Subversion Repositories HelenOS

Rev

Rev 4327 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2003 Josef Cejka
  3.  * Copyright (c) 2005 Jakub Jermar
  4.  * All rights reserved.
  5.  *
  6.  * Redistribution and use in source and binary forms, with or without
  7.  * modification, are permitted provided that the following conditions
  8.  * are met:
  9.  *
  10.  * - Redistributions of source code must retain the above copyright
  11.  *   notice, this list of conditions and the following disclaimer.
  12.  * - Redistributions in binary form must reproduce the above copyright
  13.  *   notice, this list of conditions and the following disclaimer in the
  14.  *   documentation and/or other materials provided with the distribution.
  15.  * - The name of the author may not be used to endorse or promote products
  16.  *   derived from this software without specific prior written permission.
  17.  *
  18.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  19.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  20.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  21.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  22.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  23.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  27.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28.  */
  29.  
  30. /** @addtogroup genericconsole
  31.  * @{
  32.  */
  33. /** @file
  34.  */
  35.  
  36. #include <console/console.h>
  37. #include <console/chardev.h>
  38. #include <sysinfo/sysinfo.h>
  39. #include <synch/waitq.h>
  40. #include <synch/spinlock.h>
  41. #include <arch/types.h>
  42. #include <ddi/irq.h>
  43. #include <ddi/ddi.h>
  44. #include <ipc/event.h>
  45. #include <ipc/irq.h>
  46. #include <arch.h>
  47. #include <print.h>
  48. #include <putchar.h>
  49. #include <atomic.h>
  50. #include <syscall/copy.h>
  51. #include <errno.h>
  52. #include <string.h>
  53.  
  54. #define KLOG_PAGES    4
  55. #define KLOG_LENGTH   (KLOG_PAGES * PAGE_SIZE / sizeof(wchar_t))
  56. #define KLOG_LATENCY  8
  57.  
  58. /** Kernel log cyclic buffer */
  59. static wchar_t klog[KLOG_LENGTH] __attribute__ ((aligned (PAGE_SIZE)));
  60.  
  61. /** Kernel log initialized */
  62. static bool klog_inited = false;
  63. /** First kernel log characters */
  64. static size_t klog_start = 0;
  65. /** Number of valid kernel log characters */
  66. static size_t klog_len = 0;
  67. /** Number of stored (not printed) kernel log characters */
  68. static size_t klog_stored = 0;
  69. /** Number of stored kernel log characters for uspace */
  70. static size_t klog_uspace = 0;
  71.  
  72. /** Kernel log spinlock */
  73. SPINLOCK_INITIALIZE(klog_lock);
  74.  
  75. /** Physical memory area used for klog buffer */
  76. static parea_t klog_parea;
  77.  
  78. static indev_operations_t stdin_ops = {
  79.     .poll = NULL
  80. };
  81.  
  82. /** Silence output */
  83. bool silent = false;
  84.  
  85. /** Standard input and output character devices */
  86. indev_t *stdin = NULL;
  87. outdev_t *stdout = NULL;
  88.  
  89. indev_t *stdin_wire(void)
  90. {
  91.     if (stdin == NULL) {
  92.         stdin = malloc(sizeof(indev_t), FRAME_ATOMIC);
  93.         if (stdin != NULL)
  94.             indev_initialize("stdin", stdin, &stdin_ops);
  95.     }
  96.    
  97.     return stdin;
  98. }
  99.  
  100. /** Initialize kernel logging facility
  101.  *
  102.  * The shared area contains kernel cyclic buffer. Userspace application may
  103.  * be notified on new data with indication of position and size
  104.  * of the data within the circular buffer.
  105.  *
  106.  */
  107. void klog_init(void)
  108. {
  109.     void *faddr = (void *) KA2PA(klog);
  110.    
  111.     ASSERT((uintptr_t) faddr % FRAME_SIZE == 0);
  112.    
  113.     klog_parea.pbase = (uintptr_t) faddr;
  114.     klog_parea.frames = SIZE2FRAMES(sizeof(klog));
  115.     ddi_parea_register(&klog_parea);
  116.    
  117.     sysinfo_set_item_val("klog.faddr", NULL, (unative_t) faddr);
  118.     sysinfo_set_item_val("klog.pages", NULL, KLOG_PAGES);
  119.    
  120.     spinlock_lock(&klog_lock);
  121.     klog_inited = true;
  122.     spinlock_unlock(&klog_lock);
  123. }
  124.  
  125. void grab_console(void)
  126. {
  127.     bool prev = silent;
  128.    
  129.     silent = false;
  130.     arch_grab_console();
  131.    
  132.     /* Force the console to print the prompt */
  133.     if ((stdin) && (prev))
  134.         indev_push_character(stdin, '\n');
  135. }
  136.  
  137. void release_console(void)
  138. {
  139.     silent = true;
  140.     arch_release_console();
  141. }
  142.  
  143. /** Tell kernel to get keyboard/console access again */
  144. unative_t sys_debug_enable_console(void)
  145. {
  146. #ifdef CONFIG_KCONSOLE
  147.     grab_console();
  148.     return true;
  149. #else
  150.     return false;
  151. #endif
  152. }
  153.  
  154. /** Tell kernel to relinquish keyboard/console access */
  155. unative_t sys_debug_disable_console(void)
  156. {
  157.     release_console();
  158.     return true;
  159. }
  160.  
  161. /** Get string from input character device.
  162.  *
  163.  * Read characters from input character device until first occurrence
  164.  * of newline character.
  165.  *
  166.  * @param indev  Input character device.
  167.  * @param buf    Buffer where to store string terminated by NULL.
  168.  * @param buflen Size of the buffer.
  169.  *
  170.  * @return Number of characters read.
  171.  *
  172.  */
  173. size_t gets(indev_t *indev, char *buf, size_t buflen)
  174. {
  175.     size_t offset = 0;
  176.     size_t count = 0;
  177.     buf[offset] = 0;
  178.    
  179.     wchar_t ch;
  180.     while ((ch = indev_pop_character(indev)) != '\n') {
  181.         if (ch == '\b') {
  182.             if (count > 0) {
  183.                 /* Space, backspace, space */
  184.                 putchar('\b');
  185.                 putchar(' ');
  186.                 putchar('\b');
  187.                
  188.                 count--;
  189.                 offset = str_lsize(buf, count);
  190.                 buf[offset] = 0;
  191.             }
  192.         }
  193.         if (chr_encode(ch, buf, &offset, buflen - 1) == EOK) {
  194.             putchar(ch);
  195.             count++;
  196.             buf[offset] = 0;
  197.         }
  198.     }
  199.    
  200.     return count;
  201. }
  202.  
  203. /** Get character from input device & echo it to screen */
  204. wchar_t getc(indev_t *indev)
  205. {
  206.     wchar_t ch = indev_pop_character(indev);
  207.     putchar(ch);
  208.     return ch;
  209. }
  210.  
  211. void klog_update(void)
  212. {
  213.     spinlock_lock(&klog_lock);
  214.    
  215.     if ((klog_inited) && (event_is_subscribed(EVENT_KLOG)) && (klog_uspace > 0)) {
  216.         event_notify_3(EVENT_KLOG, klog_start, klog_len, klog_uspace);
  217.         klog_uspace = 0;
  218.     }
  219.    
  220.     spinlock_unlock(&klog_lock);
  221. }
  222.  
  223. void putchar(const wchar_t ch)
  224. {
  225.     spinlock_lock(&klog_lock);
  226.    
  227.     if ((klog_stored > 0) && (stdout) && (stdout->op->write)) {
  228.         /* Print charaters stored in kernel log */
  229.         size_t i;
  230.         for (i = klog_len - klog_stored; i < klog_len; i++)
  231.             stdout->op->write(stdout, klog[(klog_start + i) % KLOG_LENGTH], silent);
  232.         klog_stored = 0;
  233.     }
  234.    
  235.     /* Store character in the cyclic kernel log */
  236.     klog[(klog_start + klog_len) % KLOG_LENGTH] = ch;
  237.     if (klog_len < KLOG_LENGTH)
  238.         klog_len++;
  239.     else
  240.         klog_start = (klog_start + 1) % KLOG_LENGTH;
  241.    
  242.     if ((stdout) && (stdout->op->write))
  243.         stdout->op->write(stdout, ch, silent);
  244.     else {
  245.         /* The character is just in the kernel log */
  246.         if (klog_stored < klog_len)
  247.             klog_stored++;
  248.     }
  249.    
  250.     /* The character is stored for uspace */
  251.     if (klog_uspace < klog_len)
  252.         klog_uspace++;
  253.    
  254.     /* Check notify uspace to update */
  255.     bool update;
  256.     if ((klog_uspace > KLOG_LATENCY) || (ch == '\n'))
  257.         update = true;
  258.     else
  259.         update = false;
  260.    
  261.     spinlock_unlock(&klog_lock);
  262.    
  263.     if (update)
  264.         klog_update();
  265. }
  266.  
  267. /** Print using kernel facility
  268.  *
  269.  * Print to kernel log.
  270.  *
  271.  */
  272. unative_t sys_klog(int fd, const void *buf, size_t size)
  273. {
  274.     char *data;
  275.     int rc;
  276.    
  277.     if (size > PAGE_SIZE)
  278.         return ELIMIT;
  279.    
  280.     if (size > 0) {
  281.         data = (char *) malloc(size + 1, 0);
  282.         if (!data)
  283.             return ENOMEM;
  284.        
  285.         rc = copy_from_uspace(data, buf, size);
  286.         if (rc) {
  287.             free(data);
  288.             return rc;
  289.         }
  290.         data[size] = 0;
  291.        
  292.         printf("%s", data);
  293.         free(data);
  294.     } else
  295.         klog_update();
  296.    
  297.     return size;
  298. }
  299.  
  300. /** @}
  301.  */
  302.