Subversion Repositories HelenOS

Rev

Rev 3236 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2005 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup mips32mm   
  30.  * @{
  31.  */
  32. /** @file
  33.  */
  34.  
  35. #include <macros.h>
  36. #include <arch/mm/frame.h>
  37. #include <arch/mm/tlb.h>
  38. #include <interrupt.h>
  39. #include <mm/frame.h>
  40. #include <mm/asid.h>
  41. #include <config.h>
  42. #include <arch/drivers/msim.h>
  43. #include <arch/drivers/serial.h>
  44. #include <print.h>
  45.  
  46. #define ZERO_PAGE_MASK      TLB_PAGE_MASK_256K
  47. #define ZERO_FRAMES         2048
  48. #define ZERO_PAGE_WIDTH     18  /* 256K */
  49. #define ZERO_PAGE_SIZE      (1 << ZERO_PAGE_WIDTH)
  50. #define ZERO_PAGE_ASID      ASID_INVALID
  51. #define ZERO_PAGE_TLBI      0
  52. #define ZERO_PAGE_ADDR      0
  53. #define ZERO_PAGE_OFFSET    (ZERO_PAGE_SIZE / sizeof(uint32_t) - 1)
  54. #define ZERO_PAGE_VALUE     (((volatile uint32_t *) ZERO_PAGE_ADDR)[ZERO_PAGE_OFFSET])
  55.  
  56. #define ZERO_PAGE_VALUE_KSEG1(frame) (((volatile uint32_t *) (0xa0000000 + (frame << ZERO_PAGE_WIDTH)))[ZERO_PAGE_OFFSET])
  57.  
  58. #define MAX_REGIONS         32
  59.  
  60. typedef struct {
  61.     pfn_t start;
  62.     pfn_t count;
  63. } phys_region_t;
  64.  
  65. static count_t phys_regions_count = 0;
  66. static phys_region_t phys_regions[MAX_REGIONS];
  67.  
  68.  
  69. /** Check whether frame is available
  70.  *
  71.  * Returns true if given frame is generally available for use.
  72.  * Returns false if given frame is used for physical memory
  73.  * mapped devices and cannot be used.
  74.  *
  75.  */
  76. static bool frame_available(pfn_t frame)
  77. {
  78. #if MACHINE == msim
  79.     /* MSIM device (dprinter) */
  80.     if (frame == (KA2PA(MSIM_VIDEORAM) >> ZERO_PAGE_WIDTH))
  81.         return false;
  82.    
  83.     /* MSIM device (dkeyboard) */
  84.     if (frame == (KA2PA(MSIM_KBD_ADDRESS) >> ZERO_PAGE_WIDTH))
  85.         return false;
  86. #endif
  87.  
  88. #if MACHINE == simics
  89.     /* Simics device (serial line) */
  90.     if (frame == (KA2PA(SERIAL_ADDRESS) >> ZERO_PAGE_WIDTH))
  91.         return false;
  92. #endif
  93.  
  94. #if (MACHINE == lgxemul) || (MACHINE == bgxemul)
  95.     /* gxemul devices */
  96.     if (overlaps(frame << ZERO_PAGE_WIDTH, ZERO_PAGE_SIZE,
  97.         0x10000000, MB2SIZE(256)))
  98.         return false;
  99. #endif
  100.    
  101.     return true;
  102. }
  103.  
  104.  
  105. /** Check whether frame is safe to write
  106.  *
  107.  * Returns true if given frame is safe for read/write test.
  108.  * Returns false if given frame should not be touched.
  109.  *
  110.  */
  111. static bool frame_safe(pfn_t frame)
  112. {
  113.     /* Kernel structures */
  114.     if ((frame << ZERO_PAGE_WIDTH) < KA2PA(config.base))
  115.         return false;
  116.    
  117.     /* Kernel */
  118.     if (overlaps(frame << ZERO_PAGE_WIDTH, ZERO_PAGE_SIZE,
  119.         KA2PA(config.base), config.kernel_size))
  120.         return false;
  121.    
  122.     /* Kernel stack */
  123.     if (overlaps(frame << ZERO_PAGE_WIDTH, ZERO_PAGE_SIZE,
  124.         KA2PA(config.stack_base), config.stack_size))
  125.         return false;
  126.    
  127.     /* Init tasks */
  128.     bool safe = true;
  129.     count_t i;
  130.     for (i = 0; i < init.cnt; i++)
  131.         if (overlaps(frame << ZERO_PAGE_WIDTH, ZERO_PAGE_SIZE,
  132.             KA2PA(init.tasks[i].addr), init.tasks[i].size)) {
  133.             safe = false;
  134.             break;
  135.         }
  136.    
  137.     return safe;
  138. }
  139.  
  140. static void frame_add_region(pfn_t start_frame, pfn_t end_frame)
  141. {
  142.     if (end_frame > start_frame) {
  143.         /* Convert 1M frames to 16K frames */
  144.         pfn_t first = ADDR2PFN(start_frame << ZERO_PAGE_WIDTH);
  145.         pfn_t count = ADDR2PFN((end_frame - start_frame) << ZERO_PAGE_WIDTH);
  146.        
  147.         /* Interrupt vector frame is blacklisted */
  148.         pfn_t conf_frame;
  149.         if (first == 0)
  150.             conf_frame = 1;
  151.         else
  152.             conf_frame = first;
  153.        
  154.         zone_create(first, count, conf_frame, 0);
  155.        
  156.         if (phys_regions_count < MAX_REGIONS) {
  157.             phys_regions[phys_regions_count].start = first;
  158.             phys_regions[phys_regions_count].count = count;
  159.             phys_regions_count++;
  160.         }
  161.     }
  162. }
  163.  
  164.  
  165. /** Create memory zones
  166.  *
  167.  * Walk through available 256 KB chunks of physical
  168.  * memory and create zones.
  169.  *
  170.  * Note: It is assumed that the TLB is not yet being
  171.  * used in any way, thus there is no interference.
  172.  *
  173.  */
  174. void frame_arch_init(void)
  175. {
  176.     ipl_t ipl = interrupts_disable();
  177.    
  178.     /* Clear and initialize TLB */
  179.     cp0_pagemask_write(ZERO_PAGE_MASK);
  180.     cp0_entry_lo0_write(0);
  181.     cp0_entry_lo1_write(0);
  182.     cp0_entry_hi_write(0);
  183.  
  184.     count_t i;
  185.     for (i = 0; i < TLB_ENTRY_COUNT; i++) {
  186.         cp0_index_write(i);
  187.         tlbwi();
  188.     }
  189.        
  190.     pfn_t start_frame = 0;
  191.     pfn_t frame;
  192.     bool avail = true;
  193.    
  194.     /* Walk through all 1 MB frames */
  195.     for (frame = 0; frame < ZERO_FRAMES; frame++) {
  196.         if (!frame_available(frame))
  197.             avail = false;
  198.         else {
  199.             if (frame_safe(frame)) {
  200.                 entry_lo_t lo0;
  201.                 entry_lo_t lo1;
  202.                 entry_hi_t hi;
  203.                 tlb_prepare_entry_lo(&lo0, false, true, true, false, frame << (ZERO_PAGE_WIDTH - 12));
  204.                 tlb_prepare_entry_lo(&lo1, false, false, false, false, 0);
  205.                 tlb_prepare_entry_hi(&hi, ZERO_PAGE_ASID, ZERO_PAGE_ADDR);
  206.                
  207.                 cp0_pagemask_write(ZERO_PAGE_MASK);
  208.                 cp0_entry_lo0_write(lo0.value);
  209.                 cp0_entry_lo1_write(lo1.value);
  210.                 cp0_entry_hi_write(hi.value);
  211.                 cp0_index_write(ZERO_PAGE_TLBI);
  212.                 tlbwi();
  213.                
  214.                 ZERO_PAGE_VALUE = 0;
  215.                 if (ZERO_PAGE_VALUE != 0)
  216.                     avail = false;
  217.                 else {
  218.                     ZERO_PAGE_VALUE = 0xdeadbeef;
  219.                     if (ZERO_PAGE_VALUE != 0xdeadbeef)
  220.                         avail = false;
  221. #if (MACHINE == lgxemul) || (MACHINE == bgxemul)
  222.                     else {
  223.                         ZERO_PAGE_VALUE_KSEG1(frame) = 0xaabbccdd;
  224.                         if (ZERO_PAGE_VALUE_KSEG1(frame) != 0xaabbccdd)
  225.                             avail = false;
  226.                     }
  227. #endif
  228.                 }
  229.             }
  230.         }
  231.        
  232.         if (!avail) {
  233.             frame_add_region(start_frame, frame);
  234.             start_frame = frame + 1;
  235.             avail = true;
  236.         }
  237.     }
  238.    
  239.     frame_add_region(start_frame, frame);
  240.    
  241.     /* Blacklist interrupt vector frame */
  242.     frame_mark_unavailable(0, 1);
  243.    
  244.     /* Cleanup */
  245.     cp0_pagemask_write(ZERO_PAGE_MASK);
  246.     cp0_entry_lo0_write(0);
  247.     cp0_entry_lo1_write(0);
  248.     cp0_entry_hi_write(0);
  249.     cp0_index_write(ZERO_PAGE_TLBI);
  250.     tlbwi();
  251.    
  252.     interrupts_restore(ipl);
  253. }
  254.  
  255.  
  256. void physmem_print(void)
  257. {
  258.     printf("Base       Size\n");
  259.     printf("---------- ----------\n");
  260.    
  261.     count_t i;
  262.     for (i = 0; i < phys_regions_count; i++) {
  263.         printf("%#010x %10u\n",
  264.             PFN2ADDR(phys_regions[i].start), PFN2ADDR(phys_regions[i].count));
  265.     }  
  266. }
  267.  
  268. /** @}
  269.  */
  270.