Subversion Repositories HelenOS

Rev

Rev 4307 | Rev 4704 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup net_nil
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  Network interface layer interface.
  35.  *  The same interface is used for standalone remote device modules as well as for bundle device modules.
  36.  *  The standalone remote device modules have to be compiled with the nil_remote.c source file.
  37.  *  The bundle device modules with the appropriate network interface layer source file (eth.c etc.).
  38.  *  The upper layers cannot be bundled with the network interface layer.
  39.  */
  40.  
  41. #ifndef __NET_NIL_INTERFACE_H__
  42. #define __NET_NIL_INTERFACE_H__
  43.  
  44. #include <async.h>
  45. #include <errno.h>
  46.  
  47. #include <ipc/ipc.h>
  48.  
  49. #include "../messages.h"
  50.  
  51. #include "../structures/measured_strings.h"
  52. #include "../structures/packet/packet.h"
  53.  
  54. #include "../nil/nil_messages.h"
  55.  
  56. #include "device.h"
  57.  
  58. /** Returns the device local hardware address.
  59.  *  @param nil_phone The network interface layer phone. Input parameter.
  60.  *  @param device_id The device identifier. Input parameter.
  61.  *  @param address The device local hardware address. Output parameter.
  62.  *  @param data The address data. Output parameter.
  63.  *  @returns EOK on success.
  64.  *  @returns EBADMEM if the address parameter is NULL.
  65.  *  @returns ENOENT if there no such device.
  66.  *  @returns Other error codes as defined for the generic_get_addr() function.
  67.  */
  68. #define nil_get_addr( nil_phone, device_id, address, data ) \
  69.     generic_get_addr( nil_phone, NET_NIL_ADDR, device_id, address, data )
  70.  
  71. /** Returns the device broadcast hardware address.
  72.  *  @param nil_phone The network interface layer phone. Input parameter.
  73.  *  @param device_id The device identifier. Input parameter.
  74.  *  @param address The device broadcast hardware address. Output parameter.
  75.  *  @param data The address data. Output parameter.
  76.  *  @returns EOK on success.
  77.  *  @returns EBADMEM if the address parameter is NULL.
  78.  *  @returns ENOENT if there no such device.
  79.  *  @returns Other error codes as defined for the generic_get_addr() function.
  80.  */
  81. #define nil_get_broadcast_addr( nil_phone, device_id, address, data )   \
  82.     generic_get_addr( nil_phone, NET_NIL_BROADCAST_ADDR, device_id, address, data )
  83.  
  84. /** Sends the packet queue.
  85.  *  @param nil_phone The network interface layer phone. Input parameter.
  86.  *  @param device_id The device identifier. Input parameter.
  87.  *  @param packet The packet queue. Input parameter.
  88.  *  @param sender The sending module service. Input parameter.
  89.  *  @returns EOK on success.
  90.  *  @returns Other error codes as defined for the generic_send_msg() function.
  91.  */
  92. #define nil_send_msg( nil_phone, device_id, packet, sender )    \
  93.     generic_send_msg( nil_phone, NET_NIL_SEND, device_id, packet_get_id( packet ), sender )
  94.  
  95. /** Returns the device packet dimensions for sending.
  96.  *  @param nil_phone The network interface layer phone. Input parameter.
  97.  *  @param device_id The device identifier. Input parameter.
  98.  *  @param addr_len The minimum reserved address length. Output parameter.
  99.  *  @param prefix The minimum reserved prefix size. Output parameter.
  100.  *  @param content The maximum content size. Output parameter.
  101.  *  @param suffix The minimum reserved suffix size. Output parameter.
  102.  *  @returns EOK on success.
  103.  *  @returns EBADMEM if either one of the parameters is NULL.
  104.  *  @returns ENOENT if there is no such device.
  105.  *  @returns Other error codes as defined for the generic_packet_size_req() function.
  106.  */
  107. #define nil_packet_size_req( nil_phone, device_id, addr_len, prefix, content, suffix )  \
  108.     generic_packet_size_req( nil_phone, NET_NIL_PACKET_SPACE, device_id, addr_len, prefix, content, suffix )
  109.  
  110. /** Registers new device or updates the MTU of an existing one.
  111.  *  @param nil_phone The network interface layer phone. Input parameter.
  112.  *  @param device_id The new device identifier. Input parameter.
  113.  *  @param mtu The device maximum transmission unit. Input parameter.
  114.  *  @param netif_service The device driver service. Input parameter.
  115.  *  @returns EOK on success.
  116.  *  @returns EEXIST if the device with the different service exists.
  117.  *  @returns ENOMEM if there is not enough memory left.
  118.  *  @returns Other error codes as defined for the generic_device_req() function.
  119.  */
  120. #define nil_device_req( nil_phone, device_id, mtu, netif_service )  \
  121.     generic_device_req( nil_phone, NET_NIL_DEVICE, device_id, mtu, netif_service )
  122.  
  123. /** Notifies the network interface layer about the device state change.
  124.  *  @param nil_phone The network interface layer phone. Input parameter.
  125.  *  @param device_id The device identifier. Input parameter.
  126.  *  @param state The new device state. Input parameter.
  127.  *  @returns EOK on success.
  128.  *  @returns Other error codes as defined for each specific module device state function.
  129.  */
  130. int nil_device_state_msg( int nil_phone, device_id_t device_id, int state );
  131.  
  132. /** Passes the packet queue to the network interface layer.
  133.  *  Processes and redistributes the received packet queue to the registered upper layers.
  134.  *  @param nil_phone The network interface layer phone. Input parameter.
  135.  *  @param device_id The source device identifier. Input parameter.
  136.  *  @param packet The received packet or the received packet queue. Input parameter.
  137.  *  @param target The target service. Ignored parameter.
  138.  *  @returns EOK on success.
  139.  *  @returns Other error codes as defined for each specific module received function.
  140.  */
  141. int nil_received_msg( int nil_phone, device_id_t device_id, packet_t packet, services_t target );
  142.  
  143. #endif
  144.  
  145. /** @}
  146.  */
  147.