Subversion Repositories HelenOS

Rev

Rev 4055 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2007 Petr Stepan
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup arm32
  30.  * @{
  31.  */
  32. /** @file
  33.  *  @brief Exception handlers and exception initialization routines.
  34.  */
  35.  
  36. #include <arch/exception.h>
  37. #include <arch/memstr.h>
  38. #include <arch/regutils.h>
  39. #include <interrupt.h>
  40. #include <arch/mm/page_fault.h>
  41. #include <arch/barrier.h>
  42. #include <arch/drivers/gxemul.h>
  43. #include <print.h>
  44. #include <syscall/syscall.h>
  45.  
  46. /** Offset used in calculation of exception handler's relative address.
  47.  *
  48.  * @see install_handler()
  49.  */
  50. #define PREFETCH_OFFSET      0x8
  51.  
  52. /** LDR instruction's code */
  53. #define LDR_OPCODE           0xe59ff000
  54.  
  55. /** Number of exception vectors. */
  56. #define EXC_VECTORS          8
  57.  
  58. /** Size of memory block occupied by exception vectors. */
  59. #define EXC_VECTORS_SIZE     (EXC_VECTORS * 4)
  60.  
  61. /** Switches to kernel stack and saves all registers there.
  62.  *
  63.  * Temporary exception stack is used to save a few registers
  64.  * before stack switch takes place.
  65.  *
  66.  */
  67. inline static void setup_stack_and_save_regs()
  68. {
  69.     asm volatile (
  70.         "ldr r13, =exc_stack\n"
  71.         "stmfd r13!, {r0}\n"
  72.         "mrs r0, spsr\n"
  73.         "and r0, r0, #0x1f\n"
  74.         "cmp r0, #0x10\n"
  75.         "bne 1f\n"
  76.        
  77.         /* prev mode was usermode */
  78.         "ldmfd r13!, {r0}\n"
  79.         "ldr r13, =supervisor_sp\n"
  80.         "ldr r13, [r13]\n"
  81.         "stmfd r13!, {lr}\n"
  82.         "stmfd r13!, {r0-r12}\n"
  83.         "stmfd r13!, {r13, lr}^\n"
  84.         "mrs r0, spsr\n"
  85.         "stmfd r13!, {r0}\n"
  86.         "b 2f\n"
  87.        
  88.         /* mode was not usermode */
  89.         "1:\n"
  90.             "stmfd r13!, {r1, r2, r3}\n"
  91.             "mrs r1, cpsr\n"
  92.             "mov r2, lr\n"
  93.             "bic r1, r1, #0x1f\n"
  94.             "orr r1, r1, r0\n"
  95.             "mrs r0, cpsr\n"
  96.             "msr cpsr_c, r1\n"
  97.            
  98.             "mov r3, r13\n"
  99.             "stmfd r13!, {r2}\n"
  100.             "mov r2, lr\n"
  101.             "stmfd r13!, {r4-r12}\n"
  102.             "mov r1, r13\n"
  103.            
  104.             /* the following two lines are for debugging */
  105.             "mov sp, #0\n"
  106.             "mov lr, #0\n"
  107.             "msr cpsr_c, r0\n"
  108.            
  109.             "ldmfd r13!, {r4, r5, r6, r7}\n"
  110.             "stmfd r1!, {r4, r5, r6}\n"
  111.             "stmfd r1!, {r7}\n"
  112.             "stmfd r1!, {r2}\n"
  113.             "stmfd r1!, {r3}\n"
  114.             "mrs r0, spsr\n"
  115.             "stmfd r1!, {r0}\n"
  116.             "mov r13, r1\n"
  117.            
  118.         "2:\n"
  119.     );
  120. }
  121.  
  122. /** Returns from exception mode.
  123.  *
  124.  * Previously saved state of registers (including control register)
  125.  * is restored from the stack.
  126.  */
  127. inline static void load_regs()
  128. {
  129.     asm volatile(
  130.         "ldmfd r13!, {r0}       \n"
  131.         "msr spsr, r0           \n"
  132.         "and r0, r0, #0x1f      \n"
  133.         "cmp r0, #0x10          \n"
  134.         "bne 1f             \n"
  135.  
  136.         /* return to user mode */
  137.         "ldmfd r13!, {r13, lr}^     \n"
  138.         "b 2f               \n"
  139.  
  140.         /* return to non-user mode */
  141.     "1:\n"
  142.         "ldmfd r13!, {r1, r2}       \n"
  143.         "mrs r3, cpsr           \n"
  144.         "bic r3, r3, #0x1f      \n"
  145.         "orr r3, r3, r0         \n"
  146.         "mrs r0, cpsr           \n"
  147.         "msr cpsr_c, r3         \n"
  148.  
  149.         "mov r13, r1            \n"
  150.         "mov lr, r2         \n"
  151.         "msr cpsr_c, r0         \n"
  152.  
  153.         /* actual return */
  154.     "2:\n"
  155.         "ldmfd r13, {r0-r12, pc}^\n"
  156.     );
  157. }
  158.  
  159.  
  160. /** Switch CPU to mode in which interrupts are serviced (currently it
  161.  * is Undefined mode).
  162.  *
  163.  * The default mode for interrupt servicing (Interrupt Mode)
  164.  * can not be used because of nested interrupts (which can occur
  165.  * because interrupts are enabled in higher levels of interrupt handler).
  166.  */
  167. inline static void switch_to_irq_servicing_mode()
  168. {
  169.     /* switch to Undefined mode */
  170.     asm volatile(
  171.         /* save regs used during switching */
  172.         "stmfd sp!, {r0-r3}     \n"
  173.  
  174.         /* save stack pointer and link register to r1, r2 */
  175.         "mov r1, sp         \n"
  176.         "mov r2, lr         \n"
  177.  
  178.         /* mode switch */
  179.         "mrs r0, cpsr           \n"
  180.         "bic r0, r0, #0x1f      \n"
  181.         "orr r0, r0, #0x1b      \n"
  182.         "msr cpsr_c, r0         \n"
  183.  
  184.         /* restore saved sp and lr */
  185.         "mov sp, r1         \n"
  186.         "mov lr, r2         \n"
  187.  
  188.         /* restore original regs */
  189.         "ldmfd sp!, {r0-r3}     \n"
  190.     );
  191. }
  192.  
  193. /** Calls exception dispatch routine. */
  194. #define CALL_EXC_DISPATCH(exception) \
  195.     asm volatile ( \
  196.         "mov r0, %[exc]\n" \
  197.         "mov r1, r13\n" \
  198.         "bl exc_dispatch\n" \
  199.         :: [exc] "i" (exception) \
  200.     );\
  201.  
  202. /** General exception handler.
  203.  *
  204.  *  Stores registers, dispatches the exception,
  205.  *  and finally restores registers and returns from exception processing.
  206.  *
  207.  *  @param exception Exception number.
  208.  */
  209. #define PROCESS_EXCEPTION(exception) \
  210.     setup_stack_and_save_regs(); \
  211.     CALL_EXC_DISPATCH(exception) \
  212.     load_regs();
  213.  
  214. /** Updates specified exception vector to jump to given handler.
  215.  *
  216.  *  Addresses of handlers are stored in memory following exception vectors.
  217.  */
  218. static void install_handler(unsigned handler_addr, unsigned *vector)
  219. {
  220.     /* relative address (related to exc. vector) of the word
  221.      * where handler's address is stored
  222.     */
  223.     volatile uint32_t handler_address_ptr = EXC_VECTORS_SIZE -
  224.         PREFETCH_OFFSET;
  225.    
  226.     /* make it LDR instruction and store at exception vector */
  227.     *vector = handler_address_ptr | LDR_OPCODE;
  228.     smc_coherence(*vector);
  229.    
  230.     /* store handler's address */
  231.     *(vector + EXC_VECTORS) = handler_addr;
  232.  
  233. }
  234.  
  235. /** Low-level Reset Exception handler. */
  236. static void reset_exception_entry(void)
  237. {
  238.     PROCESS_EXCEPTION(EXC_RESET);
  239. }
  240.  
  241. /** Low-level Software Interrupt Exception handler. */
  242. static void swi_exception_entry(void)
  243. {
  244.     PROCESS_EXCEPTION(EXC_SWI);
  245. }
  246.  
  247. /** Low-level Undefined Instruction Exception handler. */
  248. static void undef_instr_exception_entry(void)
  249. {
  250.     PROCESS_EXCEPTION(EXC_UNDEF_INSTR);
  251. }
  252.  
  253. /** Low-level Fast Interrupt Exception handler. */
  254. static void fiq_exception_entry(void)
  255. {
  256.     PROCESS_EXCEPTION(EXC_FIQ);
  257. }
  258.  
  259. /** Low-level Prefetch Abort Exception handler. */
  260. static void prefetch_abort_exception_entry(void)
  261. {
  262.     asm volatile (
  263.         "sub lr, lr, #4"
  264.     );
  265.    
  266.     PROCESS_EXCEPTION(EXC_PREFETCH_ABORT);
  267. }
  268.  
  269. /** Low-level Data Abort Exception handler. */
  270. static void data_abort_exception_entry(void)
  271. {
  272.     asm volatile (
  273.         "sub lr, lr, #8"
  274.     );
  275.    
  276.     PROCESS_EXCEPTION(EXC_DATA_ABORT);
  277. }
  278.  
  279. /** Low-level Interrupt Exception handler.
  280.  *
  281.  * CPU is switched to Undefined mode before further interrupt processing
  282.  * because of possible occurence of nested interrupt exception, which
  283.  * would overwrite (and thus spoil) stack pointer.
  284.  */
  285. static void irq_exception_entry(void)
  286. {
  287.     asm volatile (
  288.         "sub lr, lr, #4"
  289.     );
  290.    
  291.     setup_stack_and_save_regs();
  292.    
  293.     switch_to_irq_servicing_mode();
  294.    
  295.     CALL_EXC_DISPATCH(EXC_IRQ)
  296.  
  297.     load_regs();
  298. }
  299.  
  300. /** Software Interrupt handler.
  301.  *
  302.  * Dispatches the syscall.
  303.  */
  304. static void swi_exception(int exc_no, istate_t *istate)
  305. {
  306.     istate->r0 = syscall_handler(istate->r0, istate->r1, istate->r2,
  307.         istate->r3, istate->r4, istate->r5, istate->r6);
  308. }
  309.  
  310. /** Returns the mask of active interrupts. */
  311. static inline uint32_t gxemul_irqc_get_sources(void)
  312. {
  313.     return *((uint32_t *) gxemul_irqc);
  314. }
  315.  
  316. /** Interrupt Exception handler.
  317.  *
  318.  * Determines the sources of interrupt and calls their handlers.
  319.  */
  320. static void irq_exception(int exc_no, istate_t *istate)
  321. {
  322.     uint32_t sources = gxemul_irqc_get_sources();
  323.     unsigned int i;
  324.    
  325.     for (i = 0; i < GXEMUL_IRQC_MAX_IRQ; i++) {
  326.         if (sources & (1 << i)) {
  327.             irq_t *irq = irq_dispatch_and_lock(i);
  328.             if (irq) {
  329.                 /* The IRQ handler was found. */
  330.                 irq->handler(irq);
  331.                 spinlock_unlock(&irq->lock);
  332.             } else {
  333.                 /* Spurious interrupt.*/
  334.                 printf("cpu%d: spurious interrupt (inum=%d)\n",
  335.                     CPU->id, i);
  336.             }
  337.         }
  338.     }
  339. }
  340.  
  341. /** Fills exception vectors with appropriate exception handlers. */
  342. void install_exception_handlers(void)
  343. {
  344.     install_handler((unsigned) reset_exception_entry,
  345.         (unsigned *) EXC_RESET_VEC);
  346.    
  347.     install_handler((unsigned) undef_instr_exception_entry,
  348.         (unsigned *) EXC_UNDEF_INSTR_VEC);
  349.    
  350.     install_handler((unsigned) swi_exception_entry,
  351.         (unsigned *) EXC_SWI_VEC);
  352.    
  353.     install_handler((unsigned) prefetch_abort_exception_entry,
  354.         (unsigned *) EXC_PREFETCH_ABORT_VEC);
  355.    
  356.     install_handler((unsigned) data_abort_exception_entry,
  357.         (unsigned *) EXC_DATA_ABORT_VEC);
  358.    
  359.     install_handler((unsigned) irq_exception_entry,
  360.         (unsigned *) EXC_IRQ_VEC);
  361.    
  362.     install_handler((unsigned) fiq_exception_entry,
  363.         (unsigned *) EXC_FIQ_VEC);
  364. }
  365.  
  366. #ifdef HIGH_EXCEPTION_VECTORS
  367. /** Activates use of high exception vectors addresses. */
  368. static void high_vectors(void)
  369. {
  370.     uint32_t control_reg;
  371.    
  372.     asm volatile (
  373.         "mrc p15, 0, %[control_reg], c1, c1"
  374.         : [control_reg] "=r" (control_reg)
  375.     );
  376.    
  377.     /* switch on the high vectors bit */
  378.     control_reg |= CP15_R1_HIGH_VECTORS_BIT;
  379.    
  380.     asm volatile (
  381.         "mcr p15, 0, %[control_reg], c1, c1"
  382.         :: [control_reg] "r" (control_reg)
  383.     );
  384. }
  385. #endif
  386.  
  387. /** Initializes exception handling.
  388.  *
  389.  * Installs low-level exception handlers and then registers
  390.  * exceptions and their handlers to kernel exception dispatcher.
  391.  */
  392. void exception_init(void)
  393. {
  394. #ifdef HIGH_EXCEPTION_VECTORS
  395.     high_vectors();
  396. #endif
  397.     install_exception_handlers();
  398.    
  399.     exc_register(EXC_IRQ, "interrupt", (iroutine) irq_exception);
  400.     exc_register(EXC_PREFETCH_ABORT, "prefetch abort",
  401.         (iroutine) prefetch_abort);
  402.     exc_register(EXC_DATA_ABORT, "data abort", (iroutine) data_abort);
  403.     exc_register(EXC_SWI, "software interrupt", (iroutine) swi_exception);
  404. }
  405.  
  406. /** Prints #istate_t structure content.
  407.  *
  408.  * @param istate Structure to be printed.
  409.  */
  410. void print_istate(istate_t *istate)
  411. {
  412.     printf("istate dump:\n");
  413.    
  414.     printf(" r0: %x    r1: %x    r2: %x    r3: %x\n",
  415.         istate->r0, istate->r1, istate->r2, istate->r3);
  416.     printf(" r4: %x    r5: %x    r6: %x    r7: %x\n",
  417.         istate->r4, istate->r5, istate->r6, istate->r7);
  418.     printf(" r8: %x    r8: %x   r10: %x   r11: %x\n",
  419.         istate->r8, istate->r9, istate->r10, istate->r11);
  420.     printf(" r12: %x    sp: %x    lr: %x  spsr: %x\n",
  421.         istate->r12, istate->sp, istate->lr, istate->spsr);
  422.    
  423.     printf(" pc: %x\n", istate->pc);
  424. }
  425.  
  426. /** @}
  427.  */
  428.