Subversion Repositories HelenOS

Rev

Rev 4704 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup arp
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  ARP module interface.
  35.  *  The same interface is used for standalone remote modules as well as for bundle modules.
  36.  *  The standalone remote modules have to be compiled with the arp_remote.c source file.
  37.  *  The bundle modules with the arp.c source file.
  38.  */
  39.  
  40. #ifndef __NET_ARP_INTERFACE_H__
  41. #define __NET_ARP_INTERFACE_H__
  42.  
  43. #include "../structures/measured_strings.h"
  44.  
  45. #include "device.h"
  46.  
  47. /** @name ARP module interface
  48.  *  This interface is used by other modules.
  49.  */
  50. /*@{*/
  51.  
  52. /** Registers the new device and the requesting protocol service.
  53.  *  Connects to the network interface layer service.
  54.  *  Determines the device broadcast address, its address lengths and packet size.
  55.  *  @param arp_phone The ARP module phone used for (semi)remote calls. Input parameter.
  56.  *  @param device_id The new device identifier. Input parameter.
  57.  *  @param protocol The requesting protocol service. Input parameter.
  58.  *  @param netif The underlying device network interface layer service. Input parameter.
  59.  *  @param address The local requesting protocol address of the device. Input parameter.
  60.  *  @returns EOK on success.
  61.  *  @returns EEXIST if the device is already used.
  62.  *  @returns ENOMEM if there is not enough memory left.
  63.  *  @returns ENOENT if the network interface service is not known.
  64.  *  @returns EREFUSED if the network interface service is not responding.
  65.  *  @returns Other error codes as defined for the nil_packet_get_size() function.
  66.  *  @returns Other error codes as defined for the nil_get_addr() function.
  67.  *  @returns Other error codes as defined for the nil_get_broadcast_addr() function.
  68.  */
  69. int arp_device_req( int arp_phone, device_id_t device_id, services_t protocol, services_t netif, measured_string_ref address );
  70.  
  71. /** Translates the given protocol address to the network interface address.
  72.  *  Broadcasts the ARP request if the mapping is not found.
  73.  *  Allocates and returns the needed memory block as the data parameter.
  74.  *  @param arp_phone The ARP module phone used for (semi)remote calls. Input parameter.
  75.  *  @param device_id The device identifier. Input parameter.
  76.  *  @param protocol The requesting protocol service. Input parameter.
  77.  *  @param address The local requesting protocol address. Input parameter.
  78.  *  @param translation The translation of the local protocol address. Output parameter.
  79.  *  @param data The allocated raw translation data container. Output parameter.
  80.  *  @returns EOK on success.
  81.  *  @returns EINVAL if the configuration parameter is NULL.
  82.  *  @returns EINVAL if the count parameter is zero (0).
  83.  *  @returns EBADMEM if the translation or the data parameters are NULL.
  84.  *  @returns ENOENT if the mapping is not found.
  85.  */
  86. int arp_translate_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address, measured_string_ref * translation, char ** data );
  87.  
  88. /** Clears the device cache.
  89.  *  @param arp_phone The ARP module phone used for (semi)remote calls. Input parameter.
  90.  *  @param device_id The device identifier. Input parameter.
  91.  *  @returns EOK on success.
  92.  *  @returns ENOENT if the device is not found.
  93.  */
  94. int arp_clear_device_req( int arp_phone, device_id_t device_id );
  95.  
  96. /** Clears the given protocol address from the cache.
  97.  *  @param arp_phone The ARP module phone used for (semi)remote calls. Input parameter.
  98.  *  @param device_id The device identifier. Input parameter.
  99.  *  @param protocol The requesting protocol service. Input parameter.
  100.  *  @param address The protocol address to be cleared. Input parameter.
  101.  *  @returns EOK on success.
  102.  *  @returns ENOENT if the mapping is not found.
  103.  */
  104. int arp_clear_address_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address );
  105.  
  106. /** Cleans the cache.
  107.  *  @param arp_phone The ARP module phone used for (semi)remote calls. Input parameter.
  108.  *  @returns EOK on success.
  109.  */
  110. int arp_clean_cache_req( int arp_phone );
  111.  
  112. /** Connects to the ARP module.
  113.  *  @param service The ARP module service. Ignored parameter.
  114.  *  @returns The ARP module phone on success.
  115.  *  @returns 0 if called by the bundle module.
  116.  */
  117. int arp_connect_module( services_t service );
  118.  
  119. /** Returns the ARP task identifier.
  120.  *  @returns The current task identifier if called by the bundle module.
  121.  *  @returns 0 if called by the remote module.
  122.  */
  123. task_id_t   arp_task_get_id( void );
  124.  
  125. /*@}*/
  126.  
  127. #endif
  128.  
  129. /** @}
  130.  */
  131.