Subversion Repositories HelenOS-historic

Rev

Rev 1121 | Rev 1187 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2003-2004 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29.  
  30. #include <arch.h>
  31. #include <arch/cp0.h>
  32. #include <arch/exception.h>
  33. #include <arch/asm.h>
  34. #include <mm/as.h>
  35.  
  36. #include <userspace.h>
  37. #include <arch/console.h>
  38. #include <memstr.h>
  39. #include <proc/thread.h>
  40. #include <proc/uarg.h>
  41. #include <print.h>
  42. #include <syscall/syscall.h>
  43.  
  44. #include <arch/interrupt.h>
  45. #include <arch/drivers/arc.h>
  46. #include <console/chardev.h>
  47. #include <arch/debugger.h>
  48.  
  49. #include <arch/asm/regname.h>
  50.  
  51. /* Size of the code jumping to the exception handler code
  52.  * - J+NOP
  53.  */
  54. #define EXCEPTION_JUMP_SIZE    8
  55.  
  56. #define TLB_EXC ((char *) 0x80000000)
  57. #define NORM_EXC ((char *) 0x80000180)
  58. #define CACHE_EXC ((char *) 0x80000100)
  59.  
  60. void arch_pre_mm_init(void)
  61. {
  62.     /* It is not assumed by default */
  63.     interrupts_disable();
  64.    
  65.     /* Initialize dispatch table */
  66.     exception_init();
  67.     interrupt_init();
  68.  
  69.     arc_init();
  70.  
  71.     /* Copy the exception vectors to the right places */
  72.     memcpy(TLB_EXC, (char *)tlb_refill_entry, EXCEPTION_JUMP_SIZE);
  73.     memcpy(NORM_EXC, (char *)exception_entry, EXCEPTION_JUMP_SIZE);
  74.     memcpy(CACHE_EXC, (char *)cache_error_entry, EXCEPTION_JUMP_SIZE);
  75.  
  76.     /*
  77.      * Switch to BEV normal level so that exception vectors point to the kernel.
  78.      * Clear the error level.
  79.      */
  80.     cp0_status_write(cp0_status_read() & ~(cp0_status_bev_bootstrap_bit|cp0_status_erl_error_bit));
  81.  
  82.     /*
  83.      * Mask all interrupts
  84.      */
  85.     cp0_mask_all_int();
  86.     /*
  87.      * Unmask hardware clock interrupt.
  88.      */
  89.     cp0_unmask_int(TIMER_IRQ);
  90.  
  91.     /*
  92.      * Start hardware clock.
  93.      */
  94.     cp0_compare_write(cp0_compare_value + cp0_count_read());
  95.  
  96.     console_init();
  97.     debugger_init();
  98.    
  99.     /* Setup usermode */
  100.     init.cnt = 1;
  101.     init.tasks[0].addr = INIT_ADDRESS;
  102.     init.tasks[0].size = INIT_SIZE;
  103. }
  104.  
  105. void arch_post_mm_init(void)
  106. {
  107. }
  108.  
  109. void arch_pre_smp_init(void)
  110. {
  111. }
  112.  
  113. void arch_post_smp_init(void)
  114. {
  115. }
  116.  
  117. /* Stack pointer saved when entering user mode */
  118. /* TODO: How do we do it on SMP system???? */
  119.  
  120. /* Why the linker moves the variable 64K away in assembler
  121.  * when not in .text section ????????
  122.  */
  123. __address supervisor_sp __attribute__ ((section (".text")));
  124.  
  125. void userspace(uspace_arg_t *kernel_uarg)
  126. {
  127.     /* EXL=1, UM=1, IE=1 */
  128.     cp0_status_write(cp0_status_read() | (cp0_status_exl_exception_bit |
  129.                           cp0_status_um_bit |
  130.                           cp0_status_ie_enabled_bit));
  131.     cp0_epc_write((__address) kernel_uarg->uspace_entry);
  132.     userspace_asm(((__address) kernel_uarg->uspace_stack+PAGE_SIZE),
  133.               (__address) kernel_uarg->uspace_uarg,
  134.               (__address) kernel_uarg->uspace_entry);
  135.     while (1)
  136.         ;
  137. }
  138.  
  139. void before_thread_runs_arch(void)
  140. {
  141.     supervisor_sp = (__address) &THREAD->kstack[THREAD_STACK_SIZE-SP_DELTA];
  142. }
  143.  
  144. void after_thread_ran_arch(void)
  145. {
  146. }
  147.  
  148. /** Set thread-local-storage pointer
  149.  *
  150.  * We have it currently in K1, it is
  151.  * possible to have it separately in the future.
  152.  */
  153. __native sys_tls_set(__native addr)
  154. {
  155.     return 0;
  156. }
  157.