Subversion Repositories HelenOS

Rev

Rev 4743 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup net_nil
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  Network interface layer module interface.
  35.  *  The same interface is used for standalone remote device modules as well as for bundle device modules.
  36.  *  The standalone remote device modules have to be compiled with the nil_remote.c source file.
  37.  *  The bundle device modules with the appropriate network interface layer source file (eth.c etc.).
  38.  *  The upper layers cannot be bundled with the network interface layer.
  39.  */
  40.  
  41. #ifndef __NET_NIL_INTERFACE_H__
  42. #define __NET_NIL_INTERFACE_H__
  43.  
  44. #include <async.h>
  45. #include <errno.h>
  46.  
  47. #include <ipc/ipc.h>
  48.  
  49. #include "../messages.h"
  50.  
  51. #include "../structures/measured_strings.h"
  52. #include "../structures/packet/packet.h"
  53.  
  54. #include "../nil/nil_messages.h"
  55.  
  56. #include "device.h"
  57.  
  58. /** @name Network interface layer module interface
  59.  *  This interface is used by other modules.
  60.  */
  61. /*@{*/
  62.  
  63. /** Returns the device local hardware address.
  64.  *  @param[in] nil_phone The network interface layer phone.
  65.  *  @param[in] device_id The device identifier.
  66.  *  @param[out] address The device local hardware address.
  67.  *  @param[out] data The address data.
  68.  *  @returns EOK on success.
  69.  *  @returns EBADMEM if the address parameter and/or the data parameter is NULL.
  70.  *  @returns ENOENT if there no such device.
  71.  *  @returns Other error codes as defined for the generic_get_addr_req() function.
  72.  */
  73. #define nil_get_addr_req( nil_phone, device_id, address, data ) \
  74.     generic_get_addr_req( nil_phone, NET_NIL_ADDR, device_id, address, data )
  75.  
  76. /** Returns the device broadcast hardware address.
  77.  *  @param[in] nil_phone The network interface layer phone.
  78.  *  @param[in] device_id The device identifier.
  79.  *  @param[out] address The device broadcast hardware address.
  80.  *  @param[out] data The address data.
  81.  *  @returns EOK on success.
  82.  *  @returns EBADMEM if the address parameter is NULL.
  83.  *  @returns ENOENT if there no such device.
  84.  *  @returns Other error codes as defined for the generic_get_addr_req() function.
  85.  */
  86. #define nil_get_broadcast_addr_req( nil_phone, device_id, address, data )   \
  87.     generic_get_addr_req( nil_phone, NET_NIL_BROADCAST_ADDR, device_id, address, data )
  88.  
  89. /** Sends the packet queue.
  90.  *  @param[in] nil_phone The network interface layer phone.
  91.  *  @param[in] device_id The device identifier.
  92.  *  @param[in] packet The packet queue.
  93.  *  @param[in] sender The sending module service.
  94.  *  @returns EOK on success.
  95.  *  @returns Other error codes as defined for the generic_send_msg() function.
  96.  */
  97. #define nil_send_msg( nil_phone, device_id, packet, sender )    \
  98.     generic_send_msg( nil_phone, NET_NIL_SEND, device_id, packet_get_id( packet ), sender, 0 )
  99.  
  100. /** Returns the device packet dimensions for sending.
  101.  *  @param[in] nil_phone The network interface layer phone.
  102.  *  @param[in] device_id The device identifier.
  103.  *  @param[out] addr_len The minimum reserved address length.
  104.  *  @param[out] prefix The minimum reserved prefix size.
  105.  *  @param[out] content The maximum content size.
  106.  *  @param[out] suffix The minimum reserved suffix size.
  107.  *  @returns EOK on success.
  108.  *  @returns EBADMEM if either one of the parameters is NULL.
  109.  *  @returns ENOENT if there is no such device.
  110.  *  @returns Other error codes as defined for the generic_packet_size_req() function.
  111.  */
  112. #define nil_packet_size_req( nil_phone, device_id, addr_len, prefix, content, suffix )  \
  113.     generic_packet_size_req( nil_phone, NET_NIL_PACKET_SPACE, device_id, addr_len, prefix, content, suffix )
  114.  
  115. /** Registers new device or updates the MTU of an existing one.
  116.  *  @param[in] nil_phone The network interface layer phone.
  117.  *  @param[in] device_id The new device identifier.
  118.  *  @param[in] mtu The device maximum transmission unit.
  119.  *  @param[in] netif_service The device driver service.
  120.  *  @returns EOK on success.
  121.  *  @returns EEXIST if the device with the different service exists.
  122.  *  @returns ENOMEM if there is not enough memory left.
  123.  *  @returns Other error codes as defined for the generic_device_req() function.
  124.  */
  125. #define nil_device_req( nil_phone, device_id, mtu, netif_service )  \
  126.     generic_device_req( nil_phone, NET_NIL_DEVICE, device_id, mtu, netif_service )
  127.  
  128. /** Notifies the network interface layer about the device state change.
  129.  *  @param[in] nil_phone The network interface layer phone.
  130.  *  @param[in] device_id The device identifier.
  131.  *  @param[in] state The new device state.
  132.  *  @returns EOK on success.
  133.  *  @returns Other error codes as defined for each specific module device state function.
  134.  */
  135. int nil_device_state_msg( int nil_phone, device_id_t device_id, int state );
  136.  
  137. /** Passes the packet queue to the network interface layer.
  138.  *  Processes and redistributes the received packet queue to the registered upper layers.
  139.  *  @param[in] nil_phone The network interface layer phone.
  140.  *  @param[in] device_id The source device identifier.
  141.  *  @param[in] packet The received packet or the received packet queue.
  142.  *  @param target The target service. Ignored parameter.
  143.  *  @returns EOK on success.
  144.  *  @returns Other error codes as defined for each specific module received function.
  145.  */
  146. int nil_received_msg( int nil_phone, device_id_t device_id, packet_t packet, services_t target );
  147.  
  148. /** Creates bidirectional connection with the network interface layer module and registers the message receiver.
  149.  *  @param[in] service The network interface layer module service.
  150.  *  @param[in] device_id The device identifier.
  151.  *  @param[in] me The requesting module service.
  152.  *  @param[in] receiver The message receiver.
  153.  *  @returns The phone of the needed service.
  154.  *  @returns EOK on success.
  155.  *  @returns Other error codes as defined for the bind_service() function.
  156.  */
  157. #define nil_bind_service( service, device_id, me, receiver )    \
  158.     bind_service( service, device_id, me, 0, receiver );
  159. /*@}*/
  160.  
  161. #endif
  162.  
  163. /** @}
  164.  */
  165.