Subversion Repositories HelenOS

Rev

Rev 3913 | Rev 4023 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2003-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup mips32
  30.  * @{
  31.  */
  32. /** @file
  33.  */
  34.  
  35. #include <arch.h>
  36. #include <arch/cp0.h>
  37. #include <arch/exception.h>
  38. #include <mm/as.h>
  39.  
  40. #include <userspace.h>
  41. #include <arch/console.h>
  42. #include <memstr.h>
  43. #include <proc/thread.h>
  44. #include <proc/uarg.h>
  45. #include <print.h>
  46. #include <syscall/syscall.h>
  47. #include <sysinfo/sysinfo.h>
  48.  
  49. #include <arch/interrupt.h>
  50. #include <console/chardev.h>
  51. #include <arch/barrier.h>
  52. #include <arch/debugger.h>
  53. #include <genarch/fb/fb.h>
  54. #include <genarch/fb/visuals.h>
  55. #include <macros.h>
  56. #include <ddi/device.h>
  57.  
  58. #include <arch/asm/regname.h>
  59.  
  60. /* Size of the code jumping to the exception handler code
  61.  * - J+NOP
  62.  */
  63. #define EXCEPTION_JUMP_SIZE  8
  64.  
  65. #define TLB_EXC    ((char *) 0x80000000)
  66. #define NORM_EXC   ((char *) 0x80000180)
  67. #define CACHE_EXC  ((char *) 0x80000100)
  68.  
  69.  
  70. /* Why the linker moves the variable 64K away in assembler
  71.  * when not in .text section?
  72.  */
  73.  
  74. /* Stack pointer saved when entering user mode */
  75. uintptr_t supervisor_sp __attribute__ ((section (".text")));
  76.  
  77. count_t cpu_count = 0;
  78.  
  79. void arch_pre_main(void *entry __attribute__((unused)), bootinfo_t *bootinfo)
  80. {
  81.     /* Setup usermode */
  82.     init.cnt = bootinfo->cnt;
  83.    
  84.     count_t i;
  85.     for (i = 0; i < min3(bootinfo->cnt, TASKMAP_MAX_RECORDS, CONFIG_INIT_TASKS); i++) {
  86.         init.tasks[i].addr = bootinfo->tasks[i].addr;
  87.         init.tasks[i].size = bootinfo->tasks[i].size;
  88.     }
  89.    
  90.     for (i = 0; i < CPUMAP_MAX_RECORDS; i++) {
  91.         if ((bootinfo->cpumap & (1 << i)) != 0)
  92.             cpu_count++;
  93.     }
  94. }
  95.  
  96. void arch_pre_mm_init(void)
  97. {
  98.     /* It is not assumed by default */
  99.     interrupts_disable();
  100.    
  101.     /* Initialize dispatch table */
  102.     exception_init();
  103.  
  104.     /* Copy the exception vectors to the right places */
  105.     memcpy(TLB_EXC, (char *) tlb_refill_entry, EXCEPTION_JUMP_SIZE);
  106.     smc_coherence_block(TLB_EXC, EXCEPTION_JUMP_SIZE);
  107.     memcpy(NORM_EXC, (char *) exception_entry, EXCEPTION_JUMP_SIZE);
  108.     smc_coherence_block(NORM_EXC, EXCEPTION_JUMP_SIZE);
  109.     memcpy(CACHE_EXC, (char *) cache_error_entry, EXCEPTION_JUMP_SIZE);
  110.     smc_coherence_block(CACHE_EXC, EXCEPTION_JUMP_SIZE);
  111.    
  112.     /*
  113.      * Switch to BEV normal level so that exception vectors point to the
  114.      * kernel. Clear the error level.
  115.      */
  116.     cp0_status_write(cp0_status_read() &
  117.         ~(cp0_status_bev_bootstrap_bit | cp0_status_erl_error_bit));
  118.    
  119.     /*
  120.      * Mask all interrupts
  121.      */
  122.     cp0_mask_all_int();
  123.    
  124.     debugger_init();
  125. }
  126.  
  127. void arch_post_mm_init(void)
  128. {
  129.     interrupt_init();
  130.     console_init(device_assign_devno());
  131. #ifdef CONFIG_FB
  132.     /* GXemul framebuffer */
  133.     fb_properties_t gxemul_prop = {
  134.         .addr = 0x12000000,
  135.         .offset = 0,
  136.         .x = 640,
  137.         .y = 480,
  138.         .scan = 1920,
  139.         .visual = VISUAL_BGR_8_8_8,
  140.     };
  141.     fb_init(&gxemul_prop);
  142. #endif
  143.  
  144. #ifdef MACHINE_msim
  145.     sysinfo_set_item_val("machine.msim", NULL, 1);
  146. #endif
  147.  
  148. #ifdef MACHINE_simics
  149.     sysinfo_set_item_val("machine.simics", NULL, 1);
  150. #endif
  151.  
  152. #ifdef MACHINE_bgxemul
  153.     sysinfo_set_item_val("machine.bgxemul", NULL, 1);
  154. #endif
  155.  
  156. #ifdef MACHINE_lgxemul
  157.     sysinfo_set_item_val("machine.lgxemul", NULL, 1);
  158. #endif
  159. }
  160.  
  161. void arch_post_cpu_init(void)
  162. {
  163. }
  164.  
  165. void arch_pre_smp_init(void)
  166. {
  167. }
  168.  
  169. void arch_post_smp_init(void)
  170. {
  171. }
  172.  
  173. void calibrate_delay_loop(void)
  174. {
  175. }
  176.  
  177. void userspace(uspace_arg_t *kernel_uarg)
  178. {
  179.     /* EXL = 1, UM = 1, IE = 1 */
  180.     cp0_status_write(cp0_status_read() | (cp0_status_exl_exception_bit |
  181.         cp0_status_um_bit | cp0_status_ie_enabled_bit));
  182.     cp0_epc_write((uintptr_t) kernel_uarg->uspace_entry);
  183.     userspace_asm(((uintptr_t) kernel_uarg->uspace_stack + PAGE_SIZE),
  184.         (uintptr_t) kernel_uarg->uspace_uarg,
  185.         (uintptr_t) kernel_uarg->uspace_entry);
  186.    
  187.     while (1);
  188. }
  189.  
  190. /** Perform mips32 specific tasks needed before the new task is run. */
  191. void before_task_runs_arch(void)
  192. {
  193. }
  194.  
  195. /** Perform mips32 specific tasks needed before the new thread is scheduled. */
  196. void before_thread_runs_arch(void)
  197. {
  198.     supervisor_sp = (uintptr_t) &THREAD->kstack[THREAD_STACK_SIZE -
  199.         SP_DELTA];
  200. }
  201.  
  202. void after_thread_ran_arch(void)
  203. {
  204. }
  205.  
  206. /** Set thread-local-storage pointer
  207.  *
  208.  * We have it currently in K1, it is
  209.  * possible to have it separately in the future.
  210.  */
  211. unative_t sys_tls_set(unative_t addr)
  212. {
  213.     return 0;
  214. }
  215.  
  216. void arch_reboot(void)
  217. {
  218.     ___halt();
  219.    
  220.     while (1);
  221. }
  222.  
  223. /** Construct function pointer
  224.  *
  225.  * @param fptr   function pointer structure
  226.  * @param addr   function address
  227.  * @param caller calling function address
  228.  *
  229.  * @return address of the function pointer
  230.  *
  231.  */
  232. void *arch_construct_function(fncptr_t *fptr, void *addr, void *caller)
  233. {
  234.     return addr;
  235. }
  236.  
  237. /** @}
  238.  */
  239.