Subversion Repositories HelenOS

Rev

Rev 4347 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup genarch
  30.  * @{
  31.  */
  32. /**
  33.  * @file
  34.  * @brief Zilog 8530 serial controller driver.
  35.  */
  36.  
  37. #include <genarch/drivers/z8530/z8530.h>
  38. #include <console/chardev.h>
  39. #include <ddi/irq.h>
  40. #include <arch/asm.h>
  41. #include <mm/slab.h>
  42. #include <ddi/device.h>
  43.  
  44. static inline void z8530_write(ioport8_t *ctl, uint8_t reg, uint8_t val)
  45. {
  46.     /*
  47.      * Registers 8-15 will automatically issue the Point High
  48.      * command as their bit 3 is 1.
  49.      */
  50.     pio_write_8(ctl, reg);  /* Select register */
  51.     pio_write_8(ctl, val);  /* Write value */
  52. }
  53.  
  54. static inline uint8_t z8530_read(ioport8_t *ctl, uint8_t reg)
  55. {
  56.     /*
  57.      * Registers 8-15 will automatically issue the Point High
  58.      * command as their bit 3 is 1.
  59.      */
  60.     pio_write_8(ctl, reg);   /* Select register */
  61.     return pio_read_8(ctl);
  62. }
  63.  
  64. static irq_ownership_t z8530_claim(irq_t *irq)
  65. {
  66.     z8530_instance_t *instance = irq->instance;
  67.     z8530_t *dev = instance->z8530;
  68.    
  69.     if (z8530_read(&dev->ctl_a, RR0) & RR0_RCA)
  70.         return IRQ_ACCEPT;
  71.     else
  72.         return IRQ_DECLINE;
  73. }
  74.  
  75. static void z8530_irq_handler(irq_t *irq)
  76. {
  77.     z8530_instance_t *instance = irq->instance;
  78.     z8530_t *dev = instance->z8530;
  79.    
  80.     if (z8530_read(&dev->ctl_a, RR0) & RR0_RCA) {
  81.         uint8_t data = z8530_read(&dev->ctl_a, RR8);
  82.         indev_push_character(instance->kbrdin, data);
  83.     }
  84. }
  85.  
  86. /** Initialize z8530. */
  87. z8530_instance_t *z8530_init(z8530_t *dev, inr_t inr, cir_t cir, void *cir_arg)
  88. {
  89.     z8530_instance_t *instance
  90.         = malloc(sizeof(z8530_instance_t), FRAME_ATOMIC);
  91.     if (instance) {
  92.         instance->z8530 = dev;
  93.         instance->kbrdin = NULL;
  94.        
  95.         irq_initialize(&instance->irq);
  96.         instance->irq.devno = device_assign_devno();
  97.         instance->irq.inr = inr;
  98.         instance->irq.claim = z8530_claim;
  99.         instance->irq.handler = z8530_irq_handler;
  100.         instance->irq.instance = instance;
  101.         instance->irq.cir = cir;
  102.         instance->irq.cir_arg = cir_arg;
  103.     }
  104.    
  105.     return instance;
  106. }
  107.  
  108. void z8530_wire(z8530_instance_t *instance, indev_t *kbrdin)
  109. {
  110.     ASSERT(instance);
  111.     ASSERT(kbrdin);
  112.    
  113.     instance->kbrdin = kbrdin;
  114.    
  115.     irq_register(&instance->irq);
  116.    
  117.     (void) z8530_read(&instance->z8530->ctl_a, RR8);
  118.    
  119.     /*
  120.      * Clear any pending TX interrupts or we never manage
  121.      * to set FHC UART interrupt state to idle.
  122.      */
  123.     z8530_write(&instance->z8530->ctl_a, WR0, WR0_TX_IP_RST);
  124.    
  125.     /* interrupt on all characters */
  126.     z8530_write(&instance->z8530->ctl_a, WR1, WR1_IARCSC);
  127.    
  128.     /* 8 bits per character and enable receiver */
  129.     z8530_write(&instance->z8530->ctl_a, WR3, WR3_RX8BITSCH | WR3_RX_ENABLE);
  130.    
  131.     /* Master Interrupt Enable. */
  132.     z8530_write(&instance->z8530->ctl_a, WR9, WR9_MIE);
  133. }
  134.  
  135. /** @}
  136.  */
  137.