Subversion Repositories HelenOS

Rev

Rev 1494 | Rev 1589 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (C) 2006 Jakub Jermar
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /**
  30.  * @file    ddi.c
  31.  * @brief   Device Driver Interface functions.
  32.  *
  33.  * This file contains functions that comprise the Device Driver Interface.
  34.  * These are the functions for mapping physical memory and enabling I/O
  35.  * space to tasks.
  36.  */
  37.  
  38. #include <ddi/ddi.h>
  39. #include <ddi/ddi_arg.h>
  40. #include <proc/task.h>
  41. #include <security/cap.h>
  42. #include <mm/frame.h>
  43. #include <mm/as.h>
  44. #include <synch/spinlock.h>
  45. #include <syscall/copy.h>
  46. #include <arch.h>
  47. #include <align.h>
  48. #include <errno.h>
  49.  
  50. /** Map piece of physical memory into virtual address space of current task.
  51.  *
  52.  * @param pf Physical frame address of the starting frame.
  53.  * @param vp Virtual page address of the starting page.
  54.  * @param pages Number of pages to map.
  55.  * @param flags Address space area flags for the mapping.
  56.  *
  57.  * @return 0 on success, EPERM if the caller lacks capabilities to use this syscall,
  58.  *     ENOENT if there is no task matching the specified ID and ENOMEM if
  59.  *     there was a problem in creating address space area.
  60.  */
  61. static int ddi_physmem_map(__address pf, __address vp, count_t pages, int flags)
  62. {
  63.     ipl_t ipl;
  64.     cap_t caps;
  65.     mem_backend_data_t backend_data;
  66.  
  67.     backend_data.base = pf;
  68.     backend_data.frames = pages;
  69.    
  70.     /*
  71.      * Make sure the caller is authorised to make this syscall.
  72.      */
  73.     caps = cap_get(TASK);
  74.     if (!(caps & CAP_MEM_MANAGER))
  75.         return EPERM;
  76.  
  77.     ipl = interrupts_disable();
  78.     /* Lock the task and release the lock protecting tasks_btree. */
  79.     spinlock_lock(&TASK->lock);
  80.    
  81.     if (!as_area_create(TASK->as, flags, pages * PAGE_SIZE, vp, AS_AREA_ATTR_NONE,
  82.         &phys_backend, &backend_data)) {
  83.         /*
  84.          * The address space area could not have been created.
  85.          * We report it using ENOMEM.
  86.          */
  87.         spinlock_unlock(&TASK->lock);
  88.         interrupts_restore(ipl);
  89.         return ENOMEM;
  90.     }
  91.    
  92.     /*
  93.      * Mapping is created on-demand during page fault.
  94.      */
  95.    
  96.     spinlock_unlock(&TASK->lock);
  97.     interrupts_restore(ipl);
  98.     return 0;
  99. }
  100.  
  101. /** Enable range of I/O space for task.
  102.  *
  103.  * @param id Task ID of the destination task.
  104.  * @param ioaddr Starting I/O address.
  105.  * @param size Size of the enabled I/O space..
  106.  *
  107.  * @return 0 on success, EPERM if the caller lacks capabilities to use this syscall,
  108.  *     ENOENT if there is no task matching the specified ID.
  109.  */
  110. static int ddi_iospace_enable(task_id_t id, __address ioaddr, size_t size)
  111. {
  112.     ipl_t ipl;
  113.     cap_t caps;
  114.     task_t *t;
  115.     int rc;
  116.    
  117.     /*
  118.      * Make sure the caller is authorised to make this syscall.
  119.      */
  120.     caps = cap_get(TASK);
  121.     if (!(caps & CAP_IO_MANAGER))
  122.         return EPERM;
  123.    
  124.     ipl = interrupts_disable();
  125.     spinlock_lock(&tasks_lock);
  126.    
  127.     t = task_find_by_id(id);
  128.    
  129.     if (!t) {
  130.         /*
  131.          * There is no task with the specified ID.
  132.          */
  133.         spinlock_unlock(&tasks_lock);
  134.         interrupts_restore(ipl);
  135.         return ENOENT;
  136.     }
  137.  
  138.     /* Lock the task and release the lock protecting tasks_btree. */
  139.     spinlock_lock(&t->lock);
  140.     spinlock_unlock(&tasks_lock);
  141.  
  142.     rc = ddi_iospace_enable_arch(t, ioaddr, size);
  143.    
  144.     spinlock_unlock(&t->lock);
  145.     interrupts_restore(ipl);
  146.     return rc;
  147. }
  148.  
  149. /** Wrapper for SYS_MAP_PHYSMEM syscall.
  150.  *
  151.  * @param phys_base Physical base address to map
  152.  * @param virt_base Destination virtual address
  153.  * @param pages Number of pages
  154.  * @param flags Flags of newly mapped pages
  155.  *
  156.  * @return 0 on success, otherwise it returns error code found in errno.h
  157.  */
  158. __native sys_physmem_map(__native phys_base, __native virt_base, __native pages,
  159.              __native flags)
  160. {
  161.     return (__native) ddi_physmem_map(ALIGN_DOWN((__address) phys_base, FRAME_SIZE),
  162.                       ALIGN_DOWN((__address) virt_base, PAGE_SIZE), (count_t) pages,
  163.                       (int) flags);
  164. }
  165.  
  166. /** Wrapper for SYS_ENABLE_IOSPACE syscall.
  167.  *
  168.  * @param User space address of DDI argument structure.
  169.  *
  170.  * @return 0 on success, otherwise it returns error code found in errno.h
  171.  */
  172. __native sys_iospace_enable(ddi_ioarg_t *uspace_io_arg)
  173. {
  174.     ddi_ioarg_t arg;
  175.     int rc;
  176.    
  177.     rc = copy_from_uspace(&arg, uspace_io_arg, sizeof(ddi_ioarg_t));
  178.     if (rc != 0)
  179.         return (__native) rc;
  180.        
  181.     return (__native) ddi_iospace_enable((task_id_t) arg.task_id, (__address) arg.ioaddr, (size_t) arg.size);
  182. }
  183.  
  184. /** Disable or enable preemption.
  185.  *
  186.  * @param enable If non-zero, the preemption counter will be decremented, leading to potential
  187.  *       enabling of preemption. Otherwise the preemption counter will be incremented,
  188.  *       preventing preemption from occurring.
  189.  *
  190.  * @return Zero on success or EPERM if callers capabilities are not sufficient.
  191.  */
  192. __native sys_preempt_control(int enable)
  193. {
  194.         if (! cap_get(TASK) & CAP_PREEMPT_CONTROL)
  195.                 return EPERM;
  196.         if (enable)
  197.                 preemption_enable();
  198.         else
  199.                 preemption_disable();
  200.         return 0;
  201. }
  202.