Subversion Repositories HelenOS

Rev

Rev 4394 | Rev 4558 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2009 Lukas Mejdrech
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup arp
  30.  *  @{
  31.  */
  32.  
  33. /** @file
  34.  *  ARP module implementation.
  35.  *  @see arp.h
  36.  */
  37.  
  38. #include <async.h>
  39. #include <malloc.h>
  40. #include <mem.h>
  41. #include <rwlock.h>
  42. #include <stdio.h>
  43. #include <string.h>
  44. #include <task.h>
  45.  
  46. #include <ipc/ipc.h>
  47. #include <ipc/services.h>
  48.  
  49. #include "../../err.h"
  50. #include "../../messages.h"
  51. #include "../../modules.h"
  52.  
  53. #include "../../include/byteorder.h"
  54. #include "../../include/device.h"
  55. #include "../../include/arp_interface.h"
  56. #include "../../include/nil_interface.h"
  57. #include "../../include/protocol_map.h"
  58.  
  59. #include "../../structures/measured_strings.h"
  60. #include "../../structures/packet/packet.h"
  61. #include "../../structures/packet/packet_client.h"
  62.  
  63. #include "../il_messages.h"
  64.  
  65. #include "arp.h"
  66. #include "arp_header.h"
  67. #include "arp_oc.h"
  68. #include "arp_module.h"
  69. #include "arp_messages.h"
  70.  
  71. /** ARP global data.
  72.  */
  73. arp_globals_t   arp_globals;
  74.  
  75. /** Clears the whole cache.
  76.  *  @returns EOK on success.
  77.  */
  78. int arp_clean_cache_req( int arp_phone );
  79.  
  80. /** Clears the device specific data from the cache.
  81.  *  @param arp_phone The ARP module phone used for (semi)remote calls. Input parameter.
  82.  *  @param device_id The device identifier. Input parameter.
  83.  *  @returns EOK on success.
  84.  *  @returns ENOENT  if the device is not found in the cache.
  85.  */
  86. int arp_clear_device_req( int arp_phone, device_id_t device_id );
  87.  
  88. /** Creates new protocol specific data.
  89.  *  @param proto Protocol specific data. Output parameter.
  90.  *  @param service Protocol module service. Input parameter.
  91.  *  @param address Actual protocol device address. Input parameter.
  92.  *  @returns EOK on success.
  93.  *  @returns ENOMEM if there is not enough memory left.
  94.  */
  95. int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address );
  96.  
  97. /** Registers the device.
  98.  *  Creates new device entry in the cache or updates the protocol address if the device with the device identifier and the driver service exists.
  99.  *  @param device_id The device identifier. Input parameter.
  100.  *  @param service The device driver service. Input parameter.
  101.  *  @param protocol The protocol service. Input parameter.
  102.  *  @param address The actual device protocol address.
  103.  *  @returns EOK on success.
  104.  *  @returns EEXIST if another device with the same device identifier and different driver service exists.
  105.  *  @returns ENOMEM if there is not enough memory left.
  106.  *  @returns Other error codes as defined for the measured_strings_return() function.
  107.  */
  108. int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address );
  109.  
  110. /** Returns the hardware address for the given protocol address.
  111.  *  Sends the ARP request packet if the hardware address is not found in the cache.
  112.  *  @param device_id The device identifier. Input parameter.
  113.  *  @param protocol The protocol service. Input parameter.
  114.  *  @param target The target protocol address. Input parameter.
  115.  *  @returns The hardware address of the target.
  116.  *  @returns NULL if the target parameter is NULL.
  117.  *  @returns NULL if the device is not found.
  118.  *  @returns NULL if the device packet is too small to send a&nbsp;request.
  119.  *  @returns NULL if the hardware address is not found in the cache.
  120.  */
  121. measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target );
  122.  
  123. /** Processes the received ARP packet.
  124.  *  Updates the source hardware address if the source entry exists or the packet is targeted to my protocol address.
  125.  *  Responses to the ARP request if the packet is the ARP request and is targeted to my address.
  126.  *  @param device_id The source device identifier. Input parameter.
  127.  *  @param packet The received packet. Input/output parameter.
  128.  *  @returns EOK on success and the packet is no longer needed.
  129.  *  @returns 1 on success and the packet has been reused.
  130.  *  @returns EINVAL if the packet is too small to carry the ARP packet.
  131.  *  @returns EINVAL if the received address lengths differs from the registered values.
  132.  *  @returns ENOENT if the device is not found in the cache.
  133.  *  @returns ENOENT if the protocol for the device is not found in the cache.
  134.  *  @returns ENOMEM if there is not enough memory left.
  135.  */
  136. int arp_receive_message( device_id_t device_id, packet_t packet );
  137.  
  138. /** Clears the device specific data.
  139.  *  @param device The device specific data.
  140.  */
  141. void    clear_device( arp_device_ref device );
  142.  
  143. DEVICE_MAP_IMPLEMENT( arp_cache, arp_device_t )
  144.  
  145. INT_MAP_IMPLEMENT( arp_protos, arp_proto_t )
  146.  
  147. GENERIC_CHAR_MAP_IMPLEMENT( arp_addr, measured_string_t )
  148.  
  149. int arp_task_get_id( void ){
  150.     return task_get_id();
  151. }
  152.  
  153. int arp_clear_device_req( int arp_phone, device_id_t device_id ){
  154.     arp_device_ref  device;
  155.  
  156.     rwlock_write_lock( & arp_globals.lock );
  157.     device = arp_cache_find( & arp_globals.cache, device_id );
  158.     if( ! device ){
  159.         rwlock_write_unlock( & arp_globals.lock );
  160.         return ENOENT;
  161.     }
  162.     clear_device( device );
  163.     printf( "Device %d cleared\n", device_id );
  164.     rwlock_write_unlock( & arp_globals.lock );
  165.     return EOK;
  166. }
  167.  
  168. int arp_clean_cache_req( int arp_phone ){
  169.     int             count;
  170.     arp_device_ref  device;
  171.  
  172.     rwlock_write_lock( & arp_globals.lock );
  173.     for( count = arp_cache_count( & arp_globals.cache ) - 1; count >= 0; -- count ){
  174.         device = arp_cache_get_index( & arp_globals.cache, count );
  175.         if( device ){
  176.             clear_device( device );
  177.             if( device->addr_data ) free( device->addr_data );
  178.             if( device->broadcast_data ) free( device->broadcast_data );
  179.         }
  180.     }
  181.     arp_cache_clear( & arp_globals.cache );
  182.     rwlock_write_unlock( & arp_globals.lock );
  183.     printf( "Cache cleaned\n" );
  184.     return EOK;
  185. }
  186.  
  187. int arp_device_req( int arp_phone, device_id_t device_id, services_t protocol, services_t netif, measured_string_ref address ){
  188.     ERROR_DECLARE;
  189.  
  190.     measured_string_ref tmp;
  191.  
  192.     tmp = measured_string_copy( address );
  193.     if( ERROR_OCCURRED( arp_device_message( device_id, netif, protocol, tmp ))){
  194.         free( tmp->value );
  195.         free( tmp );
  196.     }
  197.     return ERROR_CODE;
  198. }
  199.  
  200. int arp_translate_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address, measured_string_ref * translation, char ** data ){
  201.     measured_string_ref tmp;
  202.  
  203.     rwlock_read_lock( & arp_globals.lock );
  204.     tmp = arp_translate_message( device_id, protocol, address );
  205.     if( tmp ){
  206.         * translation = measured_string_copy( tmp );
  207.         rwlock_read_unlock( & arp_globals.lock );
  208.         if( * translation ){
  209.             * data = ( ** translation ).value;
  210.             return EOK;
  211.         }else{
  212.             return ENOMEM;
  213.         }
  214.     }else{
  215.         rwlock_read_unlock( & arp_globals.lock );
  216.         return ENOENT;
  217.     }
  218. }
  219.  
  220. int arp_initialize( async_client_conn_t client_connection ){
  221.     ERROR_DECLARE;
  222.  
  223.     rwlock_initialize( & arp_globals.lock );
  224.     rwlock_write_lock( & arp_globals.lock );
  225.     arp_globals.client_connection = client_connection;
  226.     ERROR_PROPAGATE( arp_cache_initialize( & arp_globals.cache ));
  227.     rwlock_write_unlock( & arp_globals.lock );
  228.     return EOK;
  229. }
  230.  
  231. int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address ){
  232.     ERROR_DECLARE;
  233.  
  234.     * proto = ( arp_proto_ref ) malloc( sizeof( arp_proto_t ));
  235.     if( !( * proto )) return ENOMEM;
  236.     ( ** proto ).service = service;
  237.     ( ** proto ).addr = address;
  238.     ( ** proto ).addr_data = address->value;
  239.     if( ERROR_OCCURRED( arp_addr_initialize( &( ** proto).addresses ))){
  240.         free( * proto );
  241.         return ERROR_CODE;
  242.     }
  243.     return EOK;
  244. }
  245.  
  246. int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address ){
  247.     ERROR_DECLARE;
  248.  
  249.     arp_device_ref  device;
  250.     arp_proto_ref   proto;
  251.     int             index;
  252.  
  253.     rwlock_write_lock( & arp_globals.lock );
  254.     // an existing device?
  255.     device = arp_cache_find( & arp_globals.cache, device_id );
  256.     if( device ){
  257.         if( device->service != service ){
  258.             printf( "Device %d already exists\n", device->device_id );
  259.             rwlock_write_unlock( & arp_globals.lock );
  260.             return EEXIST;
  261.         }
  262.         proto = arp_protos_find( & device->protos, protocol );
  263.         if( proto ){
  264.             free( proto->addr );
  265.             free( proto->addr_data );
  266.             proto->addr = address;
  267.             proto->addr_data = address->value;
  268.         }else{
  269.             if( ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){
  270.                 rwlock_write_unlock( & arp_globals.lock );
  271.                 return ERROR_CODE;
  272.             }
  273.             index = arp_protos_add( & device->protos, proto->service, proto );
  274.             if( index < 0 ){
  275.                 rwlock_write_unlock( & arp_globals.lock );
  276.                 free( proto );
  277.                 return index;
  278.             }
  279.             printf( "New protocol added:\n\tdevice id\t= %d\n\tproto\t= %d", device_id, protocol );
  280.         }
  281.     }else{
  282.         index = hardware_map( service );
  283.         if( ! index ) return ENOENT;
  284.         // create a new device
  285.         device = ( arp_device_ref ) malloc( sizeof( arp_device_t ));
  286.         if( ! device ){
  287.             rwlock_write_unlock( & arp_globals.lock );
  288.             return ENOMEM;
  289.         }
  290.         device->hardware = index;
  291.         device->device_id = device_id;
  292.         if( ERROR_OCCURRED( arp_protos_initialize( & device->protos ))
  293.         || ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){
  294.             rwlock_write_unlock( & arp_globals.lock );
  295.             free( device );
  296.             return ERROR_CODE;
  297.         }
  298.         index = arp_protos_add( & device->protos, proto->service, proto );
  299.         if( index < 0 ){
  300.             rwlock_write_unlock( & arp_globals.lock );
  301.             arp_protos_destroy( & device->protos );
  302.             free( device );
  303.             return index;
  304.         }
  305.         device->service = service;
  306.         // bind the new one
  307.         device->phone = bind_service( device->service, device->device_id, SERVICE_ARP, 0, arp_globals.client_connection );
  308.         if( device->phone < 0 ){
  309.             rwlock_write_unlock( & arp_globals.lock );
  310.             arp_protos_destroy( & device->protos );
  311.             free( device );
  312.             return EREFUSED;
  313.         }
  314.         // get packet dimensions
  315.         if( ERROR_OCCURRED( nil_packet_size_req( device->phone, device_id, & device->addr_len, & device->prefix, & device->content, & device->suffix ))){
  316.             rwlock_write_unlock( & arp_globals.lock );
  317.             arp_protos_destroy( & device->protos );
  318.             free( device );
  319.             return ERROR_CODE;
  320.         }
  321.         // get hardware address
  322.         if( ERROR_OCCURRED( nil_get_addr( device->phone, device_id, & device->addr, & device->addr_data ))){
  323.             rwlock_write_unlock( & arp_globals.lock );
  324.             arp_protos_destroy( & device->protos );
  325.             free( device );
  326.             return ERROR_CODE;
  327.         }
  328.         // get broadcast address
  329.         if( ERROR_OCCURRED( nil_get_broadcast_addr( device->phone, device_id, & device->broadcast_addr, & device->broadcast_data ))){
  330.             rwlock_write_unlock( & arp_globals.lock );
  331.             free( device->addr );
  332.             free( device->addr_data );
  333.             arp_protos_destroy( & device->protos );
  334.             free( device );
  335.             return ERROR_CODE;
  336.         }
  337.         if( ERROR_OCCURRED( arp_cache_add( & arp_globals.cache, device->device_id, device ))){
  338.             rwlock_write_unlock( & arp_globals.lock );
  339.             free( device->addr );
  340.             free( device->addr_data );
  341.             free( device->broadcast_addr );
  342.             free( device->broadcast_data );
  343.             arp_protos_destroy( & device->protos );
  344.             free( device );
  345.             return ERROR_CODE;
  346.         }
  347.         printf( "New device registered:\n\tid\t= %d\n\ttype\t= 0x%x\n\tservice\t= %d\n\tproto\t= %d\n", device->device_id, device->hardware, device->service, protocol );
  348.     }
  349.     rwlock_write_unlock( & arp_globals.lock );
  350.     return EOK;
  351. }
  352.  
  353. measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target ){
  354.     arp_device_ref      device;
  355.     arp_proto_ref       proto;
  356.     measured_string_ref addr;
  357.     size_t              length;
  358.     packet_t            packet;
  359.     arp_header_ref      header;
  360.  
  361.     if( ! target ) return NULL;
  362.     device = arp_cache_find( & arp_globals.cache, device_id );
  363.     if( ! device ) return NULL;
  364.     proto = arp_protos_find( & device->protos, protocol );
  365.     if(( ! proto ) || ( proto->addr->length != target->length )) return NULL;
  366.     addr = arp_addr_find( & proto->addresses, target->value, target->length );
  367.     if( addr ) return addr;
  368.     // ARP packet content size = header + ( address + translation ) * 2
  369.     length = 8 + ( CONVERT_SIZE( char, uint8_t, proto->addr->length ) + CONVERT_SIZE( char, uint8_t, device->addr->length )) * 2;
  370.     if( length > device->content ) return NULL;
  371.     packet = packet_get_4( arp_globals.net_phone, device->addr_len, device->prefix, length, device->suffix );
  372.     if( ! packet ) return NULL;
  373.     header = ( arp_header_ref ) packet_suffix( packet, length );
  374.     if( ! header ){
  375.         pq_release( arp_globals.net_phone, packet_get_id( packet ));
  376.         return NULL;
  377.     }
  378.     header->hardware = htons( device->hardware );
  379.     header->hardware_length = device->addr->length;
  380.     header->protocol = htons( protocol_map( device->service, protocol ));
  381.     header->protocol_length = proto->addr->length;
  382.     header->operation = htons( ARPOP_REQUEST );
  383.     length = sizeof( arp_header_t );
  384.     memcpy((( uint8_t * ) header ) + length, device->addr->value, device->addr->length );
  385.     length += device->addr->length;
  386.     memcpy((( uint8_t * ) header ) + length, proto->addr->value, proto->addr->length );
  387.     length += proto->addr->length;
  388.     bzero((( uint8_t * ) header ) + length, device->addr->length );
  389.     length += device->addr->length;
  390.     memcpy((( uint8_t * ) header ) + length, target->value, target->length );
  391.     if( packet_set_addr( packet, ( uint8_t * ) device->addr->value, ( uint8_t * ) device->broadcast_addr->value, CONVERT_SIZE( char, uint8_t, device->addr->length )) != EOK ){
  392.         pq_release( arp_globals.net_phone, packet_get_id( packet ));
  393.         return NULL;
  394.     }
  395.     nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );
  396.     return NULL;
  397. }
  398.  
  399. int arp_receive_message( device_id_t device_id, packet_t packet ){
  400.     ERROR_DECLARE;
  401.  
  402.     size_t              length;
  403.     arp_header_ref      header;
  404.     arp_device_ref      device;
  405.     arp_proto_ref       proto;
  406.     measured_string_ref hw_source;
  407.     uint8_t *           src_hw;
  408.     uint8_t *           src_proto;
  409.     uint8_t *           des_hw;
  410.     uint8_t *           des_proto;
  411.  
  412.     length = packet_get_data_length( packet );
  413.     if( length <= sizeof( arp_header_t )) return EINVAL;
  414.     device = arp_cache_find( & arp_globals.cache, device_id );
  415.     if( ! device ) return ENOENT;
  416.     header = ( arp_header_ref ) packet_get_data( packet );
  417.     if(( ntohs( header->hardware ) != device->hardware )
  418.     || ( length < sizeof( arp_header_t ) + ( header->hardware_length + header->protocol_length ) * 2 )){
  419.         return EINVAL;
  420.     }
  421.     proto = arp_protos_find( & device->protos, protocol_unmap( device->service, ntohs( header->protocol )));
  422.     if( ! proto ) return ENOENT;
  423.     src_hw = (( uint8_t * ) header ) + sizeof( arp_header_t );
  424.     src_proto = src_hw + header->hardware_length;
  425.     des_hw = src_proto + header->protocol_length;
  426.     des_proto = des_hw + header->hardware_length;
  427.     hw_source = arp_addr_find( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ));
  428.     // exists?
  429.     if( hw_source ){
  430.         if( hw_source->length != CONVERT_SIZE( uint8_t, char, header->hardware_length )){
  431.             return EINVAL;
  432.         }
  433.         memcpy( hw_source->value, src_hw, hw_source->length );
  434.     }
  435.     // is my protocol address?
  436.     if( proto->addr->length != CONVERT_SIZE( uint8_t, char, header->protocol_length )){
  437.         return EINVAL;
  438.     }
  439.     if( ! str_lcmp( proto->addr->value, ( char * ) des_proto, proto->addr->length )){
  440.         // not already upadted?
  441.         if( ! hw_source ){
  442.             hw_source = measured_string_create_bulk(( char * ) src_hw, CONVERT_SIZE( uint8_t, char, header->hardware_length ));
  443.             if( ! hw_source ) return ENOMEM;
  444.             ERROR_PROPAGATE( arp_addr_add( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ), hw_source ));
  445.         }
  446.         if( ntohs( header->operation ) == ARPOP_REQUEST ){
  447.             header->operation = htons( ARPOP_REPLY );
  448.             memcpy( des_proto, src_proto, header->protocol_length );
  449.             memcpy( src_proto, proto->addr->value, header->protocol_length );
  450.             memcpy( src_hw, device->addr->value, device->addr_len );
  451.             memcpy( des_hw, hw_source->value, header->hardware_length );
  452.             ERROR_PROPAGATE( packet_set_addr( packet, src_hw, des_hw, header->hardware_length ));
  453.             nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );
  454.             return 1;
  455.         }
  456.     }
  457.     return EOK;
  458. }
  459.  
  460. void clear_device( arp_device_ref device ){
  461.     int             count;
  462.     arp_proto_ref   proto;
  463.  
  464.     for( count = arp_protos_count( & device->protos ) - 1; count >= 0; -- count ){
  465.         proto = arp_protos_get_index( & device->protos, count );
  466.         if( proto ){
  467.             if( proto->addr ) free( proto->addr );
  468.             if( proto->addr_data ) free( proto->addr_data );
  469.             arp_addr_destroy( & proto->addresses );
  470.         }
  471.     }
  472.     arp_protos_clear( & device->protos );
  473. }
  474.  
  475. int arp_connect_module( services_t service ){
  476.     return EOK;
  477. }
  478.  
  479. int arp_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count ){
  480.     ERROR_DECLARE;
  481.  
  482.     measured_string_ref address;
  483.     measured_string_ref translation;
  484.     char *              data;
  485.     packet_t            packet;
  486.     packet_t            next;
  487.  
  488. //  printf( "message %d - %d\n", IPC_GET_METHOD( * call ), NET_ARP_FIRST );
  489.     * answer_count = 0;
  490.     switch( IPC_GET_METHOD( * call )){
  491.         case IPC_M_PHONE_HUNGUP:
  492.             return EOK;
  493.         case NET_ARP_DEVICE:
  494.             ERROR_PROPAGATE( measured_strings_receive( & address, & data, 1 ));
  495.             if( ERROR_OCCURRED( arp_device_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), ARP_GET_NETIF( call ), address ))){
  496.                 free( address );
  497.                 free( data );
  498.             }
  499.             return ERROR_CODE;
  500.         case NET_ARP_TRANSLATE:
  501.             ERROR_PROPAGATE( measured_strings_receive( & address, & data, 1 ));
  502.             rwlock_read_lock( & arp_globals.lock );
  503.             translation = arp_translate_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), address );
  504.             free( address );
  505.             free( data );
  506.             if( ! translation ){
  507.                 rwlock_read_unlock( & arp_globals.lock );
  508.                 return ENOENT;
  509.             }
  510.             ERROR_CODE = measured_strings_reply( translation, 1 );
  511.             rwlock_read_unlock( & arp_globals.lock );
  512.             return ERROR_CODE;
  513.         case NET_ARP_CLEAR_DEVICE:
  514.             return arp_clear_device_req( 0, IPC_GET_DEVICE( call ));
  515.         case NET_ARP_CLEAN_CACHE:
  516.             return arp_clean_cache_req( 0 );
  517.         case NET_IL_DEVICE_STATE:
  518.             // do nothing - keep the cache
  519.             return EOK;
  520.         case NET_IL_RECEIVED:
  521.             if( ! ERROR_OCCURRED( packet_translate( arp_globals.net_phone, & packet, IPC_GET_PACKET( call )))){
  522.                 rwlock_read_lock( & arp_globals.lock );
  523.                 do{
  524.                     next = pq_next( packet );
  525.                     pq_detach( packet );
  526.                     ERROR_CODE = arp_receive_message( IPC_GET_DEVICE( call ), packet );
  527.                     if( ERROR_CODE != 1 ) pq_release( arp_globals.net_phone, packet_get_id( packet ));
  528.                     packet = next;
  529.                 }while( packet );
  530.                 rwlock_read_unlock( & arp_globals.lock );
  531.             }
  532.             return ERROR_CODE;
  533.     }
  534.     return ENOTSUP;
  535. }
  536.  
  537. /** @}
  538.  */
  539.