Subversion Repositories HelenOS

Rev

Rev 822 | Rev 1477 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2005 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. #include <smp/smp.h>
  30. #include <arch/smp/smp.h>
  31. #include <arch/smp/mps.h>
  32. #include <arch/smp/ap.h>
  33. #include <arch/boot/boot.h>
  34. #include <genarch/acpi/acpi.h>
  35. #include <genarch/acpi/madt.h>
  36. #include <config.h>
  37. #include <synch/waitq.h>
  38. #include <synch/synch.h>
  39. #include <arch/pm.h>
  40. #include <func.h>
  41. #include <panic.h>
  42. #include <debug.h>
  43. #include <arch/asm.h>
  44. #include <mm/frame.h>
  45. #include <mm/page.h>
  46. #include <mm/slab.h>
  47. #include <mm/as.h>
  48. #include <print.h>
  49. #include <memstr.h>
  50. #include <arch/i8259.h>
  51.  
  52. #ifdef CONFIG_SMP
  53.  
  54. static struct smp_config_operations *ops = NULL;
  55.  
  56. void smp_init(void)
  57. {
  58.     int status;
  59.     __address l_apic_address, io_apic_address;
  60.  
  61.     if (acpi_madt) {
  62.         acpi_madt_parse();
  63.         ops = &madt_config_operations;
  64.     }
  65.     if (config.cpu_count == 1) {
  66.         mps_init();
  67.         ops = &mps_config_operations;
  68.     }
  69.  
  70.     l_apic_address = PA2KA(PFN2ADDR(frame_alloc_rc(ONE_FRAME, FRAME_ATOMIC | FRAME_KA, &status)));
  71.     if (status != FRAME_OK)
  72.         panic("cannot allocate address for l_apic\n");
  73.  
  74.     io_apic_address = PA2KA(PFN2ADDR(frame_alloc_rc(ONE_FRAME, FRAME_ATOMIC | FRAME_KA, &status)));
  75.     if (status != FRAME_OK)
  76.         panic("cannot allocate address for io_apic\n");
  77.  
  78.     if (config.cpu_count > 1) {    
  79.         page_mapping_insert(AS_KERNEL, l_apic_address, (__address) l_apic,
  80.                   PAGE_NOT_CACHEABLE);
  81.         page_mapping_insert(AS_KERNEL, io_apic_address, (__address) io_apic,
  82.                   PAGE_NOT_CACHEABLE);
  83.                  
  84.         l_apic = (__u32 *) l_apic_address;
  85.         io_apic = (__u32 *) io_apic_address;
  86.         }
  87.  
  88.         /*
  89.          * Must be initialized outside the kmp thread, since it is waited
  90.          * on before the kmp thread is created.
  91.          */
  92.         waitq_initialize(&kmp_completion_wq);
  93.  
  94. }
  95.  
  96. /*
  97.  * Kernel thread for bringing up application processors. It becomes clear
  98.  * that we need an arrangement like this (AP's being initialized by a kernel
  99.  * thread), for a thread has its dedicated stack. (The stack used during the
  100.  * BSP initialization (prior the very first call to scheduler()) will be used
  101.  * as an initialization stack for each AP.)
  102.  */
  103. void kmp(void *arg)
  104. {
  105.     int i;
  106.    
  107.     ASSERT(ops != NULL);
  108.  
  109.     waitq_initialize(&ap_completion_wq);
  110.  
  111.     /*
  112.      * We need to access data in frame 0.
  113.      * We boldly make use of kernel address space mapping.
  114.      */
  115.  
  116.     /*
  117.      * Set the warm-reset vector to the real-mode address of 4K-aligned ap_boot()
  118.      */
  119.     *((__u16 *) (PA2KA(0x467+0))) =  ((__address) ap_boot) >> 4;    /* segment */
  120.     *((__u16 *) (PA2KA(0x467+2))) =  0;             /* offset */
  121.    
  122.     /*
  123.      * Save 0xa to address 0xf of the CMOS RAM.
  124.      * BIOS will not do the POST after the INIT signal.
  125.      */
  126.     outb(0x70,0xf);
  127.     outb(0x71,0xa);
  128.  
  129.     pic_disable_irqs(0xffff);
  130.     apic_init();
  131.  
  132.     for (i = 0; i < ops->cpu_count(); i++) {
  133.         struct descriptor *gdt_new;
  134.    
  135.         /*
  136.          * Skip processors marked unusable.
  137.          */
  138.         if (!ops->cpu_enabled(i))
  139.             continue;
  140.  
  141.         /*
  142.          * The bootstrap processor is already up.
  143.          */
  144.         if (ops->cpu_bootstrap(i))
  145.             continue;
  146.  
  147.         if (ops->cpu_apic_id(i) == l_apic_id()) {
  148.             printf("%s: bad processor entry #%d, will not send IPI to myself\n", __FUNCTION__, i);
  149.             continue;
  150.         }
  151.        
  152.         /*
  153.          * Prepare new GDT for CPU in question.
  154.          */
  155.         if (!(gdt_new = (struct descriptor *) malloc(GDT_ITEMS*sizeof(struct descriptor), FRAME_ATOMIC)))
  156.             panic("couldn't allocate memory for GDT\n");
  157.  
  158.         memcpy(gdt_new, gdt, GDT_ITEMS * sizeof(struct descriptor));
  159.         memsetb((__address)(&gdt_new[TSS_DES]), sizeof(struct descriptor), 0);
  160.         protected_ap_gdtr.limit = GDT_ITEMS * sizeof(struct descriptor);
  161.         protected_ap_gdtr.base = KA2PA((__address) gdt_new);
  162.         gdtr.base = (__address) gdt_new;
  163.  
  164.         if (l_apic_send_init_ipi(ops->cpu_apic_id(i))) {
  165.             /*
  166.              * There may be just one AP being initialized at
  167.              * the time. After it comes completely up, it is
  168.              * supposed to wake us up.
  169.              */
  170.             if (waitq_sleep_timeout(&ap_completion_wq, 1000000, SYNCH_BLOCKING) == ESYNCH_TIMEOUT)
  171.                 printf("%s: waiting for cpu%d (APIC ID = %d) timed out\n", __FUNCTION__, config.cpu_active > i ? config.cpu_active : i, ops->cpu_apic_id(i));
  172.         } else
  173.             printf("INIT IPI for l_apic%d failed\n", ops->cpu_apic_id(i));
  174.     }
  175.  
  176.     /*
  177.      * Wakeup the kinit thread so that
  178.      * system initialization can go on.
  179.      */
  180.     waitq_wakeup(&kmp_completion_wq, WAKEUP_FIRST);
  181. }
  182.  
  183. int smp_irq_to_pin(int irq)
  184. {
  185.     ASSERT(ops != NULL);
  186.     return ops->irq_to_pin(irq);
  187. }
  188.  
  189. #endif /* CONFIG_SMP */
  190.