Subversion Repositories HelenOS

Rev

Rev 1965 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2003-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29.  
  30. #include <arch.h>
  31. #include <arch/boot.h>
  32. #include <arch/cp0.h>
  33. #include <arch/exception.h>
  34. #include <arch/asm.h>
  35. #include <mm/as.h>
  36.  
  37. #include <userspace.h>
  38. #include <arch/console.h>
  39. #include <memstr.h>
  40. #include <proc/thread.h>
  41. #include <proc/uarg.h>
  42. #include <print.h>
  43. #include <syscall/syscall.h>
  44. #include <sysinfo/sysinfo.h>
  45.  
  46. #include <arch/interrupt.h>
  47. #include <arch/drivers/arc.h>
  48. #include <console/chardev.h>
  49. #include <arch/debugger.h>
  50. #include <genarch/fb/fb.h>
  51. #include <debug.h>
  52.  
  53. #include <arch/asm/regname.h>
  54.  
  55. /* Size of the code jumping to the exception handler code
  56.  * - J+NOP
  57.  */
  58. #define EXCEPTION_JUMP_SIZE    8
  59.  
  60. #define TLB_EXC ((char *) 0x80000000)
  61. #define NORM_EXC ((char *) 0x80000180)
  62. #define CACHE_EXC ((char *) 0x80000100)
  63.  
  64. bootinfo_t bootinfo;
  65.  
  66. void arch_pre_main(void)
  67. {
  68.     /* Setup usermode */
  69.     init.cnt = bootinfo.cnt;
  70.    
  71.     __u32 i;
  72.    
  73.     for (i = 0; i < bootinfo.cnt; i++) {
  74.         init.tasks[i].addr = bootinfo.tasks[i].addr;
  75.         init.tasks[i].size = bootinfo.tasks[i].size;
  76.     }
  77. }
  78.  
  79. void arch_pre_mm_init(void)
  80. {
  81.     /* It is not assumed by default */
  82.     interrupts_disable();
  83.    
  84.     /* Initialize dispatch table */
  85.     exception_init();
  86.     arc_init();
  87.  
  88.     /* Copy the exception vectors to the right places */
  89.     memcpy(TLB_EXC, (char *)tlb_refill_entry, EXCEPTION_JUMP_SIZE);
  90.     memcpy(NORM_EXC, (char *)exception_entry, EXCEPTION_JUMP_SIZE);
  91.     memcpy(CACHE_EXC, (char *)cache_error_entry, EXCEPTION_JUMP_SIZE);
  92.  
  93.     interrupt_init();
  94.     /*
  95.      * Switch to BEV normal level so that exception vectors point to the kernel.
  96.      * Clear the error level.
  97.      */
  98.     cp0_status_write(cp0_status_read() & ~(cp0_status_bev_bootstrap_bit|cp0_status_erl_error_bit));
  99.  
  100.     /*
  101.      * Mask all interrupts
  102.      */
  103.     cp0_mask_all_int();
  104.  
  105.     /*
  106.      * Unmask hardware clock interrupt.
  107.      */
  108.     cp0_unmask_int(TIMER_IRQ);
  109.  
  110.     console_init();
  111.     debugger_init();
  112. }
  113.  
  114. void arch_post_mm_init(void)
  115. {
  116. #ifdef CONFIG_FB
  117.         fb_init(0x12000000, 640, 480, 24, 1920); // gxemul framebuffer
  118. #endif
  119.         sysinfo_set_item_val("machine." STRING(MACHINE),NULL,1);
  120. }
  121.  
  122. void arch_pre_smp_init(void)
  123. {
  124. }
  125.  
  126. void arch_post_smp_init(void)
  127. {
  128. }
  129.  
  130. /* Stack pointer saved when entering user mode */
  131. /* TODO: How do we do it on SMP system???? */
  132.  
  133. /* Why the linker moves the variable 64K away in assembler
  134.  * when not in .text section ????????
  135.  */
  136. __address supervisor_sp __attribute__ ((section (".text")));
  137.  
  138. void userspace(uspace_arg_t *kernel_uarg)
  139. {
  140.     /* EXL=1, UM=1, IE=1 */
  141.     cp0_status_write(cp0_status_read() | (cp0_status_exl_exception_bit |
  142.                           cp0_status_um_bit |
  143.                           cp0_status_ie_enabled_bit));
  144.     cp0_epc_write((__address) kernel_uarg->uspace_entry);
  145.     userspace_asm(((__address) kernel_uarg->uspace_stack+PAGE_SIZE),
  146.               (__address) kernel_uarg->uspace_uarg,
  147.               (__address) kernel_uarg->uspace_entry);
  148.     while (1)
  149.         ;
  150. }
  151.  
  152. /** Perform mips32 specific tasks needed before the new task is run. */
  153. void before_task_runs_arch(void)
  154. {
  155. }
  156.  
  157. /** Perform mips32 specific tasks needed before the new thread is scheduled. */
  158. void before_thread_runs_arch(void)
  159. {
  160.     supervisor_sp = (__address) &THREAD->kstack[THREAD_STACK_SIZE-SP_DELTA];
  161. }
  162.  
  163. void after_thread_ran_arch(void)
  164. {
  165. }
  166.  
  167. /** Set thread-local-storage pointer
  168.  *
  169.  * We have it currently in K1, it is
  170.  * possible to have it separately in the future.
  171.  */
  172. __native sys_tls_set(__native addr)
  173. {
  174.     return 0;
  175. }
  176.  
  177.