Subversion Repositories HelenOS

Rev

Rev 4712 | Rev 4728 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup socket
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  Socket application program interface (API).
  35.  *  This is a part of the network application library.
  36.  *  Based on the linux src/include/linux/socket.h header file and BSD socket interface.
  37.  */
  38.  
  39. #ifndef __NET_SOCKET_H__
  40. #define __NET_SOCKET_H__
  41.  
  42. #include "byteorder.h"
  43. #include "in.h"
  44. #include "inet.h"
  45.  
  46. #include "socket_codes.h"
  47. #include "socket_errno.h"
  48.  
  49. /** @name Socket application programming interface
  50.  */
  51. /*@{*/
  52.  
  53. /** Creates a new socket.
  54.  *  @param domain The socket protocol family. Input parameter.
  55.  *  @param type Socket type. Input parameter.
  56.  *  @param protocol Socket protocol. Input parameter.
  57.  *  @returns The socket identifier on success.
  58.  *  @returns EPFNOTSUPPORT if the protocol family is not supported.
  59.  *  @returns ESOCKNOTSUPPORT if the socket type is not supported.
  60.  *  @returns EPROTONOSUPPORT if the protocol is not supported.
  61.  *  @returns ENOMEM if there is not enough memory left.
  62.  *  @returns Other error codes as defined for the NET_SOCKET message.
  63.  */
  64. int socket( int domain, int type, int protocol );
  65.  
  66. /** Binds the socket to a port address.
  67.  *  @param socket_id Socket identifier. Input parameter.
  68.  *  @param my_addr The port address. Input parameter.
  69.  *  @param addrlen The address length. Input parameter.
  70.  *  @returns EOK on success.
  71.  *  @returns ENOTSOCK if the socket is not found.
  72.  *  @returns EBADMEM if the my_addr parameter is NULL.
  73.  *  @returns NO_DATA if the addlen parameter is zero (0).
  74.  *  @returns Other error codes as defined for the NET_SOCKET_BIND message.
  75.  */
  76. int bind( int socket_id, const struct sockaddr * my_addr, socklen_t addrlen );
  77.  
  78. /** Sets the number of connections waiting to be accepted.
  79.  *  @param socket_id Socket identifier. Input parameter.
  80.  *  @param backlog The maximum number of waiting sockets to be accepted. Input parameter.
  81.  *  @returns EOK on success.
  82.  *  @returns EINVAL if the backlog parameter is not positive (<=0).
  83.  *  @returns ENOTSOCK if the socket is not found.
  84.  *  @returns Other error codes as defined for the NET_SOCKET_LISTEN message.
  85.  */
  86. int listen( int socket_id, int backlog );
  87.  
  88. /** Accepts waiting socket.
  89.  *  Blocks until such a socket exists.
  90.  *  @param socket_id Socket identifier. Input parameter.
  91.  *  @param cliaddr The remote client address. Output parameter.
  92.  *  @param addrlen The address length. Input parameter.
  93.  *  @returns EOK on success.
  94.  *  @returns EBADMEM if the cliaddr or addrlen parameter is NULL.
  95.  *  @returns EINVAL if the backlog parameter is not positive (<=0).
  96.  *  @returns ENOTSOCK if the socket is not found.
  97.  *  @returns Other error codes as defined for the NET_SOCKET_ACCEPT message.
  98.  */
  99. int accept( int socket_id, struct sockaddr * cliaddr, socklen_t * addrlen );
  100.  
  101. /** Connects socket to the remote server.
  102.  *  @param socket_id Socket identifier. Input parameter.
  103.  *  @param serv_addr The remote server address. Input parameter.
  104.  *  @param addrlen The address length. Input parameter.
  105.  *  @returns EOK on success.
  106.  *  @returns EBADMEM if the serv_addr parameter is NULL.
  107.  *  @returns NO_DATA if the addlen parameter is zero (0).
  108.  *  @returns ENOTSOCK if the socket is not found.
  109.  *  @returns Other error codes as defined for the NET_SOCKET_CONNECT message.
  110.  */
  111. int connect( int socket_id, const struct sockaddr * serv_addr, socklen_t addrlen );
  112.  
  113. /** Closes the socket.
  114.  *  @param socket_id Socket identifier. Input parameter.
  115.  *  @returns EOK on success.
  116.  *  @returns ENOTSOCK if the socket is not found.
  117.  *  @returns Other error codes as defined for the NET_SOCKET_CLOSE message.
  118.  */
  119. int closesocket( int socket_id );
  120.  
  121. /** Sends data via the socket.
  122.  *  @param socket_id Socket identifier. Input parameter.
  123.  *  @param data The data to be sent. Input parameter.
  124.  *  @param datalength The data length. Input parameter.
  125.  *  @param flags Various send flags. Input parameter.
  126.  *  @returns EOK on success.
  127.  *  @returns ENOTSOCK if the socket is not found.
  128.  *  @returns EBADMEM if the data parameter is NULL.
  129.  *  @returns NO_DATA if the datalength parameter is zero (0).
  130.  *  @returns Other error codes as defined for the NET_SOCKET_SEND message.
  131.  */
  132. int send( int socket_id, void * data, size_t datalength, int flags );
  133.  
  134. /** Sends data via the socket to the remote address.
  135.  *  Binds the socket to a free port if not already connected/bound.
  136.  *  @param socket_id Socket identifier. Input parameter.
  137.  *  @param data The data to be sent. Input parameter.
  138.  *  @param datalength The data length. Input parameter.
  139.  *  @param flags Various send flags. Input parameter.
  140.  *  @param toaddr The destination address. Input parameter.
  141.  *  @param addrlen The address length. Input parameter.
  142.  *  @returns EOK on success.
  143.  *  @returns ENOTSOCK if the socket is not found.
  144.  *  @returns EBADMEM if the data or toaddr parameter is NULL.
  145.  *  @returns NO_DATA if the datalength or the addrlen parameter is zero (0).
  146.  *  @returns Other error codes as defined for the NET_SOCKET_SENDTO message.
  147.  */
  148. int sendto( int socket_id, const void * data, size_t datalength, int flags, const struct sockaddr * toaddr, socklen_t addrlen );
  149.  
  150. /** Receives data via the socket.
  151.  *  @param socket_id Socket identifier. Input parameter.
  152.  *  @param data The data buffer to be filled. Output parameter.
  153.  *  @param datalength The data length. Input parameter.
  154.  *  @param flags Various receive flags. Input parameter.
  155.  *  @returns EOK on success.
  156.  *  @returns ENOTSOCK if the socket is not found.
  157.  *  @returns EBADMEM if the data parameter is NULL.
  158.  *  @returns NO_DATA if the datalength parameter is zero (0).
  159.  *  @returns Other error codes as defined for the NET_SOCKET_RECV message.
  160.  */
  161. int recv( int socket_id, void * data, size_t datalength, int flags );
  162.  
  163. /** Receives data via the socket.
  164.  *  @param socket_id Socket identifier. Input parameter.
  165.  *  @param data The data buffer to be filled. Output parameter.
  166.  *  @param datalength The data length. Input parameter.
  167.  *  @param flags Various receive flags. Input parameter.
  168.  *  @param fromaddr The source address. Output parameter.
  169.  *  @param addrlen The address length. The maximum address length is read. The actual address length is set. Input/output parameter.
  170.  *  @returns EOK on success.
  171.  *  @returns ENOTSOCK if the socket is not found.
  172.  *  @returns EBADMEM if the data or fromaddr parameter is NULL.
  173.  *  @returns NO_DATA if the datalength or addrlen parameter is zero (0).
  174.  *  @returns Other error codes as defined for the NET_SOCKET_RECVFROM message.
  175.  */
  176. int recvfrom( int socket_id, void * data, size_t datalength, int flags, struct sockaddr * fromaddr, socklen_t * addrlen );
  177.  
  178. /** Gets socket option.
  179.  *  @param socket_id Socket identifier. Input parameter.
  180.  *  @param level The socket options level. Input parameter.
  181.  *  @param optname The socket option to be get. Input parameter.
  182.  *  @param value The value buffer to be filled. Output parameter.
  183.  *  @param optlen The value buffer length. The maximum length is read. The actual length is set. Input/output parameter.
  184.  *  @returns EOK on success.
  185.  *  @returns ENOTSOCK if the socket is not found.
  186.  *  @returns EBADMEM if the value or optlen parameter is NULL.
  187.  *  @returns NO_DATA if the optlen parameter is zero (0).
  188.  *  @returns Other error codes as defined for the NET_SOCKET_GETSOCKOPT message.
  189.  */
  190. int getsockopt( int socket_id, int level, int optname, void * value, size_t * optlen );
  191.  
  192. /** Sets socket option.
  193.  *  @param socket_id Socket identifier. Input parameter.
  194.  *  @param level The socket options level. Input parameter.
  195.  *  @param optname The socket option to be set. Input parameter.
  196.  *  @param value The value to be set. Input parameter.
  197.  *  @param optlen The value length. Input parameter.
  198.  *  @returns EOK on success.
  199.  *  @returns ENOTSOCK if the socket is not found.
  200.  *  @returns EBADMEM if the value parameter is NULL.
  201.  *  @returns NO_DATA if the optlen parameter is zero (0).
  202.  *  @returns Other error codes as defined for the NET_SOCKET_SETSOCKOPT message.
  203.  */
  204. int setsockopt( int socket_id, int level, int optname, const void * value, size_t optlen );
  205.  
  206. /*@}*/
  207.  
  208. #endif
  209.  
  210. /** @}
  211.  */
  212.