Subversion Repositories HelenOS

Rev

Rev 3588 | Rev 4343 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2005 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup sparc64
  30.  * @{
  31.  */
  32. /** @file
  33.  */
  34.  
  35. #ifndef KERN_sparc64_ASM_H_
  36. #define KERN_sparc64_ASM_H_
  37.  
  38. #include <arch/arch.h>
  39. #include <arch/types.h>
  40. #include <typedefs.h>
  41. #include <align.h>
  42. #include <arch/register.h>
  43. #include <config.h>
  44. #include <arch/stack.h>
  45. #include <arch/barrier.h>
  46.  
  47. static inline void outb(ioport_t port, uint8_t v)
  48. {
  49.     *((volatile uint8_t *)(port)) = v;
  50.     memory_barrier();
  51. }
  52.  
  53. static inline void outw(ioport_t port, uint16_t v)
  54. {
  55.     *((volatile uint16_t *)(port)) = v;
  56.     memory_barrier();
  57. }
  58.  
  59. static inline void outl(ioport_t port, uint32_t v)
  60. {
  61.     *((volatile uint32_t *)(port)) = v;
  62.     memory_barrier();
  63. }
  64.  
  65. static inline uint8_t inb(ioport_t port)
  66. {
  67.     uint8_t rv;
  68.  
  69.     rv = *((volatile uint8_t *)(port));
  70.     memory_barrier();
  71.  
  72.     return rv;
  73. }
  74.  
  75. static inline uint16_t inw(ioport_t port)
  76. {
  77.     uint16_t rv;
  78.  
  79.     rv = *((volatile uint16_t *)(port));
  80.     memory_barrier();
  81.  
  82.     return rv;
  83. }
  84.  
  85. static inline uint32_t inl(ioport_t port)
  86. {
  87.     uint32_t rv;
  88.  
  89.     rv = *((volatile uint32_t *)(port));
  90.     memory_barrier();
  91.  
  92.     return rv;
  93. }
  94.  
  95. /** Read Processor State register.
  96.  *
  97.  * @return Value of PSTATE register.
  98.  */
  99. static inline uint64_t pstate_read(void)
  100. {
  101.     uint64_t v;
  102.    
  103.     asm volatile ("rdpr %%pstate, %0\n" : "=r" (v));
  104.    
  105.     return v;
  106. }
  107.  
  108. /** Write Processor State register.
  109.  *
  110.  * @param v New value of PSTATE register.
  111.  */
  112. static inline void pstate_write(uint64_t v)
  113. {
  114.     asm volatile ("wrpr %0, %1, %%pstate\n" : : "r" (v), "i" (0));
  115. }
  116.  
  117. /** Read TICK_compare Register.
  118.  *
  119.  * @return Value of TICK_comapre register.
  120.  */
  121. static inline uint64_t tick_compare_read(void)
  122. {
  123.     uint64_t v;
  124.    
  125.     asm volatile ("rd %%tick_cmpr, %0\n" : "=r" (v));
  126.    
  127.     return v;
  128. }
  129.  
  130. /** Write TICK_compare Register.
  131.  *
  132.  * @param v New value of TICK_comapre register.
  133.  */
  134. static inline void tick_compare_write(uint64_t v)
  135. {
  136.     asm volatile ("wr %0, %1, %%tick_cmpr\n" : : "r" (v), "i" (0));
  137. }
  138.  
  139. /** Read STICK_compare Register.
  140.  *
  141.  * @return Value of STICK_compare register.
  142.  */
  143. static inline uint64_t stick_compare_read(void)
  144. {
  145.     uint64_t v;
  146.    
  147.     asm volatile ("rd %%asr25, %0\n" : "=r" (v));
  148.    
  149.     return v;
  150. }
  151.  
  152. /** Write STICK_compare Register.
  153.  *
  154.  * @param v New value of STICK_comapre register.
  155.  */
  156. static inline void stick_compare_write(uint64_t v)
  157. {
  158.     asm volatile ("wr %0, %1, %%asr25\n" : : "r" (v), "i" (0));
  159. }
  160.  
  161. /** Read TICK Register.
  162.  *
  163.  * @return Value of TICK register.
  164.  */
  165. static inline uint64_t tick_read(void)
  166. {
  167.     uint64_t v;
  168.    
  169.     asm volatile ("rdpr %%tick, %0\n" : "=r" (v));
  170.    
  171.     return v;
  172. }
  173.  
  174. /** Write TICK Register.
  175.  *
  176.  * @param v New value of TICK register.
  177.  */
  178. static inline void tick_write(uint64_t v)
  179. {
  180.     asm volatile ("wrpr %0, %1, %%tick\n" : : "r" (v), "i" (0));
  181. }
  182.  
  183. /** Read FPRS Register.
  184.  *
  185.  * @return Value of FPRS register.
  186.  */
  187. static inline uint64_t fprs_read(void)
  188. {
  189.     uint64_t v;
  190.    
  191.     asm volatile ("rd %%fprs, %0\n" : "=r" (v));
  192.    
  193.     return v;
  194. }
  195.  
  196. /** Write FPRS Register.
  197.  *
  198.  * @param v New value of FPRS register.
  199.  */
  200. static inline void fprs_write(uint64_t v)
  201. {
  202.     asm volatile ("wr %0, %1, %%fprs\n" : : "r" (v), "i" (0));
  203. }
  204.  
  205. /** Read SOFTINT Register.
  206.  *
  207.  * @return Value of SOFTINT register.
  208.  */
  209. static inline uint64_t softint_read(void)
  210. {
  211.     uint64_t v;
  212.  
  213.     asm volatile ("rd %%softint, %0\n" : "=r" (v));
  214.  
  215.     return v;
  216. }
  217.  
  218. /** Write SOFTINT Register.
  219.  *
  220.  * @param v New value of SOFTINT register.
  221.  */
  222. static inline void softint_write(uint64_t v)
  223. {
  224.     asm volatile ("wr %0, %1, %%softint\n" : : "r" (v), "i" (0));
  225. }
  226.  
  227. /** Write CLEAR_SOFTINT Register.
  228.  *
  229.  * Bits set in CLEAR_SOFTINT register will be cleared in SOFTINT register.
  230.  *
  231.  * @param v New value of CLEAR_SOFTINT register.
  232.  */
  233. static inline void clear_softint_write(uint64_t v)
  234. {
  235.     asm volatile ("wr %0, %1, %%clear_softint\n" : : "r" (v), "i" (0));
  236. }
  237.  
  238. /** Write SET_SOFTINT Register.
  239.  *
  240.  * Bits set in SET_SOFTINT register will be set in SOFTINT register.
  241.  *
  242.  * @param v New value of SET_SOFTINT register.
  243.  */
  244. static inline void set_softint_write(uint64_t v)
  245. {
  246.     asm volatile ("wr %0, %1, %%set_softint\n" : : "r" (v), "i" (0));
  247. }
  248.  
  249. /** Enable interrupts.
  250.  *
  251.  * Enable interrupts and return previous
  252.  * value of IPL.
  253.  *
  254.  * @return Old interrupt priority level.
  255.  */
  256. static inline ipl_t interrupts_enable(void) {
  257.     pstate_reg_t pstate;
  258.     uint64_t value;
  259.    
  260.     value = pstate_read();
  261.     pstate.value = value;
  262.     pstate.ie = true;
  263.     pstate_write(pstate.value);
  264.    
  265.     return (ipl_t) value;
  266. }
  267.  
  268. /** Disable interrupts.
  269.  *
  270.  * Disable interrupts and return previous
  271.  * value of IPL.
  272.  *
  273.  * @return Old interrupt priority level.
  274.  */
  275. static inline ipl_t interrupts_disable(void) {
  276.     pstate_reg_t pstate;
  277.     uint64_t value;
  278.    
  279.     value = pstate_read();
  280.     pstate.value = value;
  281.     pstate.ie = false;
  282.     pstate_write(pstate.value);
  283.    
  284.     return (ipl_t) value;
  285. }
  286.  
  287. /** Restore interrupt priority level.
  288.  *
  289.  * Restore IPL.
  290.  *
  291.  * @param ipl Saved interrupt priority level.
  292.  */
  293. static inline void interrupts_restore(ipl_t ipl) {
  294.     pstate_reg_t pstate;
  295.    
  296.     pstate.value = pstate_read();
  297.     pstate.ie = ((pstate_reg_t) ipl).ie;
  298.     pstate_write(pstate.value);
  299. }
  300.  
  301. /** Return interrupt priority level.
  302.  *
  303.  * Return IPL.
  304.  *
  305.  * @return Current interrupt priority level.
  306.  */
  307. static inline ipl_t interrupts_read(void) {
  308.     return (ipl_t) pstate_read();
  309. }
  310.  
  311. /** Return base address of current stack.
  312.  *
  313.  * Return the base address of the current stack.
  314.  * The stack is assumed to be STACK_SIZE bytes long.
  315.  * The stack must start on page boundary.
  316.  */
  317. static inline uintptr_t get_stack_base(void)
  318. {
  319.     uintptr_t unbiased_sp;
  320.    
  321.     asm volatile ("add %%sp, %1, %0\n" : "=r" (unbiased_sp) : "i" (STACK_BIAS));
  322.    
  323.     return ALIGN_DOWN(unbiased_sp, STACK_SIZE);
  324. }
  325.  
  326. /** Read Version Register.
  327.  *
  328.  * @return Value of VER register.
  329.  */
  330. static inline uint64_t ver_read(void)
  331. {
  332.     uint64_t v;
  333.    
  334.     asm volatile ("rdpr %%ver, %0\n" : "=r" (v));
  335.    
  336.     return v;
  337. }
  338.  
  339. /** Read Trap Program Counter register.
  340.  *
  341.  * @return Current value in TPC.
  342.  */
  343. static inline uint64_t tpc_read(void)
  344. {
  345.     uint64_t v;
  346.    
  347.     asm volatile ("rdpr %%tpc, %0\n" : "=r" (v));
  348.    
  349.     return v;
  350. }
  351.  
  352. /** Read Trap Level register.
  353.  *
  354.  * @return Current value in TL.
  355.  */
  356. static inline uint64_t tl_read(void)
  357. {
  358.     uint64_t v;
  359.    
  360.     asm volatile ("rdpr %%tl, %0\n" : "=r" (v));
  361.    
  362.     return v;
  363. }
  364.  
  365. /** Read Trap Base Address register.
  366.  *
  367.  * @return Current value in TBA.
  368.  */
  369. static inline uint64_t tba_read(void)
  370. {
  371.     uint64_t v;
  372.    
  373.     asm volatile ("rdpr %%tba, %0\n" : "=r" (v));
  374.    
  375.     return v;
  376. }
  377.  
  378. /** Write Trap Base Address register.
  379.  *
  380.  * @param v New value of TBA.
  381.  */
  382. static inline void tba_write(uint64_t v)
  383. {
  384.     asm volatile ("wrpr %0, %1, %%tba\n" : : "r" (v), "i" (0));
  385. }
  386.  
  387. /** Load uint64_t from alternate space.
  388.  *
  389.  * @param asi ASI determining the alternate space.
  390.  * @param va Virtual address within the ASI.
  391.  *
  392.  * @return Value read from the virtual address in the specified address space.
  393.  */
  394. static inline uint64_t asi_u64_read(asi_t asi, uintptr_t va)
  395. {
  396.     uint64_t v;
  397.    
  398.     asm volatile ("ldxa [%1] %2, %0\n" : "=r" (v) : "r" (va), "i" ((unsigned) asi));
  399.    
  400.     return v;
  401. }
  402.  
  403. /** Store uint64_t to alternate space.
  404.  *
  405.  * @param asi ASI determining the alternate space.
  406.  * @param va Virtual address within the ASI.
  407.  * @param v Value to be written.
  408.  */
  409. static inline void asi_u64_write(asi_t asi, uintptr_t va, uint64_t v)
  410. {
  411.     asm volatile ("stxa %0, [%1] %2\n" : :  "r" (v), "r" (va), "i" ((unsigned) asi) : "memory");
  412. }
  413.  
  414. /** Flush all valid register windows to memory. */
  415. static inline void flushw(void)
  416. {
  417.     asm volatile ("flushw\n");
  418. }
  419.  
  420. /** Switch to nucleus by setting TL to 1. */
  421. static inline void nucleus_enter(void)
  422. {
  423.     asm volatile ("wrpr %g0, 1, %tl\n");
  424. }
  425.  
  426. /** Switch from nucleus by setting TL to 0. */
  427. static inline void nucleus_leave(void)
  428. {
  429.     asm volatile ("wrpr %g0, %g0, %tl\n");
  430. }
  431.  
  432. extern void cpu_halt(void);
  433. extern void cpu_sleep(void);
  434. extern void asm_delay_loop(const uint32_t usec);
  435.  
  436. extern uint64_t read_from_ag_g7(void);
  437. extern void write_to_ag_g6(uint64_t val);
  438. extern void write_to_ag_g7(uint64_t val);
  439. extern void write_to_ig_g6(uint64_t val);
  440.  
  441. extern void switch_to_userspace(uint64_t pc, uint64_t sp, uint64_t uarg);
  442.  
  443. #endif
  444.  
  445. /** @}
  446.  */
  447.