Subversion Repositories HelenOS

Rev

Rev 2214 | Rev 2263 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright (c) 2007 Petr Stepan
  3.  * All rights reserved.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  *
  9.  * - Redistributions of source code must retain the above copyright
  10.  *   notice, this list of conditions and the following disclaimer.
  11.  * - Redistributions in binary form must reproduce the above copyright
  12.  *   notice, this list of conditions and the following disclaimer in the
  13.  *   documentation and/or other materials provided with the distribution.
  14.  * - The name of the author may not be used to endorse or promote products
  15.  *   derived from this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  18.  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  19.  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  20.  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  21.  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  22.  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  23.  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  24.  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25.  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26.  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27.  */
  28.  
  29. /** @addtogroup arm32
  30.  * @{
  31.  */
  32. /** @file
  33.  */
  34.  
  35. #include <arch/asm.h>
  36. #include <arch/regutils.h>
  37. #include <ddi/irq.h>
  38. #include <arch/drivers/gxemul.h>
  39. #include <interrupt.h>
  40.  
  41. #define IRQ_COUNT 8
  42.  
  43.  
  44. /** Disable interrupts.
  45.  *
  46.  * @return Old interrupt priority level.
  47.  */
  48. ipl_t interrupts_disable(void)
  49. {
  50.     ipl_t ipl = current_status_reg_read();
  51.  
  52.     current_status_reg_control_write(ipl & ~STATUS_REG_IE_ENABLED_BIT);
  53.    
  54.     return ipl;
  55. }
  56.  
  57. /** Enable interrupts.
  58.  *
  59.  * @return Old interrupt priority level.
  60.  */
  61. ipl_t interrupts_enable(void)
  62. {
  63.     ipl_t ipl = current_status_reg_read();
  64.  
  65.     current_status_reg_control_write(ipl | STATUS_REG_IE_ENABLED_BIT);
  66.  
  67.     return ipl;
  68. }
  69.  
  70. /** Restore interrupt priority level.
  71.  *
  72.  * @param ipl Saved interrupt priority level.
  73.  */
  74. void interrupts_restore(ipl_t ipl)
  75. {
  76.     current_status_reg_control_write(current_status_reg_read() |
  77.             (ipl & STATUS_REG_IE_ENABLED_BIT));
  78. }
  79.  
  80. /** Read interrupt priority level.
  81.  *
  82.  * @return Current interrupt priority level.
  83.  */
  84. ipl_t interrupts_read(void)
  85. {
  86.     return current_status_reg_read();
  87. }
  88.  
  89. /** Initialize basic tables for exception dispatching
  90.  * and starts the timer.
  91.  */
  92. void interrupt_init(void)
  93. {
  94.     irq_init(IRQ_COUNT, IRQ_COUNT);
  95.  
  96.     gxemul_timer_irq_init();
  97.     gxemul_timer_start(GXEMUL_TIMER_FREQ);
  98. }
  99.  
  100.  
  101. /** @}
  102.  */
  103.