Subversion Repositories HelenOS

Rev

Rev 3343 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2001-2004 Jakub Jermar
  3.  * Copyright (c) 2008 Jiri Svoboda
  4.  * All rights reserved.
  5.  *
  6.  * Redistribution and use in source and binary forms, with or without
  7.  * modification, are permitted provided that the following conditions
  8.  * are met:
  9.  *
  10.  * - Redistributions of source code must retain the above copyright
  11.  *   notice, this list of conditions and the following disclaimer.
  12.  * - Redistributions in binary form must reproduce the above copyright
  13.  *   notice, this list of conditions and the following disclaimer in the
  14.  *   documentation and/or other materials provided with the distribution.
  15.  * - The name of the author may not be used to endorse or promote products
  16.  *   derived from this software without specific prior written permission.
  17.  *
  18.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  19.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  20.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  21.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  22.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  23.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  27.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28.  */
  29.  
  30. /** @addtogroup genericproc
  31.  * @{
  32.  */
  33.  
  34. /**
  35.  * @file
  36.  * @brief   Running userspace programs.
  37.  */
  38.  
  39. #include <main/uinit.h>
  40. #include <proc/thread.h>
  41. #include <proc/task.h>
  42. #include <proc/uarg.h>
  43. #include <mm/as.h>
  44. #include <mm/slab.h>
  45. #include <arch.h>
  46. #include <adt/list.h>
  47. #include <ipc/ipc.h>
  48. #include <ipc/ipcrsc.h>
  49. #include <security/cap.h>
  50. #include <lib/elf.h>
  51. #include <errno.h>
  52. #include <print.h>
  53. #include <syscall/copy.h>
  54. #include <proc/program.h>
  55.  
  56. #ifndef LOADED_PROG_STACK_PAGES_NO
  57. #define LOADED_PROG_STACK_PAGES_NO 1
  58. #endif
  59.  
  60. /**
  61.  * Points to the binary image used as the program loader. All non-initial
  62.  * tasks are created from this executable image.
  63.  */
  64. void *program_loader = NULL;
  65.  
  66. /** Create a program using an existing address space.
  67.  *
  68.  * @param as        Address space containing a binary program image.
  69.  * @param entry_addr    Program entry-point address in program address space.
  70.  * @param name      Name to set for the program's task.
  71.  * @param p     Buffer for storing program information.
  72.  */
  73. void program_create(as_t *as, uintptr_t entry_addr, char *name, program_t *p)
  74. {
  75.     as_area_t *a;
  76.     uspace_arg_t *kernel_uarg;
  77.  
  78.     kernel_uarg = (uspace_arg_t *) malloc(sizeof(uspace_arg_t), 0);
  79.     kernel_uarg->uspace_entry = (void *) entry_addr;
  80.     kernel_uarg->uspace_stack = (void *) USTACK_ADDRESS;
  81.     kernel_uarg->uspace_thread_function = NULL;
  82.     kernel_uarg->uspace_thread_arg = NULL;
  83.     kernel_uarg->uspace_uarg = NULL;
  84.    
  85.     p->task = task_create(as, name);
  86.     ASSERT(p->task);
  87.  
  88.     /*
  89.      * Create the data as_area.
  90.      */
  91.     a = as_area_create(as, AS_AREA_READ | AS_AREA_WRITE | AS_AREA_CACHEABLE,
  92.         LOADED_PROG_STACK_PAGES_NO * PAGE_SIZE, USTACK_ADDRESS,
  93.         AS_AREA_ATTR_NONE, &anon_backend, NULL);
  94.  
  95.     /*
  96.      * Create the main thread.
  97.      */
  98.     p->main_thread = thread_create(uinit, kernel_uarg, p->task,
  99.         THREAD_FLAG_USPACE, "uinit", false);
  100.     ASSERT(p->main_thread);
  101. }
  102.  
  103. /** Parse an executable image in the kernel memory.
  104.  *
  105.  * If the image belongs to a program loader, it is registered as such,
  106.  * (and *task is set to NULL). Otherwise a task is created from the
  107.  * executable image. The task is returned in *task.
  108.  *
  109.  * @param image_addr    Address of an executable program image.
  110.  * @param name      Name to set for the program's task.
  111.  * @param p     Buffer for storing program info. If image_addr
  112.  *          points to a loader image, p->task will be set to
  113.  *          NULL and EOK will be returned.
  114.  *
  115.  * @return EOK on success or negative error code.
  116.  */
  117. int program_create_from_image(void *image_addr, char *name, program_t *p)
  118. {
  119.     as_t *as;
  120.     unsigned int rc;
  121.  
  122.     as = as_create(0);
  123.     ASSERT(as);
  124.  
  125.     rc = elf_load((elf_header_t *) image_addr, as, 0);
  126.     if (rc != EE_OK) {
  127.         as_destroy(as);
  128.         p->task = NULL;
  129.         p->main_thread = NULL;
  130.         if (rc != EE_LOADER)
  131.             return ENOTSUP;
  132.        
  133.         /* Register image as the program loader */
  134.         ASSERT(program_loader == NULL);
  135.         program_loader = image_addr;
  136.         printf("Registered program loader at 0x%" PRIp "\n",
  137.             image_addr);
  138.         return EOK;
  139.     }
  140.  
  141.     program_create(as, ((elf_header_t *) image_addr)->e_entry, name, p);
  142.  
  143.     return EOK;
  144. }
  145.  
  146. /** Create a task from the program loader image.
  147.  *
  148.  * @param p Buffer for storing program info.
  149.  * @param name  Name to set for the program's task.
  150.  *
  151.  * @return EOK on success or negative error code.
  152.  */
  153. int program_create_loader(program_t *p, char *name)
  154. {
  155.     as_t *as;
  156.     unsigned int rc;
  157.     void *loader;
  158.  
  159.     as = as_create(0);
  160.     ASSERT(as);
  161.  
  162.     loader = program_loader;
  163.     if (!loader) {
  164.         printf("Cannot spawn loader as none was registered\n");
  165.         return ENOENT;
  166.     }
  167.  
  168.     rc = elf_load((elf_header_t *) program_loader, as, ELD_F_LOADER);
  169.     if (rc != EE_OK) {
  170.         as_destroy(as);
  171.         return ENOENT;
  172.     }
  173.  
  174.     program_create(as, ((elf_header_t *) program_loader)->e_entry,
  175.         name, p);
  176.  
  177.     return EOK;
  178. }
  179.  
  180. /** Make program ready.
  181.  *
  182.  * Switch program's main thread to the ready state.
  183.  *
  184.  * @param p Program to make ready.
  185.  */
  186. void program_ready(program_t *p)
  187. {
  188.     thread_ready(p->main_thread);
  189. }
  190.  
  191. /** Syscall for creating a new loader instance from userspace.
  192.  *
  193.  * Creates a new task from the program loader image, connects a phone
  194.  * to it and stores the phone id into the provided buffer.
  195.  *
  196.  * @param uspace_phone_id   Userspace address where to store the phone id.
  197.  * @param name          Name to set on the new task (typically the same
  198.  *              as the command used to execute it).
  199.  *
  200.  * @return 0 on success or an error code from @ref errno.h.
  201.  */
  202. unative_t sys_program_spawn_loader(int *uspace_phone_id, char *uspace_name,
  203.     size_t name_len)
  204. {
  205.     program_t p;
  206.     int fake_id;
  207.     int rc;
  208.     int phone_id;
  209.     char namebuf[TASK_NAME_BUFLEN];
  210.  
  211.     fake_id = 0;
  212.  
  213.     /* Before we even try creating the task, see if we can write the id */
  214.     rc = (unative_t) copy_to_uspace(uspace_phone_id, &fake_id,
  215.         sizeof(fake_id));
  216.     if (rc != 0)
  217.         return rc;
  218.  
  219.     /* Cap length of name and copy it from userspace. */
  220.  
  221.     if (name_len > THREAD_NAME_BUFLEN - 1)
  222.         name_len = THREAD_NAME_BUFLEN - 1;
  223.  
  224.     rc = copy_from_uspace(namebuf, uspace_name, name_len);
  225.     if (rc != 0)
  226.         return (unative_t) rc;
  227.  
  228.     namebuf[name_len] = '\0';
  229.  
  230.     /* Allocate the phone for communicating with the new task. */
  231.  
  232.     phone_id = phone_alloc();
  233.     if (phone_id < 0)
  234.         return ELIMIT;
  235.  
  236.     /* Spawn the new task. */
  237.  
  238.     rc = program_create_loader(&p, namebuf);
  239.     if (rc != 0)
  240.         return rc;
  241.  
  242.     phone_connect(phone_id, &p.task->answerbox);
  243.  
  244.     /* No need to aquire lock before task_ready() */
  245.     rc = (unative_t) copy_to_uspace(uspace_phone_id, &phone_id,
  246.         sizeof(phone_id));
  247.     if (rc != 0) {
  248.         /* Ooops */
  249.         ipc_phone_hangup(&TASK->phones[phone_id]);
  250.         task_kill(p.task->taskid);
  251.         return rc;
  252.     }
  253.  
  254.     // FIXME: control the capabilities
  255.     cap_set(p.task, cap_get(TASK));
  256.  
  257.     program_ready(&p);
  258.  
  259.     return EOK;
  260. }
  261.  
  262. /** @}
  263.  */
  264.