to include it.
  887.  *
  888.  * @return      Zone number or -1 on error.
  889.  */
  890. int zone_create(pfn_t start, count_t count, pfn_t confframe, int flags)
  891. {
  892.     zone_t *z;
  893.     uintptr_t addr;
  894.     count_t confcount;
  895.     unsigned int i;
  896.     int znum;
  897.  
  898.     /* Theoretically we could have here 0, practically make sure
  899.      * nobody tries to do that. If some platform requires, remove
  900.      * the assert
  901.      */
  902.     ASSERT(confframe);
  903.     /* If conframe is supposed to be inside our zone, then make sure
  904.      * it does not span kernel & init
  905.      */
  906.     confcount = SIZE2FRAMES(zone_conf_size(count));
  907.     if (confframe >= start && confframe < start + count) {
  908.         for (; confframe < start + count; confframe++) {
  909.             addr = PFN2ADDR(confframe);
  910.             if (overlaps(addr, PFN2ADDR(confcount),
  911.                 KA2PA(config.base), config.kernel_size))
  912.                 continue;
  913.            
  914.             if (overlaps(addr, PFN2ADDR(confcount),
  915.                 KA2PA(config.stack_base), config.stack_size))
  916.                 continue;
  917.            
  918.             bool overlap = false;
  919.             count_t i;
  920.             for (i = 0; i < init.cnt; i++)
  921.                 if (overlaps(addr, PFN2ADDR(confcount),
  922.                     KA2PA(init.tasks[i].addr),
  923.                     init.tasks[i].size)) {
  924.                     overlap = true;
  925.                     break;
  926.                 }
  927.             if (overlap)
  928.                 continue;
  929.            
  930.             break;
  931.         }
  932.         if (confframe >= start + count)
  933.             panic("Cannot find configuration data for zone.");
  934.     }
  935.  
  936.     z = (zone_t *) PA2KA(PFN2ADDR(confframe));
  937.     zone_construct(start, count, z, flags);
  938.     znum = zones_add_zone(z);
  939.     if (znum == -1)
  940.         return -1;
  941.  
  942.     mutex_lock(&mem_avail_mtx);
  943.     mem_avail_frames += count;
  944.     mutex_unlock(&mem_avail_mtx);
  945.  
  946.     /* If confdata in zone, mark as unavailable */
  947.     if (confframe >= start && confframe < start + count)
  948.         for (i = confframe; i < confframe + confcount; i++) {
  949.             zone_mark_unavailable(z, i - z->base);
  950.         }
  951.    
  952.     return znum;
  953. }
  954.  
  955. /***************************************/
  956. /* Frame functions */
  957.  
  958. /** Set parent of frame. */
  959. void frame_set_parent(pfn_t pfn, void *data, unsigned int hint)
  960. {
  961.     zone_t *zone = find_zone_and_lock(pfn, &hint);
  962.  
  963.     ASSERT(zone);
  964.  
  965.     zone_get_frame(zone, pfn - zone->base)->parent = data;
  966.     spinlock_unlock(&zone->lock);
  967. }
  968.  
  969. void *frame_get_parent(pfn_t pfn, unsigned int hint)
  970. {
  971.     zone_t *zone = find_zone_and_lock(pfn, &hint);
  972.     void *res;
  973.  
  974.     ASSERT(zone);
  975.     res = zone_get_frame(zone, pfn - zone->base)->parent;
  976.    
  977.     spinlock_unlock(&zone->lock);
  978.     return res;
  979. }
  980.  
  981. /** Allocate power-of-two frames of physical memory.
  982.  *
  983.  * @param order     Allocate exactly 2^order frames.
  984.  * @param flags     Flags for host zone selection and address processing.
  985.  * @param pzone     Preferred zone.
  986.  *
  987.  * @return      Physical address of the allocated frame.
  988.  *
  989.  */
  990. void *frame_alloc_generic(uint8_t order, int flags, unsigned int *pzone)
  991. {
  992.     ipl_t ipl;
  993.     int freed;
  994.     pfn_t v;
  995.     zone_t *zone;
  996.     unsigned long gen = 0;
  997.    
  998. loop:
  999.     ipl = interrupts_disable();
  1000.    
  1001.     /*
  1002.      * First, find suitable frame zone.
  1003.      */
  1004.     zone = find_free_zone_and_lock(order, flags, pzone);
  1005.    
  1006.     /* If no memory, reclaim some slab memory,
  1007.        if it does not help, reclaim all */
  1008.     if (!zone && !(flags & FRAME_NO_RECLAIM)) {
  1009.         freed = slab_reclaim(0);
  1010.         if (freed)
  1011.             zone = find_free_zone_and_lock(order, flags, pzone);
  1012.         if (!zone) {
  1013.             freed = slab_reclaim(SLAB_RECLAIM_ALL);
  1014.             if (freed)
  1015.                 zone = find_free_zone_and_lock(order, flags,
  1016.                     pzone);
  1017.         }
  1018.     }
  1019.     if (!zone) {
  1020.         /*
  1021.          * Sleep until some frames are available again.
  1022.          */
  1023.         if (flags & FRAME_ATOMIC) {
  1024.             interrupts_restore(ipl);
  1025.             return 0;
  1026.         }
  1027.        
  1028. #ifdef CONFIG_DEBUG
  1029.         unsigned long avail;
  1030.  
  1031.         mutex_lock(&mem_avail_mtx);
  1032.         avail = mem_avail_frames;
  1033.         mutex_unlock(&mem_avail_mtx);
  1034.  
  1035.         printf("Thread %" PRIu64 " waiting for %u frames, "
  1036.             "%u available.\n", THREAD->tid, 1ULL << order, avail);
  1037. #endif
  1038.  
  1039.         mutex_lock(&mem_avail_mtx);
  1040.         while ((mem_avail_frames < (1ULL << order)) ||
  1041.             gen == mem_avail_gen)
  1042.             condvar_wait(&mem_avail_cv, &mem_avail_mtx);
  1043.         gen = mem_avail_gen;
  1044.         mutex_unlock(&mem_avail_mtx);
  1045.  
  1046. #ifdef CONFIG_DEBUG
  1047.         mutex_lock(&mem_avail_mtx);
  1048.         avail = mem_avail_frames;
  1049.         mutex_unlock(&mem_avail_mtx);
  1050.  
  1051.         printf("Thread %" PRIu64 " woken up, %u frames available.\n",
  1052.             THREAD->tid, avail);
  1053. #endif
  1054.  
  1055.         interrupts_restore(ipl);
  1056.         goto loop;
  1057.     }
  1058.    
  1059.     v = zone_frame_alloc(zone, order);
  1060.     v += zone->base;
  1061.  
  1062.     spinlock_unlock(&zone->lock);
  1063.    
  1064.     mutex_lock(&mem_avail_mtx);
  1065.     mem_avail_frames -= (1ULL << order);
  1066.     mutex_unlock(&mem_avail_mtx);
  1067.  
  1068.     interrupts_restore(ipl);
  1069.  
  1070.     if (flags & FRAME_KA)
  1071.         return (void *)PA2KA(PFN2ADDR(v));
  1072.     return (void *)PFN2ADDR(v);
  1073. }
  1074.  
  1075. /** Free a frame.
  1076.  *
  1077.  * Find respective frame structure for supplied physical frame address.
  1078.  * Decrement frame reference count.
  1079.  * If it drops to zero, move the frame structure to free list.
  1080.  *
  1081.  * @param frame     Physical Address of of the frame to be freed.
  1082.  */
  1083. void frame_free(uintptr_t frame)
  1084. {
  1085.     ipl_t ipl;
  1086.     zone_t *zone;
  1087.     pfn_t pfn = ADDR2PFN(frame);
  1088.  
  1089.     ipl = interrupts_disable();
  1090.  
  1091.     /*
  1092.      * First, find host frame zone for addr.
  1093.      */
  1094.     zone = find_zone_and_lock(pfn, NULL);
  1095.     ASSERT(zone);
  1096.    
  1097.     zone_frame_free(zone, pfn - zone->base);
  1098.    
  1099.     spinlock_unlock(&zone->lock);
  1100.    
  1101.     /*
  1102.      * Signal that some memory has been freed.
  1103.      */
  1104.     mutex_lock(&mem_avail_mtx);
  1105.     mem_avail_frames++;
  1106.     mem_avail_gen++;
  1107.     condvar_broadcast(&mem_avail_cv);
  1108.     mutex_unlock(&mem_avail_mtx);
  1109.  
  1110.     interrupts_restore(ipl);
  1111. }
  1112.  
  1113. /** Add reference to frame.
  1114.  *
  1115.  * Find respective frame structure for supplied PFN and
  1116.  * increment frame reference count.
  1117.  *
  1118.  * @param pfn       Frame number of the frame to be freed.
  1119.  */
  1120. void frame_reference_add(pfn_t pfn)
  1121. {
  1122.     ipl_t ipl;
  1123.     zone_t *zone;
  1124.     frame_t *frame;
  1125.  
  1126.     ipl = interrupts_disable();
  1127.    
  1128.     /*
  1129.      * First, find host frame zone for addr.
  1130.      */
  1131.     zone = find_zone_and_lock(pfn, NULL);
  1132.     ASSERT(zone);
  1133.    
  1134.     frame = &zone->frames[pfn - zone->base];
  1135.     frame->refcount++;
  1136.    
  1137.     spinlock_unlock(&zone->lock);
  1138.     interrupts_restore(ipl);
  1139. }
  1140.  
  1141. /** Mark given range unavailable in frame zones. */
  1142. void frame_mark_unavailable(pfn_t start, count_t count)
  1143. {
  1144.     unsigned int i;
  1145.     zone_t *zone;
  1146.     unsigned int prefzone = 0;
  1147.    
  1148.     for (i = 0; i < count; i++) {
  1149.         zone = find_zone_and_lock(start + i, &prefzone);
  1150.         if (!zone) /* PFN not found */
  1151.             continue;
  1152.         zone_mark_unavailable(zone, start + i - zone->base);
  1153.  
  1154.         spinlock_unlock(&zone->lock);
  1155.     }
  1156. }
  1157.  
  1158. /** Initialize physical memory management. */
  1159. void frame_init(void)
  1160. {
  1161.     if (config.cpu_active == 1) {
  1162.         zones.count = 0;
  1163.         spinlock_initialize(&zones.lock, "zones.lock");
  1164.         mutex_initialize(&mem_avail_mtx, MUTEX_ACTIVE);
  1165.         condvar_initialize(&mem_avail_cv);
  1166.     }
  1167.     /* Tell the architecture to create some memory */
  1168.     frame_arch_init();
  1169.     if (config.cpu_active == 1) {
  1170.         frame_mark_unavailable(ADDR2PFN(KA2PA(config.base)),
  1171.             SIZE2FRAMES(config.kernel_size));
  1172.         frame_mark_unavailable(ADDR2PFN(KA2PA(config.stack_base)),
  1173.             SIZE2FRAMES(config.stack_size));
  1174.        
  1175.         count_t i;
  1176.         for (i = 0; i < init.cnt; i++) {
  1177.             pfn_t pfn = ADDR2PFN(KA2PA(init.tasks[i].addr));
  1178.             frame_mark_unavailable(pfn,
  1179.                 SIZE2FRAMES(init.tasks[i].size));
  1180.         }
  1181.  
  1182.         if (ballocs.size)
  1183.             frame_mark_unavailable(ADDR2PFN(KA2PA(ballocs.base)),
  1184.                 SIZE2FRAMES(ballocs.size));
  1185.  
  1186.         /* Black list first frame, as allocating NULL would
  1187.          * fail in some places */
  1188.         frame_mark_unavailable(0, 1);
  1189.     }
  1190. }
  1191.  
  1192.  
  1193. /** Return total size of all zones. */
  1194. uint64_t zone_total_size(void)
  1195. {
  1196.     zone_t *zone = NULL;
  1197.     unsigned int i;
  1198.     ipl_t ipl;
  1199.     uint64_t total = 0;
  1200.  
  1201.     ipl = interrupts_disable();
  1202.     spinlock_lock(&zones.lock);
  1203.    
  1204.     for (i = 0; i < zones.count; i++) {
  1205.         zone = zones.info[i];
  1206.         spinlock_lock(&zone->lock);
  1207.         total += (uint64_t) FRAMES2SIZE(zone->count);
  1208.         spinlock_unlock(&zone->lock);
  1209.     }
  1210.    
  1211.     spinlock_unlock(&zones.lock);
  1212.     interrupts_restore(ipl);
  1213.    
  1214.     return total;
  1215. }
  1216.  
  1217. /** Prints list of zones. */
  1218. void zone_print_list(void)
  1219. {
  1220.     zone_t *zone = NULL;
  1221.     unsigned int i;
  1222.     ipl_t ipl;
  1223.  
  1224. #ifdef __32_BITS__ 
  1225.     printf("#  base address free frames  busy frames\n");
  1226.     printf("-- ------------ ------------ ------------\n");
  1227. #endif
  1228.  
  1229. #ifdef __64_BITS__
  1230.     printf("#  base address         free frames  busy frames\n");
  1231.     printf("-- -------------------- ------------ ------------\n");
  1232. #endif
  1233.    
  1234.     /*
  1235.      * Because printing may require allocation of memory, we may not hold
  1236.      * the frame allocator locks when printing zone statistics.  Therefore,
  1237.      * we simply gather the statistics under the protection of the locks and
  1238.      * print the statistics when the locks have been released.
  1239.      *
  1240.      * When someone adds/removes zones while we are printing the statistics,
  1241.      * we may end up with inaccurate output (e.g. a zone being skipped from
  1242.      * the listing).
  1243.      */
  1244.  
  1245.     for (i = 0; ; i++) {
  1246.         uintptr_t base;
  1247.         count_t free_count;
  1248.         count_t busy_count;
  1249.  
  1250.         ipl = interrupts_disable();
  1251.         spinlock_lock(&zones.lock);
  1252.        
  1253.         if (i >= zones.count) {
  1254.             spinlock_unlock(&zones.lock);
  1255.             interrupts_restore(ipl);
  1256.             break;
  1257.         }
  1258.  
  1259.         zone = zones.info[i];
  1260.         spinlock_lock(&zone->lock);
  1261.  
  1262.         base = PFN2ADDR(zone->base);
  1263.         free_count = zone->free_count;
  1264.         busy_count = zone->busy_count;
  1265.  
  1266.         spinlock_unlock(&zone->lock);
  1267.        
  1268.         spinlock_unlock(&zones.lock);
  1269.         interrupts_restore(ipl);
  1270.  
  1271. #ifdef __32_BITS__
  1272.         printf("%-2u   %10p %12" PRIc " %12" PRIc "\n", i, base,
  1273.             free_count, busy_count);
  1274. #endif
  1275.  
  1276. #ifdef __64_BITS__
  1277.         printf("%-2u   %18p %12" PRIc " %12" PRIc "\n", i, base,
  1278.             free_count, busy_count);
  1279. #endif
  1280.        
  1281.     }
  1282. }
  1283.  
  1284. /** Prints zone details.
  1285.  *
  1286.  * @param num       Zone base address or zone number.
  1287.  */
  1288. void zone_print_one(unsigned int num)
  1289. {
  1290.     zone_t *zone = NULL;
  1291.     ipl_t ipl;
  1292.     unsigned int i;
  1293.     uintptr_t base;
  1294.     count_t count;
  1295.     count_t busy_count;
  1296.     count_t free_count;
  1297.  
  1298.     ipl = interrupts_disable();
  1299.     spinlock_lock(&zones.lock);
  1300.  
  1301.     for (i = 0; i < zones.count; i++) {
  1302.         if ((i == num) || (PFN2ADDR(zones.info[i]->base) == num)) {
  1303.             zone = zones.info[i];
  1304.             break;
  1305.         }
  1306.     }
  1307.     if (!zone) {
  1308.         spinlock_unlock(&zones.lock);
  1309.         interrupts_restore(ipl);
  1310.         printf("Zone not found.\n");
  1311.         return;
  1312.     }
  1313.    
  1314.     spinlock_lock(&zone->lock);
  1315.     base = PFN2ADDR(zone->base);
  1316.     count = zone->count;
  1317.     busy_count = zone->busy_count;
  1318.     free_count = zone->free_count;
  1319.     spinlock_unlock(&zone->lock);
  1320.     spinlock_unlock(&zones.lock);
  1321.     interrupts_restore(ipl);
  1322.  
  1323.     printf("Zone base address: %p\n", base);
  1324.     printf("Zone size: %" PRIc " frames (%" PRIs " KiB)\n", count,
  1325.         SIZE2KB(FRAMES2SIZE(count)));
  1326.     printf("Allocated space: %" PRIc " frames (%" PRIs " KiB)\n",
  1327.         busy_count, SIZE2KB(FRAMES2SIZE(busy_count)));
  1328.     printf("Available space: %" PRIc " frames (%" PRIs " KiB)\n",
  1329.         free_count, SIZE2KB(FRAMES2SIZE(free_count)));
  1330. }
  1331.  
  1332. /** @}
  1333.  */
  1334.  
  1335.